[5/5] PCI: dwc: Remove superfluous shifting in definitions |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[4/5] PCI: dwc: Make use of GENMASK/FIELD_PREP |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[3/5] PCI: dwc: Make use of BIT() in constant definitions |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[2/5] PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[1/5] PCI: dwc: Make use of IS_ALIGNED() |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[2/2] PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ |
- 1 - |
2019-02-12 |
Andrey Smirnov |
|
New |
[1/2] dt-bindings: imx6q-pcie: Add "pcie_aux" clock for imx8mq |
- 1 - |
2019-02-12 |
Andrey Smirnov |
|
New |
[v7,4/4] PCI: imx6: Add support for i.MX8MQ |
- 1 - |
2019-02-02 |
Andrey Smirnov |
|
New |
[v7,3/4] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag |
- 1 - |
2019-02-02 |
Andrey Smirnov |
|
New |
[v7,2/4] PCI: imx6: Mark PHY functions as i.MX6 specific |
- 1 1 |
2019-02-02 |
Andrey Smirnov |
|
New |
[v7,1/4] PCI: imx6: Introduce drvdata |
- 1 - |
2019-02-02 |
Andrey Smirnov |
|
New |
[v6,4/4] PCI: imx6: Add support for i.MX8MQ |
- 1 - |
2019-01-24 |
Andrey Smirnov |
|
New |
[v6,3/4] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag |
- 1 - |
2019-01-24 |
Andrey Smirnov |
|
New |
[v6,2/4] PCI: imx6: Mark PHY functions as i.MX6 specific |
- 1 1 |
2019-01-24 |
Andrey Smirnov |
|
New |
[v6,1/4] PCI: imx6: Introduce drvdata |
- 1 - |
2019-01-24 |
Andrey Smirnov |
|
New |
[v5,4/4] PCI: imx6: Add support for i.MX8MQ |
- 1 - |
2019-01-12 |
Andrey Smirnov |
|
New |
[v5,3/4] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag |
- 1 - |
2019-01-12 |
Andrey Smirnov |
|
New |
[v5,2/4] PCI: imx6: Mark PHY functions as i.MX6 specific |
- 1 1 |
2019-01-12 |
Andrey Smirnov |
|
New |
[v5,1/4] PCI: imx6: introduce drvdata |
- 1 - |
2019-01-12 |
Andrey Smirnov |
|
New |
[v2,20/20] PCI: dwc: Remove superfluous shifting in definitions |
1 - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,19/20] PCI: dwc: Make use of GENMASK/FIELD_PREP |
1 - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,18/20] PCI: imx6: Remove magic numbers from imx6_pcie_establish_link() |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,17/20] PCI: imx6: Simplify bit operations in imx6_setup_phy_mpll() |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,16/20] PCI: imx6: Use common mask in imx6_pcie_reset_phy() |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,15/20] PCI: imx6: Pass data to dw_pcie_writel_dbi() directly |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,14/20] PCI: imx6: Restrict PHY register data to 16-bit |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,13/20] PCI: imx6: Simplify pcie_phy_poll_ack() |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,12/20] PCI: imx6: Simplify bit operations in PHY functions |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,11/20] PCI: imx6: Make use of BIT() in constant definitions |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,10/20] PCI: dwc: Make use of BIT() in constant definitions |
1 - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,09/20] PCI: dwc: imx6: Share PHY debug register definitions |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,08/20] PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() |
1 - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,07/20] PCI: dwc: Make use of IS_ALIGNED() |
1 - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,06/20] PCI: imx6: Remove PCIE_PHY_RX_ASIC_OUT* constants |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,05/20] PCI: imx6: Remove PCIE_PL_PFLR_* constants |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,04/20] PCI: imx6: Remove duplicate macro definitions |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,03/20] PCI: imx6: Return -ETIMEOUT from imx6_pcie_wait_for_speed_change() |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,02/20] PCI: imx6: Remove redundant debug tracing |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v2,01/20] PCI: imx6: Simplify imx7d_pcie_wait_for_phy_pll_lock() |
- - - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v4,4/4] PCI: imx6: Add support for i.MX8MQ |
- 1 - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v4,3/4] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag |
- 1 - |
2019-01-04 |
Andrey Smirnov |
|
New |
[v4,2/4] PCI: imx6: Mark PHY functions as i.MX6 specific |
- 1 1 |
2019-01-04 |
Andrey Smirnov |
|
New |
[v4,1/4] PCI: imx6: introduce drvdata |
- 1 - |
2019-01-04 |
Andrey Smirnov |
|
New |
[21/21] PCI: designware: Remove superfluous shifting in definitions |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[20/21] PCI: designware: Make use of GENMASK/FIELD_PREP |
1 - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[19/21] PCI: imx6: Remove magic numbers from imx6_pcie_establish_link() |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[18/21] PCI: imx6: Simplify bit operations in imx6_setup_phy_mpll() |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[17/21] PCI: imx6: Use common mask in imx6_pcie_reset_phy() |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[16/21] PCI: imx6: Pass data to dw_pcie_writel_dbi() directly |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[15/21] PCI: imx6: Restrict PHY register data to 16-bit |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[14/21] PCI: imx6: Simplify pcie_phy_poll_ack() |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[13/21] PCI: imx6: Simplify bit operations in PHY functions |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[12/21] PCI: imx6: Make use of BIT() in constant definitions |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[11/21] PCI: designware: Make use of BIT() in constant definitions |
1 - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[10/21] PCI: designware: imx6: Share PHY debug register definitions |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[09/21] PCI: imx6: Drop imx6_pcie_link_up() |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[08/21] PCI: designware: Share code for dw_pcie_rd/wr_other_conf() |
1 - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[07/21] PCI: designware: Make use of IS_ALIGNED() |
1 - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[06/21] PCI: imx6: Remove PCIE_PHY_RX_ASIC_OUT* constants |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[05/21] PCI: imx6: Remove PCIE_PL_PFLR_* constants |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[04/21] PCI: imx6: Remove duplicate macro definitions |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[03/21] PCI: imx6: Return -ETIMEOUT from imx6_pcie_wait_for_speed_change() |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[02/21] PCI: imx6: Remove redundant debug tracing |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[01/21] PCI: imx6: Simplify imx7d_pcie_wait_for_phy_pll_lock() |
- - - |
2018-12-21 |
Andrey Smirnov |
|
New |
[v3,3/3] PCI: imx6: Add support for i.MX8MQ |
- 1 - |
2018-12-18 |
Andrey Smirnov |
|
New |
[v3,2/3] PCI: imx6: Mark PHY functions as i.MX6 specific |
- 1 1 |
2018-12-18 |
Andrey Smirnov |
|
New |
[v3,1/3] PCI: imx6: introduce drvdata |
- 1 - |
2018-12-18 |
Andrey Smirnov |
|
New |
[3/3] PCI: imx6: Make fallthrough comments more consistent |
- - - |
2018-12-16 |
Andrey Smirnov |
|
New |
[2/3] PCI: imx6: Invert checks in imx6_pcie_reset_phy() and imx6_setup_phy_mpll() |
- - - |
2018-12-16 |
Andrey Smirnov |
|
New |
[1/3] PCI: imx6: Fixup Kconfig and #endif placement |
- - - |
2018-12-16 |
Andrey Smirnov |
|
New |
PCI: controller: dwc: Make PCI_IMX6 depend on PCIEPORTBUS |
- - - |
2018-12-06 |
Andrey Smirnov |
|
New |
[v2,3/3] PCI: imx: Add support for i.MX8MQ |
- 1 - |
2018-12-06 |
Andrey Smirnov |
|
New |
[v2,2/3] PCI: imx: No-op imx6_pcie_reset_phy() on i.MX7D |
- 1 1 |
2018-12-06 |
Andrey Smirnov |
|
New |
[v2,1/3] PCI: imx: No-op imx6_setup_phy_mpll() on i.MX7D |
- 1 1 |
2018-12-06 |
Andrey Smirnov |
|
New |
[3/3] PCI: imx: Add support for i.MX8MQ |
- - - |
2018-11-17 |
Andrey Smirnov |
|
New |
[2/3] PCI: imx: No-op imx6_pcie_reset_phy() on i.MX7D |
- - - |
2018-11-17 |
Andrey Smirnov |
|
New |
[1/3] PCI: imx: No-op imx6_setup_phy_mpll() on i.MX7D |
- - - |
2018-11-17 |
Andrey Smirnov |
|
New |
[v8,4/4] PCI: imx6: Do not switch speed if Gen2 is disabled |
- 1 - |
2017-03-28 |
Andrey Smirnov |
|
New |
[v8,3/4] PCI: imx6: Do not wait for speed change on i.MX7 |
- 1 - |
2017-03-28 |
Andrey Smirnov |
|
New |
[v8,2/4] PCI: imx6: Allow probe deferal by reset GPIO |
- 1 - |
2017-03-28 |
Andrey Smirnov |
|
New |
[v8,1/4] PCI: imx6: Add code to support i.MX7D |
2 1 - |
2017-03-28 |
Andrey Smirnov |
|
New |
[v7,4/4] PCI: imx6: Do not switch speed if Gen2 is disabled |
- 1 - |
2017-03-21 |
Andrey Smirnov |
|
New |
[v7,3/4] PCI: imx6: Do not wait for speed change on i.MX7 |
- 1 - |
2017-03-21 |
Andrey Smirnov |
|
New |
[v7,2/4] PCI: imx6: Allow probe deferal by reset GPIO |
- 1 - |
2017-03-21 |
Andrey Smirnov |
|
New |
[v7,1/4] PCI: imx6: Add code to support i.MX7D |
2 1 - |
2017-03-21 |
Andrey Smirnov |
|
New |
[v6,4/4] PCI: imx6: Allow probe deferal by reset GPIO |
- - - |
2017-03-14 |
Andrey Smirnov |
|
New |
[v6,3/4] PCI: imx6: Do not switch speed if Gen2 is disabled |
- - - |
2017-03-14 |
Andrey Smirnov |
|
New |
[v6,2/4] PCI: imx6: Do not wait for speed change on i.MX7 |
- - - |
2017-03-14 |
Andrey Smirnov |
|
New |
[v6,1/4] PCI: imx6: Add code to support i.MX7D |
2 1 - |
2017-03-14 |
Andrey Smirnov |
|
New |
[RESEND,v5,4/4] PCI: imx6: Allow probe deferal by reset GPIO |
- - - |
2017-02-20 |
Andrey Smirnov |
|
New |
[RESEND,v5,3/4] PCI: imx6: Do not switch speed if Gen2 is disabled |
- - - |
2017-02-20 |
Andrey Smirnov |
|
New |
[RESEND,v5,2/4] PCI: imx6: Do not wait for speed change on i.MX7 |
- - - |
2017-02-20 |
Andrey Smirnov |
|
New |
[RESEND,v5,1/4] PCI: imx6: Add code to support i.MX7D |
1 1 - |
2017-02-20 |
Andrey Smirnov |
|
New |
[v5,4/4] PCI: imx6: Allow probe deferal by reset GPIO |
- 1 - |
2017-02-20 |
Andrey Smirnov |
|
New |
[v5,3/4] PCI: imx6: Do not switch speed if Gen2 is disabled |
- - - |
2017-02-20 |
Andrey Smirnov |
|
New |
[v5,2/4] PCI: imx6: Do not wait for speed change on i.MX7 |
- - - |
2017-02-20 |
Andrey Smirnov |
|
New |
[v5,1/4] PCI: imx6: Add code to support i.MX7D |
1 - - |
2017-02-20 |
Andrey Smirnov |
|
New |
[v4,3/3] PCI: imx6: Add code to support i.MX7D |
1 1 - |
2017-02-07 |
Andrey Smirnov |
|
New |
[v4,2/3] PCI: imx6: Allow probe deferal by reset GPIO |
- 1 - |
2017-02-07 |
Andrey Smirnov |
|
New |
[v4,1/3] PCI: imx6: Fix a typo in error message |
1 - - |
2017-02-07 |
Andrey Smirnov |
|
New |