| usb: core: add option of only authorizing internal devices |
- - - |
2019-02-17 |
Dmitry Torokhov |
|
New |
| usb: core: skip interfaces disabled in devicetree |
- - - |
2019-02-16 |
Måns Rullgård |
|
New |
| [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+ |
- - - |
2019-02-16 |
Stanislaw Gruszka |
|
New |
| r8152: Add support for MAC address pass through on RTL8153-BD |
- - - |
2019-02-16 |
David Chen |
|
New |
| patch "usb: f_fs: Avoid crash due to out-of-scope stack ptr access" added to usb-next |
- - - |
2019-02-15 |
Greg Kroah-Hartman |
|
New |
| [v3] usb: chipidea: Grab the (legacy) USB PHY by phandle first |
- - - |
2019-02-15 |
Paul Kocialkowski |
|
New |
| [v2,-next] usb: host: oxu210hp-hcd: remove set but not used variables 'uframes, transfer_buffer_length' |
- - - |
2019-02-15 |
YueHaibing |
|
New |
| qmi_wwan: apply SET_DTR quirk to Sierra WP7607 |
1 - - |
2019-02-15 |
Beniamino Galvani |
|
New |
| patch "usb: f_fs: Avoid crash due to out-of-scope stack ptr access" added to usb-testing |
- - - |
2019-02-15 |
Greg Kroah-Hartman |
|
New |
| [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+ |
- - - |
2019-02-15 |
Stanislaw Gruszka |
|
New |
| [-next] usb: host: oxu210hp-hcd: remove set but not used variables 'uframes, transfer_buffer_length' |
- - - |
2019-02-15 |
YueHaibing |
|
New |
| USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485 |
- - - |
2019-02-14 |
Måns Rullgård |
|
New |
| [v4,6/6] usb:cdns3 Fix for stuck packets in on-chip OUT buffer. |
- - - |
2019-02-14 |
Pawel Laszczak |
|
New |
| [v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver |
- - - |
2019-02-14 |
Pawel Laszczak |
|
New |
| [v4,4/6] usb:common Simplify usb_decode_get_set_descriptor function. |
- - - |
2019-02-14 |
Pawel Laszczak |
|
New |
| [v4,3/6] usb:common Patch simplify usb_decode_set_clear_feature function. |
- - - |
2019-02-14 |
Pawel Laszczak |
|
New |
| [v4,2/6] usb:common Separated decoding functions from dwc3 driver. |
- - - |
2019-02-14 |
Pawel Laszczak |
|
New |
| [v4,1/6] dt-bindings: add binding for USBSS-DRD controller. |
- - - |
2019-02-14 |
Pawel Laszczak |
|
New |
| [RFC,0/2] Fix for the internal card reader and suspend on MacBooks |
- - - |
2019-02-14 |
Mathias Nyman |
|
New |
| [regression] USB power management failure to suspend / high CPU usage |
- - - |
2019-02-14 |
Mathias Nyman |
|
New |
| usb: dwc2: hcd: call dwc2_is_controller_alive under spinlock |
- - - |
2019-02-14 |
Jaehoon Chung |
|
New |
| [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+ |
- - - |
2019-02-14 |
Stanislaw Gruszka |
|
New |
| [RFC,2/2] usb: quirks: Add quirk to fix card reader and suspend on MacBooks |
- - - |
2019-02-13 |
Ivan Mironov |
|
New |
| [RFC,1/2] usb: core: Add support of disabling SS link before system suspend |
- - - |
2019-02-13 |
Ivan Mironov |
|
New |
| usb: typec: tps6598x: Check mode of operation |
- - - |
2019-02-13 |
Heikki Krogerus |
|
New |
| USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN) |
- - - |
2019-02-13 |
Charles Yeh |
|
New |
| [v3,9/9] device connection: Find device connections also from device graphs |
1 2 1 |
2019-02-13 |
Heikki Krogerus |
|
New |
| [v3,8/9] device connection: Prepare support for firmware described connections |
1 2 1 |
2019-02-13 |
Heikki Krogerus |
|
New |
| [v3,7/9] usb: typec: Find the ports by also matching against the device node |
1 2 - |
2019-02-13 |
Heikki Krogerus |
|
New |
| [v3,6/9] usb: roles: Find the muxes by also matching against the device node |
1 2 1 |
2019-02-13 |
Heikki Krogerus |
|
New |
| [v3,5/9] usb: typec: mux: Find the muxes by also matching against the device node |
1 2 - |
2019-02-13 |
Heikki Krogerus |
|
New |
| [v3,4/9] device connection: Add fwnode member to struct device_connection |
1 2 - |
2019-02-13 |
Heikki Krogerus |
|
New |
| [v3,3/9] platform/x86: intel_cht_int33fe: Remove old style mux connections |
- 3 - |
2019-02-13 |
Heikki Krogerus |
|
New |
| [v3,2/9] usb: typec: Rationalize the API for the muxes |
- 3 - |
2019-02-13 |
Heikki Krogerus |
|
New |
| [v3,1/9] platform/x86: intel_cht_int33fe: Prepare for better mux naming scheme |
- 3 - |
2019-02-13 |
Heikki Krogerus |
|
New |
| usb: dwc3: Reset num_trbs after skipping |
- - - |
2019-02-13 |
Thinh Nguyen |
|
New |
| USB: musb: mark expected switch fall-through |
- - - |
2019-02-12 |
Gustavo A. R. Silva |
|
New |
| usb: typec: tcpm: Remove unused functions |
1 - - |
2019-02-12 |
Guenter Roeck |
|
New |
| [8/8] usb: dwc3: Add Amlogic G12A DWC3 glue |
- - - |
2019-02-12 |
Neil Armstrong |
|
New |
| [7/8] usb: dwc2: Add Amlogic G12A DWC2 Params |
- - - |
2019-02-12 |
Neil Armstrong |
|
New |
| [6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver |
- - - |
2019-02-12 |
Neil Armstrong |
|
New |
| [5/8] phy: amlogic: add Amlogic G12A USB2 PHY Driver |
- - - |
2019-02-12 |
Neil Armstrong |
|
New |
| [4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings |
- - - |
2019-02-12 |
Neil Armstrong |
|
New |
| [3/8] dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible |
- - - |
2019-02-12 |
Neil Armstrong |
|
New |
| [2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings |
- - - |
2019-02-12 |
Neil Armstrong |
|
New |
| [1/8] dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings |
- - - |
2019-02-12 |
Neil Armstrong |
|
New |
| [v2] USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX) |
- - - |
2019-02-12 |
Charles Yeh |
|
New |
| [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+ |
- - - |
2019-02-12 |
Stanislaw Gruszka |
|
New |
| [1/1] usb: misc: usbtest: add super-speed isoc support |
- - - |
2019-02-12 |
Peter Chen |
|
New |
| [5/5] usb: musb: Kconfig: Drop dependency on CONFIG_USB for jz4740 |
- - - |
2019-02-11 |
Bin Liu |
|
New |
| [4/5] usb: musb: Kconfig: Drop dependency on MACH_JZ4740 for jz4740 |
- - - |
2019-02-11 |
Bin Liu |
|
New |
| [3/5] usb: musb: jz4740: Add support for devicetree |
- - - |
2019-02-11 |
Bin Liu |
|
New |
| [2/5] Documentation: dt: Add binding info for jz4740-musb driver |
- 1 - |
2019-02-11 |
Bin Liu |
|
New |
| [1/5] USB: musb: fix indentation issue on a return statement |
- - - |
2019-02-11 |
Bin Liu |
|
New |
| usb: phy: twl6030-usb: fix possible use-after-free on remove |
- - - |
2019-02-11 |
Sven Van Asbroeck |
|
New |
| [v2,8/8] usb: ohci-da8xx: remove unused callbacks from platform data |
1 - - |
2019-02-11 |
Bartosz Golaszewski |
|
New |
| [v2,7/8] ARM: davinci: da830-evm: remove legacy usb helpers |
- - - |
2019-02-11 |
Bartosz Golaszewski |
|
New |
| [v2,6/8] ARM: davinci: omapl138-hawk: remove legacy usb helpers |
- - - |
2019-02-11 |
Bartosz Golaszewski |
|
New |
| [v2,5/8] usb: ohci-da8xx: add vbus and overcurrent gpios |
1 - - |
2019-02-11 |
Bartosz Golaszewski |
|
New |
| [v2,4/8] ARM: davinci: da830-evm: use gpio lookup entries for usb gpios |
- 1 - |
2019-02-11 |
Bartosz Golaszewski |
|
New |
| [v2,3/8] ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios |
- 1 - |
2019-02-11 |
Bartosz Golaszewski |
|
New |
| [v2,2/8] usb: ohci-da8xx: add a helper pointer to &pdev->dev |
1 - - |
2019-02-11 |
Bartosz Golaszewski |
|
New |
| [v2,1/8] usb: ohci-da8xx: add a new line after local variables |
1 - - |
2019-02-11 |
Bartosz Golaszewski |
|
New |
| [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+ |
- - - |
2019-02-10 |
Lorenzo Bianconi |
|
New |
| [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+ |
- - - |
2019-02-10 |
Stanislaw Gruszka |
|
New |
| USB: serial: pl2303: add Delock Infrared device id |
- - - |
2019-02-09 |
ebrahim@gnu.org |
|
New |
| USB: serial: pl2303: add Delock Infrared device id |
- - - |
2019-02-09 |
ebrahim@gnu.org |
|
New |
| [net-next] net: usb: rtl8150: mark expected switch fall-through |
- - - |
2019-02-08 |
Gustavo A. R. Silva |
|
New |
| [net-next] net: usb: pegasus: Mark expected switch fall-through |
- - - |
2019-02-08 |
Gustavo A. R. Silva |
|
New |
| usb: host: oxu210hp-hcd: fix indentation issue |
- - - |
2019-02-08 |
Colin King |
|
New |
| [net-next] net: usb: cdc-phonet: use struct_size() in alloc_netdev() |
- - - |
2019-02-08 |
Gustavo A. R. Silva |
|
New |
| [CFT] signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio |
- - - |
2019-02-08 |
Eric W. Biederman |
|
New |
| [v2] xhci: Drop superfluous initialization in xhci_queue_ctrl_tx() |
- - - |
2019-02-08 |
Andrey Smirnov |
|
New |
| [v2] xhci: Use __ffs() to find page size in xhci_mem_init() |
- - - |
2019-02-08 |
Andrey Smirnov |
|
New |
| [v2] xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic() |
- - - |
2019-02-08 |
Andrey Smirnov |
|
New |
| [v5,2/2] usb: typec: ucsi: add firmware flashing support |
- - - |
2019-02-07 |
Ajay Gupta |
|
New |
| [v5,1/2] usb: typec: ucsi: add get_fw_info function |
- - - |
2019-02-07 |
Ajay Gupta |
|
New |
| [v4,4/4] phy: qualcomm: usb: Add SuperSpeed PHY driver |
- - - |
2019-02-07 |
Jorge Ramirez |
|
New |
| [v4,3/4] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings |
- - - |
2019-02-07 |
Jorge Ramirez |
|
New |
| [v4,2/4] dt-bindings: connector: Add vbus-supply property |
- 1 - |
2019-02-07 |
Jorge Ramirez |
|
New |
| [v4,1/4] dt-bindings: phy: remove qcom-dwc3-usb-phy |
- 1 - |
2019-02-07 |
Jorge Ramirez |
|
New |
| xhci: Use ffs() to find page size in xhci_mem_init() |
- - - |
2019-02-07 |
Andrey Smirnov |
|
New |
| xhci: Drop superfluous initialization in xhci_queue_ctrl_tx() |
- - - |
2019-02-07 |
Andrey Smirnov |
|
New |
| xhci: Convert xhci_handshake() to use readl_poll_timeout() |
- - - |
2019-02-07 |
Andrey Smirnov |
|
New |
| [v4,2/2] usb: typec: ucsi: add firmware flashing support |
- - - |
2019-02-06 |
Ajay Gupta |
|
New |
| [v4,1/2] usb: typec: ucsi: add get_fw_info function |
- - - |
2019-02-06 |
Ajay Gupta |
|
New |
| [RFC,net-next] net: fixed_phy: Move the DT based link GPIO parsing to of_mdio.c |
- - - |
2019-02-06 |
mdf@kernel.org |
|
New |
| usb: dwc3: haps: Workaround matching VID PID |
- - - |
2019-02-06 |
Thinh Nguyen |
|
New |
| [RESEND] dt-bindings: arm: atmel: add new sam9x60 SFR binding |
- - - |
2019-02-06 |
Nicolas Ferre |
|
New |
| USB: serial: cp210x: Add ID for Ingenico 3070 |
- - - |
2019-02-06 |
Ivan Mironov |
|
New |
| [v2] USB: serial: cp210x: add minimun baud rate for CP2105 SCI |
- - - |
2019-02-06 |
Johanna Abrahamsson |
|
New |
| [RFC,v2] usb: xhci: add Immediate Data Transfer support |
- - - |
2019-02-05 |
Nicolas Saenz Julienne |
|
New |
| USB: gadget: Improve kerneldoc for usb_ep_dequeue() |
- - - |
2019-02-05 |
Alan Stern |
|
New |
| [RFC] usb: f_fs: Avoid crash due to out-of-scope stack ptr access |
- - - |
2019-02-05 |
John Stultz |
|
New |
| [2/2] usb: dwc3: debug: purge usage of strcat |
- - - |
2019-02-05 |
Felipe Balbi |
|
New |
| [1/2] usb: dwc3: trace: pass trace buffer size to decoding functions |
- - - |
2019-02-05 |
Felipe Balbi |
|
New |
| [8/8] usb: ohci-da8xx: remove unused callbacks from platform data |
- - - |
2019-02-05 |
Bartosz Golaszewski |
|
New |
| [7/8] ARM: davinci: da830-evm: remove legacy usb helpers |
- - - |
2019-02-05 |
Bartosz Golaszewski |
|
New |
| [6/8] ARM: davinci: omapl138-hawk: remove legacy usb helpers |
- - - |
2019-02-05 |
Bartosz Golaszewski |
|
New |
| [5/8] usb: ohci-da8xx: add vbus and overcurrent gpios |
- - - |
2019-02-05 |
Bartosz Golaszewski |
|
New |
