tty: serial: msm_serial: Remove __init from msm_console_setup() |
- 1 - |
2019-02-17 |
Jeffrey Hugo |
|
New |
[v2,4/4] arm64: dts: qcom: msm8998: Add mmcc node |
- - - |
2019-02-17 |
Jeffrey Hugo |
|
New |
[v2,3/4] clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver |
- - - |
2019-02-17 |
Jeffrey Hugo |
|
New |
[v2,2/4] dt-bindings: clock: Add support for the MSM8998 mmcc |
- - - |
2019-02-17 |
Jeffrey Hugo |
|
New |
[v2,1/4] clk: qcom: smd: Add XO clock for MSM8998 |
- - - |
2019-02-17 |
Jeffrey Hugo |
|
New |
arm64: dts: qcom: qcs404: Add non pas wcss remoteproc node |
- - - |
2019-02-16 |
Govind Singh |
|
New |
[GIT,PULL] Qualcomm Driver updates for 5.1 - Part 3 |
- - - |
2019-02-16 |
Andy Gross |
|
New |
[GIT,PULL] Qualcomm Device Tree updates for 5.1 - Part 2 |
- - - |
2019-02-15 |
Andy Gross |
|
New |
[GIT,PULL] Qualcomm Driver updates for 5.1 - Part 2 |
- - - |
2019-02-15 |
Andy Gross |
|
New |
[GIT,PULL] Qualcomm ARM64 DT updates for 5.1 - REVISED |
- - - |
2019-02-15 |
Andy Gross |
|
New |
iommu/arm-smmu: Allow disabling bypass via kernel config |
- - - |
2019-02-14 |
Doug Anderson |
|
New |
[2/2] PM / Domains: Mark "name" const in dev_pm_domain_attach_by_name() |
- 2 - |
2019-02-14 |
Doug Anderson |
|
New |
[1/2] PM / Domains: Mark "name" const in genpd_dev_pm_attach_by_name() |
1 2 - |
2019-02-14 |
Doug Anderson |
|
New |
soc: qcom: rpmhpd: Set 'active_only' for active only power domains |
1 1 - |
2019-02-14 |
Doug Anderson |
|
New |
drm/msm: fix an error code in the ioctl |
- - - |
2019-02-14 |
Dan Carpenter |
|
New |
[5/5] base: soc: Export soc_device_register/unregister APIs |
- - - |
2019-02-14 |
Vaishali Thakkar |
|
New |
[4/5] soc: qcom: socinfo: Expose image information |
- - - |
2019-02-14 |
Vaishali Thakkar |
|
New |
[3/5] soc: qcom: socinfo: Expose custom attributes |
- - - |
2019-02-14 |
Vaishali Thakkar |
|
New |
[2/5] soc: qcom: Add socinfo driver |
- - - |
2019-02-14 |
Vaishali Thakkar |
|
New |
[1/5] base: soc: Add serial_number attribute to soc |
- - - |
2019-02-14 |
Vaishali Thakkar |
|
New |
[v2,4/4] drm/msm/dpu: remove mode_set_complete |
- 1 - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v2,3/4] drm/msm/dpu: remove reserve in encoder mode_set |
- 1 - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v2,2/4] drm/msm/dpu: track HW resources using private object state |
- - - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v2,1/4] drm/msm/dpu: add atomic private object to dpu crtc |
- - - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[-next,3/3] qcom: ssbi-gpio: correct boundary conditions in pm8xxx_domain_translate |
- - - |
2019-02-14 |
Brian Masney |
|
New |
[-next,2/3] mfd: pm8xxx: select IRQ_DOMAIN_HIERARCHY in Kconfig |
- - - |
2019-02-14 |
Brian Masney |
|
New |
[-next,1/3] spmi: pmic-arb: select IRQ_DOMAIN_HIERARCHY in Kconfig |
1 - - |
2019-02-14 |
Brian Masney |
|
New |
[v2,7/7] drm/msm/dpu: check split role for single flush |
- - - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v2,6/7] drm/msm/dpu: assign intf to encoder in mode_set |
- - - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v2,5/7] drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset |
- - - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v2,4/7] drm/msm/dpu: dont use encoder->crtc in atomic path |
- - - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v2,3/7] drm/msm/dpu: release resources on modeset failure |
- - - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v2,2/7] drm/msm/dpu: remove phys_vid subclass |
- - - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v2,1/7] drm/msm/dpu: move hw_inf encoder baseclass |
- - - |
2019-02-14 |
Jeykumar Sankaran |
|
New |
[v4,5/8] arm64: dts: msm8996: Add UFS PHY reset controller |
- 1 - |
2019-02-13 |
Evan Green |
|
New |
[v4,4/8] arm64: dts: sdm845: Add UFS PHY reset |
- 1 - |
2019-02-13 |
Evan Green |
|
New |
net: phy: at803x: disable delay only for RGMII mode |
- - - |
2019-02-13 |
Niklas Cassel |
|
New |
thermal/qcom/tsens-common : fix possible object reference leak |
- - - |
2019-02-13 |
Peng Hao |
|
New |
arm64: dts: qcom: msm8998: Extend reserved memory area |
- - - |
2019-02-12 |
Marc Gonzalez |
|
New |
net: phy: at803x: disable delay only for RGMII mode |
- - 1 |
2019-02-12 |
Vinod Koul |
|
New |
drm/msm/a6xx: Add support for an interconnect path |
1 1 - |
2019-02-12 |
Georgi Djakov |
|
New |
qcom: spmi-gpio: Fix boundary conditions IRQ domain translate |
- 1 - |
2019-02-12 |
Bjorn Andersson |
|
New |
drm/msm/dpu: add icc voting in dpu_mdss_init |
- - - |
2019-02-12 |
abhinavk@codeaurora.org |
|
New |
arm64: dts: sdm845: Add dynamic CPU power coefficients |
- 2 - |
2019-02-11 |
Matthias Kaehlcke |
|
New |
[v1] clk: Probe defer clk_get() on orphans |
- - - |
2019-02-11 |
Jeffrey Hugo |
|
New |
[v2,3/3] clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock |
- - - |
2019-02-11 |
Vinod Koul |
|
New |
[v2,2/3] clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs |
- - - |
2019-02-11 |
Vinod Koul |
|
New |
[v2,1/3] clk: qcom: remove empty lines in clk-rcg.h |
- - - |
2019-02-11 |
Vinod Koul |
|
New |
[v1] clk: qcom: Make common clk_hw registrations |
- 1 1 |
2019-02-10 |
Jeffrey Hugo |
|
New |
ARM: qcom_defconfig: add options for LG Nexus 5 phone |
- - - |
2019-02-10 |
Brian Masney |
|
New |
arm64/io: Don't use WZR in writel |
- - - |
2019-02-09 |
AngeloGioacchino Del Regno |
|
New |
[v3,5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device" |
- - - |
2019-02-09 |
Alim Akhtar |
|
New |
[v4,7/7] arm64: dts: qcom: msm8998: Add UFS nodes |
- - - |
2019-02-08 |
Marc Gonzalez |
|
New |
[v4,6/7] Revert "scsi: ufs: disable vccq if it's not needed by UFS device" |
- 1 - |
2019-02-08 |
Marc Gonzalez |
|
New |
[v4,5/7] arm64: dts: qcom: msm8998: Allow drivers to set-load |
- 1 - |
2019-02-08 |
Marc Gonzalez |
|
New |
[v4,4/7] phy: qcom-qmp: Add QMP UFS PHY support for msm8998 |
- 1 - |
2019-02-08 |
Marc Gonzalez |
|
New |
[v4,3/7] dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy |
- - - |
2019-02-08 |
Marc Gonzalez |
|
New |
[v4,2/7] dt-bindings: ufs: Add msm8998 compatible string |
- - - |
2019-02-08 |
Marc Gonzalez |
|
New |
[v4,1/7] dt-bindings: ufs: Fix the compatible string definition |
- 2 - |
2019-02-08 |
Marc Gonzalez |
|
New |
[v2] qcom: apr: Make apr callbacks in non-atomic context |
- 1 - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v1,2/2] interconnect: qcom: Add tagging and wake/sleep support for sdm845 |
- - - |
2019-02-08 |
Georgi Djakov |
|
New |
[v1,1/2] interconnect: Add support for path tags |
- - - |
2019-02-08 |
Georgi Djakov |
|
New |
[v7,5/5] misc: fastrpc: Add support for dmabuf exporter |
- - - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v7,4/5] misc: fastrpc: Add support for create remote init process |
- - - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v7,3/5] misc: fastrpc: Add support for context Invoke method |
- - - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v7,2/5] misc: fastrpc: Add Qualcomm fastrpc basic driver model |
- - - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v7,1/5] misc: dt-bindings: Add Qualcomm Fastrpc bindings |
- 1 - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v6,5/5] misc: fastrpc: Add support for dmabuf exporter |
- - - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v6,4/5] misc: fastrpc: Add support for create remote init process |
- - - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v6,3/5] misc: fastrpc: Add support for context Invoke method |
- - - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v6,2/5] misc: fastrpc: Add Qualcomm fastrpc basic driver model |
- - - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[v6,1/5] misc: dt-bindings: Add Qualcomm Fastrpc bindings |
- 1 - |
2019-02-08 |
Srinivas Kandagatla |
|
New |
[-next] spmi: pmic-arb: revert "validate type when mapping IRQ" |
- - - |
2019-02-08 |
Brian Masney |
|
New |
[v2,11/11] mfd: pm8xxx: revert "disassociate old virq if hwirq mapping already exists" |
- - 1 |
2019-02-08 |
Brian Masney |
|
New |
[v2,10/11] ARM: dts: qcom-apq8060: Fix up interrupt parents |
- - - |
2019-02-08 |
Brian Masney |
|
New |
[v2,09/11] arm: dts: qcom: mdm9615: add interrupt controller properties |
- - - |
2019-02-08 |
Brian Masney |
|
New |
[v2,08/11] arm: dts: qcom: msm8660: add interrupt controller properties |
- - 1 |
2019-02-08 |
Brian Masney |
|
New |
[v2,07/11] arm: dts: qcom: apq8064: add interrupt controller properties |
- - - |
2019-02-08 |
Brian Masney |
|
New |
[v2,06/11] qcom: ssbi-gpio: add support for hierarchical IRQ chip |
- - 1 |
2019-02-08 |
Brian Masney |
|
New |
[v2,05/11] mfd: pm8xxx: disassociate old virq if hwirq mapping already exists |
- - 1 |
2019-02-08 |
Brian Masney |
|
New |
[v2,04/11] mfd: pm8xxx: convert to v2 irq interfaces to support hierarchical IRQ chips |
- - 1 |
2019-02-08 |
Brian Masney |
|
New |
[v2,03/11] genirq: introduce irq_chip_mask_ack_parent() |
1 - - |
2019-02-08 |
Brian Masney |
|
New |
[v2,02/11] genirq: introduce irq_domain_translate_twocell |
- 1 - |
2019-02-08 |
Brian Masney |
|
New |
[v2,01/11] pinctrl: qcom: ssbi-gpio: hardcode IRQ counts |
- - 1 |
2019-02-08 |
Brian Masney |
|
New |
[v4,4/4] phy: qualcomm: usb: Add SuperSpeed PHY driver |
- - - |
2019-02-07 |
Jorge Ramirez |
|
New |
[v4,3/4] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings |
- - - |
2019-02-07 |
Jorge Ramirez |
|
New |
[v4,2/4] dt-bindings: connector: Add vbus-supply property |
- 1 - |
2019-02-07 |
Jorge Ramirez |
|
New |
[v4,1/4] dt-bindings: phy: remove qcom-dwc3-usb-phy |
- 1 - |
2019-02-07 |
Jorge Ramirez |
|
New |
[v1,24/24] drivers: thermal: tsens: Move calibration constants to header file |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,23/24] arm64: dts: qcom: qcs404: Add thermal zones for each sensor |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,22/24] arm64: dts: qcom: qcs404: Add tsens controller |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,21/24] drivers: thermal: tsens: Add generic support for TSENS v1 IP |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,20/24] dt: thermal: tsens: Add bindings for qcs404 |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,19/24] drivers: thermal: tsens: Common get_temp() learns to do ADC conversion |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,18/24] drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharing |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,17/24] drivers: thermal: tsens: simplify get_temp_tsens_v2 routine |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,16/24] drivers: thermal: tsens: Introduce IP-specific max_sensor count |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,15/24] drivers: thermal: tsens: change data type for sensor IDs |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,14/24] drivers: thermal: tsens: Add new operation to check if a sensor is enabled |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |
[v1,13/24] drivers: thermal: tsens: Print IP version |
- - - |
2019-02-07 |
Amit Kucheria |
|
New |