Patchwork Linux ARM for MSM

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 ... 102 103 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[2/2] arm64: dts: qcom: Add more msm8996 uarts - - - 2018-12-14 jakob.wuhrer@gmail.com New
[1/2] arm64: dts: qcom: Correct "gpiio" typo in msm8996-pins - - - 2018-12-14 jakob.wuhrer@gmail.com New
[v5] arm64: dts: sdm845: Add display nodes to MTP dts - - - 2018-12-06 abhinavk@codeaurora.org New
boot_constraint: Add constraints for earlycon on dragonboard 410c - - - 2018-11-16 saiprakash.ranjan@codeaurora.org New
[v2] drm/msm/dsi: fix dsi clock names in DSI 10nm PLL driver - - - 2018-10-11 abhinavk@codeaurora.org New
drm/msm/dsi: fix dsi clock names in DSI 10nm PLL driver - - - 2018-10-11 abhinavk@codeaurora.org New
[v10,2/2] dt-bindings: Add Truly NT35597 panel driver bindings - 3 - 2018-10-06 abhinavk@codeaurora.org New
[v10,1/2] drm/panel: Add support for Truly NT35597 panel driver - 1 - 2018-10-06 abhinavk@codeaurora.org New
[v9,2/2] dt-bindings: Add Truly NT35597 panel driver bindings - 2 - 2018-09-29 abhinavk@codeaurora.org New
[v9,1/2] drm/panel: Add support for Truly NT35597 panel driver - 1 - 2018-09-29 abhinavk@codeaurora.org New
[2/6] pstore: Add event tracing support - - - 2018-09-22 saiprakash.ranjan@codeaurora.org New
[v8,2/2] dt-bindings: Add Truly NT35597 panel driver bindings - 1 - 2018-09-20 abhinavk@codeaurora.org New
[v8,1/2] drm/panel: Add support for Truly NT35597 panel driver - 1 - 2018-09-20 abhinavk@codeaurora.org New
[v7,2/2] dt-bindings: Add Truly NT35597 panel driver bindings - 1 - 2018-09-20 abhinavk@codeaurora.org New
[v7,1/2] drm/panel: Add support for Truly NT35597 panel driver - - - 2018-09-20 abhinavk@codeaurora.org New
[2/6] pstore: Add event tracing support - - - 2018-09-11 saiprakash.ranjan@codeaurora.org New
[6/6] dynamic_debug: Add flag for dynamic event tracing - - - 2018-09-08 saiprakash.ranjan@codeaurora.org New
[5/6] arm64/io: Add header for instrumentation of io operations 1 - - 2018-09-08 saiprakash.ranjan@codeaurora.org New
[4/6] arm64/io: Add tracepoint for register accesses - - - 2018-09-08 saiprakash.ranjan@codeaurora.org New
[3/6] tracing: Add tp_pstore cmdline to have tracepoints go to pstore - - - 2018-09-08 saiprakash.ranjan@codeaurora.org New
[2/6] pstore: Add event tracing support - - - 2018-09-08 saiprakash.ranjan@codeaurora.org New
[1/6] dt-bindings: ramoops: Add event-size property - - - 2018-09-08 saiprakash.ranjan@codeaurora.org New
[RESEND,v6,2/2] dt-bindings: Add Truly NT35597 panel driver bindings - 1 - 2018-08-28 abhinavk@codeaurora.org New
[RESEND,v6,1/2] drm/panel: Add support for Truly NT35597 panel driver - - - 2018-08-28 abhinavk@codeaurora.org New
[RFC,v2,3/3] dynamic_debug: Add support for dynamic register trace - - - 2018-08-24 saiprakash.ranjan@codeaurora.org New
[RFC,v2,2/3] pstore: Add register read/write{b,w,l,q} tracing support - - - 2018-08-24 saiprakash.ranjan@codeaurora.org New
[RFC,v2,1/3] tracing: Add support for logging data to uncached buffer - - - 2018-08-24 saiprakash.ranjan@codeaurora.org New
[v6,2/2] dt-bindings: Add Truly NT35597 panel driver bindings - - - 2018-08-18 abhinavk@codeaurora.org New
[v6,1/2] drm/panel: Add support for Truly NT35597 panel driver - - - 2018-08-18 abhinavk@codeaurora.org New
[RFC,3/3] dynamic_debug: Add support for dynamic register trace - - - 2018-08-03 saiprakash.ranjan@codeaurora.org New
[RFC,2/3] pstore: Add register readl/writel tracing support - - - 2018-08-03 saiprakash.ranjan@codeaurora.org New
[RFC,1/3] tracing: Add support for logging data to uncached buffer - - - 2018-08-03 saiprakash.ranjan@codeaurora.org New
[v5,2/2] dt-bindings: Add Truly NT35597 panel bindings - - - 2018-08-03 abhinavk@codeaurora.org New
[v5,1/2] drm/panel: Add support for Truly NT35597 panel - - - 2018-08-03 abhinavk@codeaurora.org New
[v5,2/2] dt-bindings: Add Truly NT35597 panel bindings - - - 2018-08-03 abhinavk@codeaurora.org New
[v5,1/2] drm/panel: Add support for Truly NT35597 panel - - - 2018-08-03 abhinavk@codeaurora.org New
dwc3: Remove wait for wait_end_transfer event. - - - 2018-07-05 lemagoup@gmail.com New
[DPU] drm/msm/dsi: add only dsi nodes with a valid device to list - 1 - 2018-06-16 abhinavk@codeaurora.org New
[DPU] drm/msm/dsi: set encoder mode for DRM bridge explicitly - 1 - 2018-06-16 abhinavk@codeaurora.org New
[DPU] drm/msm/dsi: configure VCO rate for 10nm PLL driver - 1 - 2018-06-15 abhinavk@codeaurora.org New
[v13,8/8] clk: qcom: Add ACD path to CPU clock driver for msm8996 - - 1 2018-06-14 ilia.lin@gmail.com New
[v13,7/8] clk: qcom: cpu-8996: Add support to switch below 600Mhz - - 1 2018-06-14 ilia.lin@gmail.com New
[v13,6/8] clk: qcom: cpu-8996: Add support to switch to alternate PLL - - 1 2018-06-14 ilia.lin@gmail.com New
[v13,5/8] dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 - 1 1 2018-06-14 ilia.lin@gmail.com New
[v13,4/8] clk: qcom: Add CPU clock driver for msm8996 - - 1 2018-06-14 ilia.lin@gmail.com New
[v13,3/8] clk: Use devm_ in the register fixed factor clock - - 1 2018-06-14 ilia.lin@gmail.com New
[v13,2/8] clk: qcom: Make clk_alpha_pll_configure available to modules - - 1 2018-06-14 ilia.lin@gmail.com New
[v13,1/8] soc: qcom: Separate kryo l2 accessors from PMU driver - 1 1 2018-06-14 ilia.lin@gmail.com New
[DPU] drm/msm: remove support for seamless modes - - - 2018-06-13 abhinavk@codeaurora.org New
[DPU,v4] drm/msm: higher values of pclk can exceed 32 bits when multiplied by a factor - - - 2018-06-07 abhinavk@codeaurora.org New
[DPU,v4] drm/msm: higher values of pclk can exceed 32 bits when multiplied by a factor. - - - 2018-06-07 abhinavk@codeaurora.org New
[DPU,v3] Higher values of pclk can exceed 32 bits when multiplied by a factor. - - - 2018-06-02 abhinavk@codeaurora.org New
[DPU,v2] drm/msm: make pclk_rate u64 to avoid truncation - - - 2018-05-31 abhinavk@codeaurora.org New
[DPU] drm/msm: make pclk_rate u64 to avoid truncation - - - 2018-05-30 abhinavk@codeaurora.org New
[v4,2/2] dt-bindings: Add Truly NT35597 panel bindings - - - 2018-05-26 abhinavk@codeaurora.org New
[v4,1/2] drm/panel: Add support for Truly NT35597 panel - - - 2018-05-26 abhinavk@codeaurora.org New
[v3,2/2] dt-bindings: Add Truly NT35597 panel bindings - - - 2018-05-24 abhinavk@codeaurora.org New
[v3,1/2] drm/panel: Add support for Truly NT35597 panel - - - 2018-05-24 abhinavk@codeaurora.org New
[v3,2/2] dt-bindings: Add Truly NT35597 panel bindings - - - 2018-05-24 abhinavk@codeaurora.org New
[v3,1/2] Add support for Truly NT35597 panel used in MSM reference platforms. - - - 2018-05-24 abhinavk@codeaurora.org New
[DPU,v4,2/2] drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY - 2 - 2018-04-17 abhinavk@codeaurora.org New
[DPU,v4,1/2] drm/msm/dsi: check video mode engine status before waiting - - - 2018-04-17 abhinavk@codeaurora.org New
[DPU] drm/msm/dsi: check return value for video done waits - - - 2018-04-17 abhinavk@codeaurora.org New
[DPU,v3,2/2] drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY - 2 - 2018-04-17 abhinavk@codeaurora.org New
[DPU,v3,1/2] drm/msm/dsi: check video mode engine status before waiting - - - 2018-04-17 abhinavk@codeaurora.org New
[DPU,v2,2/2] drm/panel: add backlight control support for truly panel - - - 2018-04-14 abhinavk@codeaurora.org New
[DPU,v2,1/2] drm/panel: Add Truly NT35597 panel - - - 2018-04-14 abhinavk@codeaurora.org New
[DPU,v2,2/2] drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY - 2 - 2018-04-11 abhinavk@codeaurora.org New
[DPU,v2,1/2] drm/msm/dsi: check video mode engine status before waiting - - - 2018-04-11 abhinavk@codeaurora.org New
[DPU,2/2] drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY - 1 - 2018-04-07 abhinavk@codeaurora.org New
[DPU,1/2] drm/msm/dsi: check video mode engine status before waiting - - - 2018-04-07 abhinavk@codeaurora.org New
[DPU,2/2] drm/panel: add backlight control support for truly panel - - - 2018-04-07 abhinavk@codeaurora.org New
[DPU,1/2] drm/panel: Add Truly Dual DSI video mode panel - - - 2018-04-07 abhinavk@codeaurora.org New
[V1,2/2] pinctrl: qcom: spmi-gpio: Set is_enabled flag in set_mux() - - - 2017-10-13 fenglinw@codeaurora.org New
[V1,1/2] pinctrl: qcom: spmi-gpio: Read REG_EN_CTL to get initial enable state 1 - - 2017-10-13 fenglinw@codeaurora.org New
[V1] pinctrl: qcom: spmi-gpio: Update GPIO EN_CTL when setting pin config 1 - - 2017-09-12 fenglinw@codeaurora.org New
[V2] pinctrl: qcom: spmi-gpio: Correct power_source range check 1 - - 2017-08-28 fenglinw@codeaurora.org New
[V3,2/2] pinctrl: qcom: spmi-gpio: Add dtest route for digital input 2 - - 2017-08-15 fenglinw@codeaurora.org New
[V3,1/2] pinctrl: qcom: spmi-gpio: Add support for GPIO LV/MV subtype 2 - - 2017-08-15 fenglinw@codeaurora.org New
[V1] pinctrl: qcom: spmi-gpio: Add support for qcom,gpios-disallowed property - - - 2017-07-19 fenglinw@codeaurora.org New
[V1] pinctrl: qcom: spmi-gpio: Correct power_source range check 1 - - 2017-07-19 fenglinw@codeaurora.org New
[V2,2/2] pinctrl: qcom: spmi-gpio: Add dtest route for digital input 2 - - 2017-07-19 fenglinw@codeaurora.org New
[V2,1/2] pinctrl: qcom: spmi-gpio: Add support for GPIO LV/MV subtype 2 - - 2017-07-19 fenglinw@codeaurora.org New
[2/2] remoteproc: qcom: Register segments with remoteproc - - - 2017-06-14 spjoshi@codeaurora.org New
[1/2] remoteproc: Add remote processor coredump support - - - 2017-06-14 spjoshi@codeaurora.org New
[V1,3/3] pinctrl: qcom: spmi-gpio: Correct power_source range check - 1 - 2017-06-13 fenglinw@codeaurora.org New
[V1,2/3] pinctrl: qcom: spmi-gpio: Add dtest route for digital input 1 - - 2017-06-13 fenglinw@codeaurora.org New
[V1,1/3] pinctrl: qcom: spmi-gpio: Add support for GPIO LV/MV subtype - - - 2017-06-13 fenglinw@codeaurora.org New
remoteproc: qcom: mdt_loader: Fix rproc_da_to_va - - - 2017-06-07 spjoshi@codeaurora.org New
[V2,1/2] leds: leds-qti-rgb: Add LED driver for QTI TRI_LED module - - - 2017-06-01 fenglinw@codeaurora.org New
[V1,2/2] pwm: pwm-qti-lpg: Add PWM driver for QTI LPG module - - - 2017-05-31 fenglinw@codeaurora.org New
[V1,1/2] leds: leds-qti-rgb: Add LED driver for QTI TRI_LED module - - - 2017-05-31 fenglinw@codeaurora.org New
[v3,2/2] remoteproc: Modify recovery path to use rproc_{start,stop}() - - - 2017-05-26 spjoshi@codeaurora.org New
[v3,1/2] remoteproc: Introduce rproc_{start,stop}() functions - - - 2017-05-26 spjoshi@codeaurora.org New
[v2,2/2] remoteproc: Modify recovery path to use rproc_{start,stop}() - - - 2017-05-26 spjoshi@codeaurora.org New
[v2,1/2] remoteproc: Introduce rproc_{start,stop}() functions - - - 2017-05-26 spjoshi@codeaurora.org New
[2/2] remoteproc: Rearrange code to avoid duplication - - - 2017-05-02 spjoshi@codeaurora.org New
[1/2] remoteproc: Introduce rproc_{start,stop}() functions - - - 2017-05-02 spjoshi@codeaurora.org New
[1/2] remoteproc: Introduce rproc_{start,stop}() functions - - - 2017-02-07 spjoshi@codeaurora.org New
remoteproc: Drop qcom_scm_pas_supported() from adsp_probe() - - - 2017-02-03 spjoshi@codeaurora.org New
« Previous 1 2 3 4 5 6 7 8 9 10 ... 102 103 Next »