[RFC,v4,10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block |
- - - |
2019-01-31 |
Matti Vaittinen |
|
New |
[RFC,v4,09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block |
- - - |
2019-01-31 |
Matti Vaittinen |
|
New |
[RFC,v4,08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC |
1 - - |
2019-01-31 |
Matti Vaittinen |
|
New |
[RFC,v4,07/10] gpio: Initial support for ROHM bd70528 GPIO block |
- 1 - |
2019-01-31 |
Matti Vaittinen |
|
New |
[RFC,v4,06/10] devicetree: bindings: Document first ROHM BD70528 bindings |
1 1 - |
2019-01-31 |
Matti Vaittinen |
|
New |
[RFC,v4,05/10] clk: bd718x7: Support ROHM BD70528 clk block |
- - - |
2019-01-31 |
Matti Vaittinen |
|
New |
[RFC,v4,04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core |
- - - |
2019-01-31 |
Matti Vaittinen |
|
New |
[RFC,v4,03/10] clk: bd718x7: use chip specific and generic data structs |
- - - |
2019-01-31 |
Matti Vaittinen |
|
New |
[RFC,v4,02/10] regulator: bd718x7 use chip specific and generic data structs |
1 - - |
2019-01-31 |
Matti Vaittinen |
|
New |
[RFC,v4,01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts |
- - - |
2019-01-31 |
Matti Vaittinen |
|
New |
[v3,8/8] ARM: exynos_defconfig: enable DMC driver |
- - - |
2019-01-31 |
Lukasz Luba |
|
New |
[v3,7/8] drivers: devfreq: events: add Exynos PPMU new events |
- - - |
2019-01-31 |
Lukasz Luba |
|
New |
[v3,6/8] DT: arm: exynos: add DMC device for exynos5422 |
- - - |
2019-01-31 |
Lukasz Luba |
|
New |
[v3,5/8] dt-bindings: devfreq: add Exynos5422 DMC device description |
- - - |
2019-01-31 |
Lukasz Luba |
|
New |
[v3,4/8] drivers: devfreq: add DMC driver for Exynos5422 |
- - - |
2019-01-31 |
Lukasz Luba |
|
New |
[v3,3/8] clk: samsung: add BPLL rate table for Exynos 5422 SoC |
- - - |
2019-01-31 |
Lukasz Luba |
|
New |
[v3,2/8] clk: samsung: add new clocks for DMC for Exynos5422 SoC |
- - - |
2019-01-31 |
Lukasz Luba |
|
New |
[v3,1/8] clk: samsung: add needed IDs for DMC clocks in Exynos5420 |
- - - |
2019-01-31 |
Lukasz Luba |
|
New |
PM / OPP: Remove unused parameter of _generic_set_opp_clk_only() |
- 1 - |
2019-01-31 |
Viresh Kumar |
|
New |
cpuidle: dt: bail out if the idle-state DT node is not compatible |
- - - |
2019-01-31 |
Joseph Lo |
|
New |
cpufreq: Record stats when fast switching is enabled |
- - - |
2019-01-31 |
Matthias Kaehlcke |
|
New |
cpufreq: intel_pstate: Rework iowait boosting to be less aggressive |
- - - |
2019-01-31 |
Rafael J. Wysocki |
|
New |
PM/runtime: Optimize pm_runtime_autosuspend_expiration() |
2 - - |
2019-01-30 |
Ladislav Michl |
|
New |
[v3] PM-runtime: fix deadlock with ktime |
- - - |
2019-01-30 |
Vincent Guittot |
|
New |
[v2,5/5] cpufreq: scmi: Register an Energy Model |
- - - |
2019-01-30 |
Quentin Perret |
|
New |
[v2,4/5] cpufreq: arm_big_little: Register an Energy Model |
- - - |
2019-01-30 |
Quentin Perret |
|
New |
[v2,3/5] cpufreq: scpi: Register an Energy Model |
- - - |
2019-01-30 |
Quentin Perret |
|
New |
[v2,2/5] cpufreq: dt: Register an Energy Model |
- - - |
2019-01-30 |
Quentin Perret |
|
New |
[v2,1/5] PM / OPP: Introduce a power estimation helper |
- - 1 |
2019-01-30 |
Quentin Perret |
|
New |
cpuidle: poll_state: Fix default time limit. |
- - - |
2019-01-30 |
Doug Smythies |
|
New |
[v7,25/28] x86_32/asm: add ENDs to some functions and relabel with SYM_CODE_* |
- 2 - |
2019-01-30 |
Jiri Slaby |
|
New |
[v7,03/28] x86/asm/suspend: use SYM_DATA for data |
2 - - |
2019-01-30 |
Jiri Slaby |
|
New |
[v7,02/28] x86/asm/suspend: drop ENTRY from local data |
2 - - |
2019-01-30 |
Jiri Slaby |
|
New |
[v7,01/28] linkage: new macros for assembler symbols |
- - - |
2019-01-30 |
Jiri Slaby |
|
New |
[v2] PM-runtime: fix deadlock with ktime |
- 1 - |
2019-01-30 |
Vincent Guittot |
|
New |
[RFC,v3,10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block |
- - - |
2019-01-30 |
Matti Vaittinen |
|
New |
[RFC,v3,09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block |
- - - |
2019-01-30 |
Matti Vaittinen |
|
New |
[RFC,v3,08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC |
1 - - |
2019-01-30 |
Matti Vaittinen |
|
New |
[RFC,v3,07/10] gpio: Initial support for ROHM bd70528 GPIO block |
- 1 - |
2019-01-30 |
Matti Vaittinen |
|
New |
[RFC,v3,06/10] devicetree: bindings: Document first ROHM BD70528 bindings |
- - - |
2019-01-30 |
Matti Vaittinen |
|
New |
[RFC,v3,05/10] clk: bd718x7: Support ROHM BD70528 clk block |
- - - |
2019-01-30 |
Matti Vaittinen |
|
New |
[RFC,v3,04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core |
- - - |
2019-01-30 |
Matti Vaittinen |
|
New |
[RFC,v3,03/10] clk: bd718x7: use chip specific and generic data structs |
- - - |
2019-01-30 |
Matti Vaittinen |
|
New |
[RFC,v3,02/10] regulator: bd718x7 use chip specific and generic data structs |
1 - - |
2019-01-30 |
Matti Vaittinen |
|
New |
[RFC,v3,01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts |
- - - |
2019-01-30 |
Matti Vaittinen |
|
New |
PM-runtime: fix deadlock with ktime |
- - - |
2019-01-30 |
Vincent Guittot |
|
New |
cpufreq: Auto-register the driver as a thermal cooling device if asked |
1 2 1 |
2019-01-30 |
Amit Kucheria |
|
New |
[v5,2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked |
- - - |
2019-01-29 |
Amit Kucheria |
|
New |
[v2,8/8] ARM: exynos_defconfig: enable DMC driver |
- - - |
2019-01-29 |
Lukasz Luba |
|
New |
[v2,7/8] drivers: devfreq: events: add Exynos PPMU new events |
- - - |
2019-01-29 |
Lukasz Luba |
|
New |
[v2,6/8] DT: arm: exynos: add DMC device for exynos5422 |
- - - |
2019-01-29 |
Lukasz Luba |
|
New |
[v2,5/8] dt-bindings: devfreq: add Exynos5422 DMC device description |
- - - |
2019-01-29 |
Lukasz Luba |
|
New |
[v2,4/8] drivers: devfreq: add DMC driver for Exynos5422 |
- - - |
2019-01-29 |
Lukasz Luba |
|
New |
[v2,3/8] clk: samsung: add BPLL rate table for Exynos 5422 SoC |
- - - |
2019-01-29 |
Lukasz Luba |
|
New |
[v2,2/8] clk: samsung: add new clocks for DMC for Exynos5422 SoC |
- - - |
2019-01-29 |
Lukasz Luba |
|
New |
[v2,1/8] clk: samsung: add needed IDs for DMC clocks in Exynos5420 |
- - - |
2019-01-29 |
Lukasz Luba |
|
New |
[v2,13/13] MAINTAINERS: add an entry for max77650 mfd driver |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,12/13] input: max77650: add onkey support |
1 - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,11/13] leds: max77650: add LEDs support |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,10/13] gpio: max77650: add GPIO support |
- 1 - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,09/13] power: supply: max77650: add support for battery charger |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,08/13] regulator: max77650: add regulator support |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,07/13] mfd: max77650: new core mfd driver |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,06/13] dt-bindings: input: add DT bindings for max77650 |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,05/13] dt-bindings: leds: add DT bindings for max77650 |
1 - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,04/13] dt-bindings: gpio: add DT bindings for max77650 |
- 1 - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,03/13] dt-bindings: power: supply: add DT bindings for max77650 |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,02/13] dt-bindings: regulator: add DT bindings for max77650 |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
gpio fixup domain |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[v2,01/13] dt-bindings: mfd: add DT bindings for max77650 |
- - - |
2019-01-29 |
Bartosz Golaszewski |
|
New |
[resend] thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs |
- - - |
2019-01-29 |
Phil Elwell |
|
New |
thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs |
- 1 - |
2019-01-29 |
Phil Elwell |
|
New |
[v5,9/9] cpufreq: scpi: Use auto-registration of thermal cooling device |
2 1 - |
2019-01-29 |
Amit Kucheria |
|
New |
[v5,8/9] cpufreq: scmi: Use auto-registration of thermal cooling device |
2 1 - |
2019-01-29 |
Amit Kucheria |
|
New |
[v5,7/9] cpufreq: qoriq: Use auto-registration of thermal cooling device |
1 1 - |
2019-01-29 |
Amit Kucheria |
|
New |
[v5,6/9] cpufreq: mediatek: Use auto-registration of thermal cooling device |
1 2 - |
2019-01-29 |
Amit Kucheria |
|
New |
[v5,5/9] cpufreq: cpufreq-dt: Use auto-registration of thermal cooling device |
1 1 - |
2019-01-29 |
Amit Kucheria |
|
New |
[v5,4/9] cpufreq: imx6q: Use auto-registration of thermal cooling device |
1 1 - |
2019-01-29 |
Amit Kucheria |
|
New |
[v5,3/9] cpufreq: qcom-hw: Register as a cpufreq cooling device |
1 3 1 |
2019-01-29 |
Amit Kucheria |
|
New |
[v5,2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked |
1 1 1 |
2019-01-29 |
Amit Kucheria |
|
New |
[v5,1/9] thermal: cpu_cooling: Require thermal core to be compiled in |
1 - - |
2019-01-29 |
Amit Kucheria |
|
New |
[RFC/PATCH,5/5] arm64: dts: sdm845: Add OPP table for all qup devices |
- - - |
2019-01-29 |
Stephen Boyd |
|
New |
[RFC/PATCH,4/5] spi: spi-geni-qcom: Use OPP API to set clk/perf state |
- - - |
2019-01-29 |
Stephen Boyd |
|
New |
[RFC/PATCH,3/5] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state |
- - - |
2019-01-29 |
Stephen Boyd |
|
New |
[RFC/PATCH,2/5] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid |
- - - |
2019-01-29 |
Stephen Boyd |
|
New |
[RFC/PATCH,1/5] OPP: Don't overwrite rounded clk rate |
- - - |
2019-01-29 |
Stephen Boyd |
|
New |
[4/4] driver core: Do not call rpm_put_suppliers() in pm_runtime_drop_link() |
- - - |
2019-01-28 |
Rafael J. Wysocki |
|
New |
[3/4] driver core: Add device link flag DL_FLAG_AUTOPROBE_CONSUMER |
- - - |
2019-01-28 |
Rafael J. Wysocki |
|
New |
[2/4] driver core: Make driver core own stateful device links |
- - - |
2019-01-28 |
Rafael J. Wysocki |
|
New |
[1/4] IOMMU: Make dwo drivers use stateless device links |
2 - - |
2019-01-28 |
Rafael J. Wysocki |
|
New |
[7/8] drivers: devfreq: events: add Exynos PPMU new events |
- - - |
2019-01-28 |
Lukasz Luba |
|
New |
[5/8] drivers: devfreq: exynos5: add DMC driver |
- - - |
2019-01-28 |
Lukasz Luba |
|
New |
[4/8] dt-bindings: devfreq: add DMC device description |
- - - |
2019-01-28 |
Lukasz Luba |
|
New |
[7/7] arm: dts: vexpress-v2p-ca15_a7: Add cpu dynamic-power-coefficient information |
- - - |
2019-01-28 |
Quentin Perret |
|
New |
[6/7] arm64: dts: juno: Add cpu dynamic-power-coefficient information |
- - - |
2019-01-28 |
Quentin Perret |
|
New |
[5/7] cpufreq: scmi: Register an Energy Model |
- - - |
2019-01-28 |
Quentin Perret |
|
New |
[4/7] cpufreq: arm_big_little: Register an Energy Model |
- - - |
2019-01-28 |
Quentin Perret |
|
New |
[3/7] cpufreq: scpi: Register an Energy Model |
- - - |
2019-01-28 |
Quentin Perret |
|
New |
[2/7] cpufreq: dt: Register an Energy Model |
- - - |
2019-01-28 |
Quentin Perret |
|
New |
[1/7] PM / OPP: Introduce a power estimation helper |
- 1 1 |
2019-01-28 |
Quentin Perret |
|
New |