[v3] PCI/MSI: Don't touch MSI bits when the PCI device is disconnected |
- - - |
2019-02-22 |
Alexandru Gagniuc |
|
New |
lspci: Decode all defined fields in the Device Capabilities 2 register |
- - - |
2019-02-22 |
Frederick Lawler |
|
New |
[v4,9/9] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it |
- - - |
2019-02-21 |
Kishon Vijay Abraham I |
|
New |
[v4,8/9] PCI: dwc: Remove Keystone specific dw_pcie_host_ops |
- - - |
2019-02-21 |
Kishon Vijay Abraham I |
|
New |
[v4,7/9] PCI: keystone: Use Keystone specific msi_irq_chip |
- - - |
2019-02-21 |
Kishon Vijay Abraham I |
|
New |
[v4,6/9] PCI: dwc: Add support to use non default msi_irq_chip |
- - - |
2019-02-21 |
Kishon Vijay Abraham I |
|
New |
[v4,5/9] PCI: keystone: Cleanup ks_pcie_msi_irq_handler |
- - - |
2019-02-21 |
Kishon Vijay Abraham I |
|
New |
[v4,4/9] PCI: keystone: Use hwirq to get the MSI IRQ number offset |
- - - |
2019-02-21 |
Kishon Vijay Abraham I |
|
New |
[v4,3/9] PCI: keystone: Convert to using hierarchy domain for legacy interrupts |
- - - |
2019-02-21 |
Kishon Vijay Abraham I |
|
New |
[v4,2/9] PCI: keystone: Add separate functions for configuring MSI and legacy interrupt |
- - - |
2019-02-21 |
Kishon Vijay Abraham I |
|
New |
[v4,1/9] PCI: keystone: Cleanup interrupt related macros |
- - - |
2019-02-21 |
Kishon Vijay Abraham I |
|
New |
[PATCHv7,4/4] misc: pci_endpoint_test: Add the layerscape EP device support |
- 3 - |
2019-02-21 |
Bao Xiaowei |
|
New |
[PATCHv7,3/4] pci: layerscape: Add the EP mode support. |
- 3 - |
2019-02-21 |
Bao Xiaowei |
|
New |
[PATCHv7,2/4] arm64: dts: Add the PCIE EP node in dts |
- 3 - |
2019-02-21 |
Bao Xiaowei |
|
New |
[PATCHv7,1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode |
- 3 - |
2019-02-21 |
Bao Xiaowei |
|
New |
[v3,2/2] PCI: iproc: Add outbound configuration for 32-bit I/O region |
- 2 - |
2019-02-20 |
Srinath Mannam |
|
New |
[v3,1/2] PCI: iproc: Add CRS check in config read |
- 1 - |
2019-02-20 |
Srinath Mannam |
|
New |
[6/7] MIPS: SGI-IP27: use generic PCI driver |
- - - |
2019-02-20 |
Thomas Bogendoerfer |
|
New |
[2/2] PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flags |
- - 1 |
2019-02-20 |
Thomas Petazzoni |
|
New |
[1/2] PCI: pci-bridge-emul: Create per-bridge copy of register behavior |
- - 1 |
2019-02-20 |
Thomas Petazzoni |
|
New |
[RFC,v2,4/4] PCI: hotplug: Add quirk For Dell nvme pcie switches |
- - - |
2019-02-20 |
Alexandru Gagniuc |
|
New |
[RFC,v2,3/4] PCI: hotplug: Wait for PDS when in-band presence is disabled |
- - - |
2019-02-20 |
Alexandru Gagniuc |
|
New |
[RFC,v2,2/4] PCI: pciehp: Do not turn off slot if presence comes up after link |
- - - |
2019-02-20 |
Alexandru Gagniuc |
|
New |
[RFC,v2,1/4] PCI: hotplug: Add support for disabling in-band presence |
- - - |
2019-02-20 |
Alexandru Gagniuc |
|
New |
[5/5] PCI: dwc: Remove superfluous shifting in definitions |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[4/5] PCI: dwc: Make use of GENMASK/FIELD_PREP |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[3/5] PCI: dwc: Make use of BIT() in constant definitions |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[2/5] PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[1/5] PCI: dwc: Make use of IS_ALIGNED() |
1 - - |
2019-02-19 |
Andrey Smirnov |
|
New |
[v3,2/2] iommu/vt-d: Enable ATS only if the device uses page aligned address. |
- - - |
2019-02-19 |
sathyanarayanan.kuppuswamy@linux.intel.com |
|
New |
[v3,1/2] PCI/ATS: Add pci_ats_page_aligned() interface |
1 - - |
2019-02-19 |
sathyanarayanan.kuppuswamy@linux.intel.com |
|
New |
[v3,2/2] iommu/vt-d: Fix PRI/PASID dependency issue. |
- - - |
2019-02-19 |
sathyanarayanan.kuppuswamy@linux.intel.com |
|
New |
[v3,1/2] PCI/ATS: Add pci_prg_resp_pasid_required() interface. |
1 - - |
2019-02-19 |
sathyanarayanan.kuppuswamy@linux.intel.com |
|
New |
[v2] MAINTAINERS: Update PCI Cadence maintainer entry |
- - - |
2019-02-19 |
Lorenzo Pieralisi |
|
New |
WIP: PCIe on MSM8998 |
- - - |
2019-02-19 |
Marc Gonzalez |
|
New |
[v2,10/10] MIPS: SGI-IP27: abstract chipset irq from bridge |
- - - |
2019-02-19 |
Thomas Bogendoerfer |
|
New |
[v2,08/10] MIPS: SGI-IP27: use generic PCI driver |
- - - |
2019-02-19 |
Thomas Bogendoerfer |
|
New |
[v2,07/10] PCI: call add_bus method also for root bus |
- - - |
2019-02-19 |
Thomas Bogendoerfer |
|
New |
[v2] PCI: mediatek: Remove MSI inner domain |
- - - |
2019-02-19 |
Jianjun Wang |
|
New |
[v2,7/7] arm64: dts: qcom: qcs404: Add PCIe related nodes |
- 1 - |
2019-02-19 |
Bjorn Andersson |
|
New |
[v2,6/7] PCI: qcom: Add QCS404 PCIe controller support |
- 1 - |
2019-02-19 |
Bjorn Andersson |
|
New |
[v2,5/7] dt-bindings: PCI: qcom: Add QCS404 to the binding |
- 1 - |
2019-02-19 |
Bjorn Andersson |
|
New |
[v2,4/7] PCI: qcom: Use clk_bulk API for 2.4.0 controllers |
- 1 - |
2019-02-19 |
Bjorn Andersson |
|
New |
[v2,3/7] phy: qcom: Add Qualcomm PCIe2 PHY driver |
- 1 - |
2019-02-19 |
Bjorn Andersson |
|
New |
[v2,2/7] dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY |
- - - |
2019-02-19 |
Bjorn Andersson |
|
New |
[v2,1/7] clk: gcc-qcs404: Add PCIe resets |
2 1 - |
2019-02-19 |
Bjorn Andersson |
|
New |
PCIE/PME: fix possible use-after-free on remove |
- - - |
2019-02-18 |
Sven Van Asbroeck |
|
New |
[v2] PCI: Fix "try" semantics of bus and slot reset |
- 1 - |
2019-02-18 |
Alex Williamson |
|
New |
[6/7] MIPS: SGI-IP27: use generic PCI driver |
- - - |
2019-02-18 |
Thomas Bogendoerfer |
|
New |
[6/6] misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device support |
- - - |
2019-02-18 |
Bao Xiaowei |
|
New |
[5/6] arm64: dts: freescale: lx2160a: add pcie EP mode DT nodes |
- - - |
2019-02-18 |
Bao Xiaowei |
|
New |
[4/6] PCI: mobiveil: Add workaround for unsupported request error |
- - - |
2019-02-18 |
Bao Xiaowei |
|
New |
[3/6] PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs |
- - - |
2019-02-18 |
Bao Xiaowei |
|
New |
[2/6] dt-bindings: add DT binding for the layerscape PCIe GEN4 controller with EP mode |
- - - |
2019-02-18 |
Bao Xiaowei |
|
New |
[1/6] PCI: mobiveil: Add the EP mode support |
- - - |
2019-02-18 |
Bao Xiaowei |
|
New |
[V2] PCI: rcar: Add the initialization of PCIe link in resume_noirq |
1 - - |
2019-02-17 |
Marek Vasut |
|
New |
[v6,7/7] genirq/affinity: Add support for non-managed affinity sets |
- - - |
2019-02-16 |
Thomas Gleixner |
|
New |
[v6,6/7] PCI/MSI: Remove obsolete sanity checks for multiple interrupt sets |
- 1 - |
2019-02-16 |
Thomas Gleixner |
|
New |
[v6,5/7] genirq/affinity: Remove the leftovers of the original set support |
- 1 - |
2019-02-16 |
Thomas Gleixner |
|
New |
[v6,4/7] nvme-pci: Simplify interrupt allocation |
- - - |
2019-02-16 |
Thomas Gleixner |
|
New |
[v6,3/7] genirq/affinity: Add new callback for (re)calculating interrupt sets |
- - - |
2019-02-16 |
Thomas Gleixner |
|
New |
[v6,2/7] genirq/affinity: Store interrupt sets size in struct irq_affinity |
- - - |
2019-02-16 |
Thomas Gleixner |
|
New |
[v6,1/7] genirq/affinity: Code consolidation |
- 1 - |
2019-02-16 |
Thomas Gleixner |
|
New |
PCI: Fix "try" semantics of bus and slot reset |
- - - |
2019-02-15 |
Alex Williamson |
|
New |
[pci:pci/portdrv,1/1] drivers/pci/pcie/portdrv_pci.c:187:9: sparse: warning: Initializer entry defined twice |
- - - |
2019-02-15 |
Bjorn Helgaas |
|
New |
[v3,3/3] PCI: microsemi: Add host driver for Microsemi PCIe controller |
- - - |
2019-02-15 |
Daire McNamara |
|
New |
[v3,2/3] dt-bindings: PCI: microsemi: Add DT Bindings for Microsemi PCIe host controller |
- - - |
2019-02-15 |
Daire McNamara |
|
New |
[v3,1/3] PCI: Add vendor ID for Microsemi |
- - - |
2019-02-15 |
Daire McNamara |
|
New |
[V5,4/8] nvme-pci: Simplify interrupt allocation |
- - - |
2019-02-14 |
Thomas Gleixner |
|
New |
[V5,8/8] genirq/affinity: Add support for non-managed affinity sets |
- - - |
2019-02-14 |
Thomas Gleixner |
|
New |
[V5,7/8] genirq/affinity: Set is_managed in the spreading function |
- - - |
2019-02-14 |
Thomas Gleixner |
|
New |
[V5,6/8] PCI/MSI: Remove obsolete sanity checks for multiple interrupt sets |
- - - |
2019-02-14 |
Thomas Gleixner |
|
New |
[V5,5/8] genirq/affinity: Remove the leftovers of the original set support |
- - - |
2019-02-14 |
Thomas Gleixner |
|
New |
[V5,4/8] nvme-pci: Simplify interrupt allocation |
- - - |
2019-02-14 |
Thomas Gleixner |
|
New |
[V5,3/8] genirq/affinity: Add new callback for (re)calculating interrupt sets |
- - - |
2019-02-14 |
Thomas Gleixner |
|
New |
[V5,2/8] genirq/affinity: Store interrupt sets size in struct irq_affinity |
- - - |
2019-02-14 |
Thomas Gleixner |
|
New |
[V5,1/8] genirq/affinity: Code consolidation |
- - - |
2019-02-14 |
Thomas Gleixner |
|
New |
[2/2] PCI: Fix disabling of bridge BARs when assigning bus resources |
- - - |
2019-02-14 |
Logan Gunthorpe |
|
New |
[1/2] PCI: Prevent 64-bit resources from being counted in 32-bit bridge region |
- - - |
2019-02-14 |
Logan Gunthorpe |
|
New |
[v4,3/3] dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 |
- 1 - |
2019-02-14 |
Ley Foon Tan |
|
New |
[v4,2/3] PCI: altera: Enable driver on ARM64 |
- - - |
2019-02-14 |
Ley Foon Tan |
|
New |
[v4,1/3] PCI: altera: Add Stratix 10 PCIe support |
- - - |
2019-02-14 |
Ley Foon Tan |
|
New |
[V4,4/4] PCI: Document .calc_sets as required in case of multiple interrupt sets |
1 1 - |
2019-02-14 |
Ming Lei |
|
New |
[V4,3/4] nvme-pci: Simplify interrupt allocation |
- 2 - |
2019-02-14 |
Ming Lei |
|
New |
[V4,2/4] genirq/affinity: add new callback for caculating interrupt sets size |
1 1 - |
2019-02-14 |
Ming Lei |
|
New |
[V4,1/4] genirq/affinity: store interrupt sets size in 'struct irq_affinity' |
- 1 - |
2019-02-14 |
Ming Lei |
|
New |
[RFC,v2] PCI/portdrv: Support for subtractive decode bridge |
- - - |
2019-02-14 |
honghui.zhang@mediatek.com |
|
New |
[V3,1/5] genirq/affinity: don't mark 'affd' as const |
- - - |
2019-02-13 |
Keith Busch |
|
New |
[v3] PCI/ACPI: Improve _OSC control request granularity |
- - - |
2019-02-13 |
Aaron Sierra |
|
New |
[v2,12/12] NTB: Add MSI interrupt support to ntb_transport |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,11/12] NTB: Add ntb_msi_test support to ntb_test |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,10/12] NTB: Introduce NTB MSI Test Client |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,09/12] NTB: Introduce MSI library |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,08/12] NTB: Rename ntb.c to support multiple source files in the module |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,07/12] NTB: Introduce functions to calculate multi-port resource index |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,06/12] PCI/switchtec: Add module parameter to request more interrupts |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,05/12] PCI/MSI: Support allocating virtual MSI interrupts |
1 - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,04/12] iommu/vt-d: Allow interrupts from the entire bus for aliased devices |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,03/12] iommu/vt-d: Add helper to set an IRTE to verify only the bus number |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |
[v2,02/12] NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA |
- - - |
2019-02-13 |
Logan Gunthorpe |
|
New |