Patchwork Linux USB Devel

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 ... 56 57 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[v5,3/6] usb:common Patch simplify usb_decode_set_clear_feature function. - - - 2019-04-10 Pawel Laszczak New
[v5,2/6] usb:common Separated decoding functions from dwc3 driver. - - - 2019-04-10 Pawel Laszczak New
[v5,1/6] dt-bindings: add binding for USBSS-DRD controller. - 1 - 2019-04-10 Pawel Laszczak New
usb: uas: fix usb subsystem hang after power off hub port - - - 2019-04-09 Alan Stern New
usb:host: fix divide-by-zero in function fhci_queue_urb - - - 2019-04-09 zhuyan New
[5/5] usb: gadget: udc: lpc32xx: rework interrupt handling - - - 2019-04-09 Alexandre Belloni New
[4/5] usb: gadget: udc: lpc32xx: add support for stotg04 phy - - - 2019-04-09 Alexandre Belloni New
[3/5] usb: gadget: udc: lpc32xx: properly setup phy interrupts - - - 2019-04-09 Alexandre Belloni New
[2/5] usb: gadget: udc: lpc32xx: simplify vbus handling - - - 2019-04-09 Alexandre Belloni New
[1/5] usb: gadget: udc: lpc32xx: simplify probe - - - 2019-04-09 Alexandre Belloni New
[v2] usb: serial: defer URB submission for ftdi_sio - - - 2019-04-09 Ramachandran Srinivasan (BRT-SG) New
[v3,6/6] usb: ohci-da8xx: drop the vbus GPIO 1 - - 2019-04-09 Bartosz Golaszewski New
[v3,5/6] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx - - - 2019-04-09 Bartosz Golaszewski New
[v3,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx - - - 2019-04-09 Bartosz Golaszewski New
[v3,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired 1 - - 2019-04-09 Bartosz Golaszewski New
[v3,2/6] usb: ohci-da8xx: let the regulator framework keep track of use count 1 - - 2019-04-09 Bartosz Golaszewski New
[v3,1/6] ARM: davinci: add missing sentinels to GPIO lookup tables - - - 2019-04-09 Bartosz Golaszewski New
Deferred URB submission for timesharing the DMA channels of DWC_OTG host controller in Raspberry PI - - - 2019-04-08 Ramachandran Srinivasan (BRT-SG) New
net: lan78xx: fix "enabled interrupts" warninig - - - 2019-04-08 Jisheng Zhang New
[v2,5/5] usb: dwc2: gadget: Move gadget phy init into core phy init - - - 2019-04-05 Jules Maselbas New
[v2,4/5] usb: dwc2: Move phy init into core - - - 2019-04-05 Jules Maselbas New
[v2,3/5] usb: dwc2: gadget: Replace phyif with phy_utmi_width - - - 2019-04-05 Jules Maselbas New
[v2,2/5] usb: dwc2: gadget: Remove duplicated phy init - - - 2019-04-05 Jules Maselbas New
[v2,1/5] usb: dwc2: Move UTMI_PHY_DATA defines closer - - - 2019-04-05 Jules Maselbas New
[v2,2/2] r8152: Refresh MAC address during USBDEVFS_RESET - - - 2019-04-04 Mario Limonciello New
[v2,1/2] r8152: remove extra action copying ethernet address - - - 2019-04-04 Mario Limonciello New
[v2,3/3] usb: musb: jz4740: obtain USB PHY from devicetree - - - 2019-04-04 Paul Cercueil New
[v2,2/3] usb: musb: jz4740: Let the platform probe the PHY - - - 2019-04-04 Paul Cercueil New
[v2,1/3] dt-bindings: usb: Add usb-phy property to the jz4740-musb node - 1 - 2019-04-04 Paul Cercueil New
usb: musb: Disable pullup in gadget setup - - - 2019-04-04 Paul Cercueil New
[6/6] usb: musb: Decrease URB starting latency in musb_advance_schedule() - - - 2019-04-03 Matwey V. Kornilov New
[5/6] usb: musb: Introduce musb_start_urb() - - - 2019-04-03 Matwey V. Kornilov New
[4/6] usb: musb: Rename musb_start_urb() to musb_start_next_urb() - - - 2019-04-03 Matwey V. Kornilov New
[3/6] usb: musb: Introduce musb_qh_free() helper function - - - 2019-04-03 Matwey V. Kornilov New
[2/6] usb: musb: Introduce musb_qh_empty() helper function - - - 2019-04-03 Matwey V. Kornilov New
[1/6] usb: musb: Use USB_DIR_IN when calling musb_advance_schedule() - - - 2019-04-03 Matwey V. Kornilov New
[V6,3/3] USB: serial: f81232: implement break control - - - 2019-04-03 Ji-Ze Hong (Peter Hong) New
[V6,2/3] USB: serial: f81232: add high baud rate support - - - 2019-04-03 Ji-Ze Hong (Peter Hong) New
[V6,1/3] USB: serial: f81232: clear overrun flag - 1 - 2019-04-03 Ji-Ze Hong (Peter Hong) New
[V5,3/3] USB: serial: f81232: implement break control - - - 2019-04-03 Ji-Ze Hong (Peter Hong) New
[V5,2/3] USB: serial: f81232: add high baud rate support - - - 2019-04-03 Ji-Ze Hong (Peter Hong) New
[V5,1/3] USB: serial: f81232: clear overrun flag - - - 2019-04-03 Ji-Ze Hong (Peter Hong) New
[v3,6/6] usb: mtu3: register a USB Role Switch for dual role mode - - - 2019-04-03 Chunfeng Yun New
[v3,5/6] usb: roles: add USB Type-B GPIO connector driver - - - 2019-04-03 Chunfeng Yun New
[v3,4/6] usb: roles: add API to get usb_role_switch by node - - - 2019-04-03 Chunfeng Yun New
[v3,3/6] dt-bindings: usb: mtu3: add properties about USB Role Switch - - - 2019-04-03 Chunfeng Yun New
[v3,2/6] dt-bindings: usb: add binding for Type-B GPIO connector driver - - - 2019-04-03 Chunfeng Yun New
[v3,1/6] dt-bindings: connector: add optional properties for Type-B - - - 2019-04-03 Chunfeng Yun New
[5/5] usb: dwc2: gadget: Move gadget phy init into core phy init - - - 2019-04-02 Jules Maselbas New
[4/5] usb: dwc2: gadget: Replace phyif with phy_utmi_width - - - 2019-04-02 Jules Maselbas New
[3/5] usb: dwc2: gadget: Remove duplicated phy init - - - 2019-04-02 Jules Maselbas New
[2/5] usb: dwc2: Move phy init into core - - - 2019-04-02 Jules Maselbas New
[1/5] usb: dwc2: Move UTMI_PHY_DATA defines closer - - - 2019-04-02 Jules Maselbas New
usb: xhci: inherit dma_mask from bus if set correctly - - - 2019-04-02 Pankaj Dubey New
[2/2] USB: serial: pl2303: fix tranceiver suspend mode - 1 - 2019-04-02 Johan Hovold New
[1/2] USB: serial: pl2303: fix non-supported xon/xoff - 1 - 2019-04-02 Johan Hovold New
Mass Storage Gadget Device Falls from SuperSpeed to High Speed - - - 2019-04-02 Rob Weber New
[V4,3/3] USB: serial: f81232: implement break control - - - 2019-04-02 Ji-Ze Hong (Peter Hong) New
[V4,2/3] USB: serial: f81232: add high baud rate support - - - 2019-04-02 Ji-Ze Hong (Peter Hong) New
[V4,1/3] USB: serial: f81232: clear overrun flag - - - 2019-04-02 Ji-Ze Hong (Peter Hong) New
[v2] soc: sunxi: Fix missing dependency on REGMAP_MMIO 1 - - 2019-04-01 Samuel Holland New
[v2] usb: host: xhci: Support running urb giveback in tasklet context - - - 2019-04-01 Suwan Kim New
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices - - - 2019-04-01 Biju Das New
[03/12] dt-bindings: usb: ehci-r8a77470 devicetree binding document - 1 - 2019-04-01 Biju Das New
[v3] HID: add driver for U2F Zero built-in LED and RNG - - - 2019-04-01 Andrej Shadura New
usb: gadget: dwc2: fix zlp handling 1 - - 2019-04-01 Andrzej Pietrasiewicz New
[v2,6/6] arm64: tegra: Remove regulator hacks on Jetson TX2 - - - 2019-04-01 Thierry Reding New
[v2,5/6] arm64: tegra: Enable XUSB on P2771 - - - 2019-04-01 Thierry Reding New
[v2,4/6] arm64: tegra: Add XUSB and pad controller on Tegra186 - 1 - 2019-04-01 Thierry Reding New
[v2,3/6] usb: host: xhci-tegra: Add Tegra186 XUSB support 1 - - 2019-04-01 Thierry Reding New
[v2,2/6] usb: host: xhci-tegra: Selectively program IPFS 1 - - 2019-04-01 Thierry Reding New
[v2,1/6] dt-bindings: usb: xhci-tegra: Add Tegra186 support - 2 - 2019-04-01 Thierry Reding New
usb: typec: Registering real device entries for the muxes - - - 2019-04-01 Heikki Krogerus New
[RESEND,V3,3/3] USB: serial: f81232: implement break control - - - 2019-04-01 Ji-Ze Hong (Peter Hong) New
[RESEND,V3,2/3] USB: serial: f81232: add high baud rate support - - - 2019-04-01 Ji-Ze Hong (Peter Hong) New
[RESEND,V3,1/3] USB: serial: f81232: clear overrun flag - - - 2019-04-01 Ji-Ze Hong (Peter Hong) New
[next] usb: mtu3: get optional clock by devm_clk_get_optional() - - - 2019-03-30 Chunfeng Yun New
[5/5] usb: chipidea: msm: get optional clock by devm_clk_get_optional() 1 - - 2019-03-30 Chunfeng Yun New
[4/5] usb: dwc2: get optional clock by devm_clk_get_optional() 1 - - 2019-03-30 Chunfeng Yun New
[3/5] usb: misc: usb3503: get optional clock by devm_clk_get_optional() - - - 2019-03-30 Chunfeng Yun New
[2/5] usb: host: xhci-plat: get optional clock by devm_clk_get_optional() - - - 2019-03-30 Chunfeng Yun New
[1/5] usb: xhci-mtk: get optional clock by devm_clk_get_optional() - - - 2019-03-30 Chunfeng Yun New
usb: dwc2: gadget: add scatter-gather mode - - - 2019-03-29 Andrzej Pietrasiewicz New
[v2,6/6] usb: ohci-da8xx: drop the vbus GPIO - - - 2019-03-29 Bartosz Golaszewski New
[v2,5/6] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx - - - 2019-03-29 Bartosz Golaszewski New
[v2,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx - - - 2019-03-29 Bartosz Golaszewski New
[v2,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired - - - 2019-03-29 Bartosz Golaszewski New
[v2,2/6] usb: ohci-da8xx: let the regulator framework keep track of use count - - - 2019-03-29 Bartosz Golaszewski New
[v2,1/6] ARM: davinci: add missing sentinels to GPIO lookup tables - - - 2019-03-29 Bartosz Golaszewski New
[V3,3/3] USB: serial: f81232: implement break control - - - 2019-03-29 Ji-Ze Hong (Peter Hong) New
[V3,2/3] USB: serial: f81232: add high baud rate support - - - 2019-03-29 Ji-Ze Hong (Peter Hong) New
[V3,1/3] USB: serial: f81232: clear overrun flag - - - 2019-03-29 Ji-Ze Hong (Peter Hong) New
[v5,13/13] dts: hi3660: Add support for usb on Hikey960 - - - 2019-03-29 Yu Chen New
[v5,12/13] usb: gadget: Add configfs attribuite for controling match_existing_only - - - 2019-03-29 Yu Chen New
[v5,11/13] hikey960: Support usb functionality of Hikey960 - - - 2019-03-29 Yu Chen New
[v5,10/13] usb: dwc3: Registering a role switch in the DRD code. - - - 2019-03-29 Yu Chen New
[v5,09/13] usb: roles: Add usb role switch notifier. - 1 - 2019-03-29 Yu Chen New
[v5,08/13] usb: roles: Introduce stubs for the exiting functions in role.h. - 1 - 2019-03-29 Yu Chen New
[v5,07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon - 1 - 2019-03-29 Yu Chen New
[v5,06/13] usb: dwc3: Increase timeout for CmdAct cleared by device controller - - - 2019-03-29 Yu Chen New