arm64: dts: sdm845: Add dynamic CPU power coefficients |
- 2 - |
2019-02-11 |
Matthias Kaehlcke |
|
New |
[v5,2/5] Bluetooth: hci_qca: Deassert RTS while baudrate change command |
- - - |
2019-01-19 |
Matthias Kaehlcke |
|
New |
arm64: dts: sdm845: Add CPU capacity values |
- 1 - |
2019-01-16 |
Matthias Kaehlcke |
|
New |
[v8,3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer |
- - - |
2019-01-16 |
Matthias Kaehlcke |
|
New |
[v7,4/4] Bluetooth: btqca: inject command complete event during fw download |
- - - |
2019-01-15 |
Matthias Kaehlcke |
|
New |
[v2] cpufreq: qcom: Read voltage LUT and populate OPP |
- - - |
2019-01-15 |
Matthias Kaehlcke |
|
New |
arm64: dts: sdm845: Add CPU topology |
- 1 - |
2019-01-14 |
Matthias Kaehlcke |
|
New |
[v7,4/4] Bluetooth: btqca: inject command complete event during fw download |
- - - |
2019-01-10 |
Matthias Kaehlcke |
|
New |
[v1,7/7] arm64: dts: sdm845: wireup the thermal trip points to cpufreq |
- - - |
2019-01-10 |
Matthias Kaehlcke |
|
New |
[v5,8/8] ARM: dts: qcom-apq8064: Set 'xo_board' as ref clock of the DSI PHY |
- 1 - |
2018-12-19 |
Matthias Kaehlcke |
|
New |
[v5,7/8] arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs |
- 2 - |
2018-12-19 |
Matthias Kaehlcke |
|
New |
[v5,6/8] arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY |
- 2 - |
2018-12-19 |
Matthias Kaehlcke |
|
New |
[v5,5/8] drm/msm/dsi: 10nm PHY: Get ref clock from the DT |
- 2 - |
2018-12-19 |
Matthias Kaehlcke |
|
New |
[v5,4/8] drm/msm/dsi: 14nm PHY: Get ref clock from the DT |
- 2 - |
2018-12-19 |
Matthias Kaehlcke |
|
New |
[v5,3/8] drm/msm/dsi: 28nm PHY: Get ref clock from the DT |
- 1 - |
2018-12-19 |
Matthias Kaehlcke |
|
New |
[v5,2/8] drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT |
- 1 - |
2018-12-19 |
Matthias Kaehlcke |
|
New |
[v5,1/8] dt-bindings: msm/dsi: Add ref clock for PHYs |
- 3 - |
2018-12-19 |
Matthias Kaehlcke |
|
New |
[v4,8/8] ARM: dts: qcom-apq8064: Set 'xo_board' as ref clock of the DSI PHY |
- 1 - |
2018-12-04 |
Matthias Kaehlcke |
|
New |
[v4,7/8] arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs |
- 2 - |
2018-12-04 |
Matthias Kaehlcke |
|
New |
[v4,6/8] arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY |
- 2 - |
2018-12-04 |
Matthias Kaehlcke |
|
New |
[v4,5/8] drm/msm/dsi: 10nm PHY: Get ref clock from the DT |
- 1 - |
2018-12-04 |
Matthias Kaehlcke |
|
New |
[v4,4/8] drm/msm/dsi: 14nm PHY: Get ref clock from the DT |
- 1 - |
2018-12-04 |
Matthias Kaehlcke |
|
New |
[v4,3/8] drm/msm/dsi: 28nm PHY: Get ref clock from the DT |
- 1 - |
2018-12-04 |
Matthias Kaehlcke |
|
New |
[v4,2/8] drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT |
- 1 - |
2018-12-04 |
Matthias Kaehlcke |
|
New |
[v4,1/8] dt-bindings: msm/dsi: Add ref clock for PHYs |
- 3 - |
2018-12-04 |
Matthias Kaehlcke |
|
New |
[v3,8/8] ARM: dts: qcom-apq8064: Set 'xo_board' as ref clock of the DSI PHY |
- 1 - |
2018-12-01 |
Matthias Kaehlcke |
|
New |
[v3,7/8] arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs |
- 2 - |
2018-12-01 |
Matthias Kaehlcke |
|
New |
[v3,6/8] arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY |
- 2 - |
2018-12-01 |
Matthias Kaehlcke |
|
New |
[v3,5/8] drm/msm/dsi: 10nm PHY: Get ref clock from the DT |
- 1 - |
2018-12-01 |
Matthias Kaehlcke |
|
New |
[v3,4/8] drm/msm/dsi: 14nm PHY: Get ref clock from the DT |
- 1 - |
2018-12-01 |
Matthias Kaehlcke |
|
New |
[v3,3/8] drm/msm/dsi: 28nm PHY: Get ref clock from the DT |
- - - |
2018-12-01 |
Matthias Kaehlcke |
|
New |
[v3,2/8] drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT |
- - - |
2018-12-01 |
Matthias Kaehlcke |
|
New |
[v3,1/8] dt-bindings: msm/dsi: Add ref clock for PHYs |
- 2 - |
2018-12-01 |
Matthias Kaehlcke |
|
New |
[v2,7/7] drm/msm/dsi: 10nm PHY: Get ref clock from the DT |
- - - |
2018-11-26 |
Matthias Kaehlcke |
|
New |
[v2,6/7] arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs |
- 1 - |
2018-11-26 |
Matthias Kaehlcke |
|
New |
[v2,5/7] drm/msm/dsi: 28nm PHY: Get ref clock from the DT |
- - - |
2018-11-26 |
Matthias Kaehlcke |
|
New |
[v2,4/7] arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY |
- 1 - |
2018-11-26 |
Matthias Kaehlcke |
|
New |
[v2,3/7] drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT |
- - - |
2018-11-26 |
Matthias Kaehlcke |
|
New |
[v2,2/7] drm/msm/dsi: 14nm PHY: Get ref clock from the DT |
- - - |
2018-11-26 |
Matthias Kaehlcke |
|
New |
[v2,1/7] dt-bindings: msm/dsi: Add ref clock for PHYs |
- - - |
2018-11-26 |
Matthias Kaehlcke |
|
New |
[v6,2/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC |
- 1 - |
2018-11-12 |
Matthias Kaehlcke |
|
New |
[v6,1/2] dt-bindings: iio: vadc: Add unit address to ADC channel node in example |
- 1 - |
2018-11-12 |
Matthias Kaehlcke |
|
New |
[2/2] drm/msm/dsi: Get PHY ref clock from the DT |
- - - |
2018-11-02 |
Matthias Kaehlcke |
|
New |
[1/2] dt-bindings: msm/dsi: Add ref clock for 10nm PHY |
- - - |
2018-11-02 |
Matthias Kaehlcke |
|
New |
[v2] arm64: dts: qcom: sdm845: Add UART nodes |
- 1 - |
2018-10-04 |
Matthias Kaehlcke |
|
New |
[v5,2/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC |
- 1 - |
2018-10-04 |
Matthias Kaehlcke |
|
New |
[v5,1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull' |
- 1 - |
2018-10-04 |
Matthias Kaehlcke |
|
New |
arm64: dts: qcom: sdm845: Add UART nodes |
- - - |
2018-10-03 |
Matthias Kaehlcke |
|
New |
arm64: dts: qcom: pm8998: Use ADC temperature to temp-alarm node |
- 1 - |
2018-09-27 |
Matthias Kaehlcke |
|
New |
[v3,3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC |
- 1 - |
2018-09-10 |
Matthias Kaehlcke |
|
New |
[v3,2/3] arm64: dts: qcom: pm8998: Add adc node |
- 1 - |
2018-09-10 |
Matthias Kaehlcke |
|
New |
[v3,1/3] dt-bindings: iio: vadc: Fix documentation of 'reg' |
- 2 - |
2018-09-10 |
Matthias Kaehlcke |
|
New |
[v2,3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC |
- 2 - |
2018-09-06 |
Matthias Kaehlcke |
|
New |
[v2,2/3] arm64: dts: qcom: pm8998: Add adc node |
- 1 - |
2018-09-06 |
Matthias Kaehlcke |
|
New |
[v2,1/3] dt-bindings: iio: vadc: Fix documentation of 'reg' |
- 2 - |
2018-09-06 |
Matthias Kaehlcke |
|
New |
[3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC |
- 1 - |
2018-08-08 |
Matthias Kaehlcke |
|
New |
[2/3] arm64: dts: qcom: pm8998: Add adc node |
- - - |
2018-08-08 |
Matthias Kaehlcke |
|
New |
[1/3] dt-bindings: iio: vadc: Fix documentation of 'reg' |
- 2 - |
2018-08-08 |
Matthias Kaehlcke |
|
New |
arm64: dts: sdm845: Add dispcc node |
- 1 - |
2018-08-03 |
Matthias Kaehlcke |
|
New |
[v6,5/5] arm64: dts: qcom: pm8998: Add pm8998 thermal zone |
- 1 - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v6,4/5] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node |
- 1 - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v6,3/5] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points |
- 1 - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v6,2/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Improve thermal zone in example |
- 2 - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v6,1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg' |
1 2 - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v6,5/5] arm64: dts: qcom: pm8998: Add pm8998 thermal zone |
- 1 - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v6,4/5] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node |
- 1 - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v6,3/5] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points |
- - - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v6,2/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Improve thermal zone in example |
- 1 - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v6,1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg' |
- 1 - |
2018-07-31 |
Matthias Kaehlcke |
|
New |
[v5,3/3] arm64: dts: qcom: pm8998: Add pm8998 thermal zone |
- 1 - |
2018-07-24 |
Matthias Kaehlcke |
|
New |
[v5,2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node |
- 1 - |
2018-07-24 |
Matthias Kaehlcke |
|
New |
[v5,1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points |
- - - |
2018-07-24 |
Matthias Kaehlcke |
|
New |
[v4,3/3] arm64: dts: qcom: pm8998: Add pm8998 thermal zone |
- - - |
2018-07-17 |
Matthias Kaehlcke |
|
New |
[v4,2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node |
- 1 - |
2018-07-17 |
Matthias Kaehlcke |
|
New |
[v4,1/3] thermal: qcom-spmi: Allow to disable stage 2 shutdown |
- - - |
2018-07-17 |
Matthias Kaehlcke |
|
New |
[v3,2/2] arm64: dts: qcom: pm8998: Add pm8998 thermal zone |
- - - |
2018-07-09 |
Matthias Kaehlcke |
|
New |
[v3,1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node |
- 1 - |
2018-07-09 |
Matthias Kaehlcke |
|
New |
[v2,2/2] arm64: dts: qcom: pm8998: Add pm8998 thermal zone |
- - - |
2018-07-02 |
Matthias Kaehlcke |
|
New |
[v2,1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node |
- - - |
2018-07-02 |
Matthias Kaehlcke |
|
New |
[3/3] arm64: dts: qcom: pm8998: Add thermal zone |
- - - |
2018-06-28 |
Matthias Kaehlcke |
|
New |
[2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node |
- - - |
2018-06-28 |
Matthias Kaehlcke |
|
New |
[1/3] arm64: dts: qcom: sdm845: Add thermal-zones node |
- - - |
2018-06-28 |
Matthias Kaehlcke |
|
New |