Patchwork Linux ARM Kernel Devel

login
register
mail settings

Incoming patches

« Previous 1 2 3 Next »
Filters: Submitter = Maxime Ripard remove filter    |    State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[v4,2/2] media: cedrus: Add H264 decoding support - - - 2019-02-20 Maxime Ripard New
[v4,1/2] media: uapi: Add H264 low-level decoder API compound controls. - - - 2019-02-20 Maxime Ripard New
[v4,3/3] drm/panel: Add Ronbo RB070D30 panel - 2 - 2019-02-20 Maxime Ripard New
[v4,2/3] dt-bindings: panel: Add YAML schemas for the Ronbo RB070D30 panel - - - 2019-02-20 Maxime Ripard New
[v4,1/3] dt-bindings: Add vendor prefix for Ronbo Electronics - - - 2019-02-20 Maxime Ripard New
[v3,06/11] drm/sun4i: rgb: Add DT property to disable strict clock rate check - - - 2019-02-19 Maxime Ripard New
[v3,7/7] ARM: dts: sun5i: Add the MBUS controller - - - 2019-02-11 Maxime Ripard New
[v3,6/7] clk: sunxi-ng: sun5i: Export the MBUS clock - 1 - 2019-02-11 Maxime Ripard New
[v3,5/7] drm/sun4i: Rely on dma interconnect for our RAM offset 1 - - 2019-02-11 Maxime Ripard New
[v3,4/7] of: address: Add support for the parent DMA bus - - - 2019-02-11 Maxime Ripard New
[v3,3/7] of: address: Add parent pointer to the __of_translate_address args - - - 2019-02-11 Maxime Ripard New
[v3,2/7] dt-bindings: bus: Add binding for the Allwinner MBUS controller - - - 2019-02-11 Maxime Ripard New
[v3,1/7] dt-bindings: interconnect: Add a dma interconnect name - - - 2019-02-11 Maxime Ripard New
[v3,8/8] drm/panel: Add Ronbo RB070D30 panel - 2 - 2019-02-11 Maxime Ripard New
[v3,7/8] drm/sun4i: dsi: Add burst support - 1 - 2019-02-11 Maxime Ripard New
[v3,6/8] drm/sun4i: dsi: Rework a bit the hblk calculation - 1 - 2019-02-11 Maxime Ripard New
[v3,5/8] drm/sun4i: dsi: Fix DRQ calculation - 1 - 2019-02-11 Maxime Ripard New
[v3,4/8] drm/sun4i: dsi: Fix front vs back porch calculation - 1 - 2019-02-11 Maxime Ripard New
[v3,3/8] drm/sun4i: dsi: Enforce boundaries on the start delay - 1 - 2019-02-11 Maxime Ripard New
[v3,2/8] drm/sun4i: dsi: Change the start delay calculation - - - 2019-02-11 Maxime Ripard New
[v3,1/8] drm/sun4i: dsi: Restrict DSI tcon clock divider - 1 - 2019-02-11 Maxime Ripard New
[v3,2/2] media: cedrus: Add H264 decoding support - - - 2019-02-11 Maxime Ripard New
[v3,1/2] media: uapi: Add H264 low-level decoder API compound controls. - - - 2019-02-11 Maxime Ripard New
[v2,9/9] drm/panel: Add Ronbo RB070D30 panel - 1 - 2019-02-08 Maxime Ripard New
[v2,8/9] drm/sun4i: dsi: Add burst support - - - 2019-02-08 Maxime Ripard New
[v2,7/9] drm/sun4i: dsi: Rework a bit the hblk calculation - - - 2019-02-08 Maxime Ripard New
[v2,6/9] drm/sun4i: dsi: Fix DRQ calculation - - - 2019-02-08 Maxime Ripard New
[v2,5/9] drm/sun4i: dsi: Fix front vs back porch calculation - - - 2019-02-08 Maxime Ripard New
[v2,4/9] drm/sun4i: dsi: Enforce boundaries on the start delay - - - 2019-02-08 Maxime Ripard New
[v2,3/9] drm/sun4i: dsi: Change the start delay calculation - - - 2019-02-08 Maxime Ripard New
[v2,2/9] drm/sun4i: dsi: Restrict DSI tcon clock divider - 1 - 2019-02-08 Maxime Ripard New
[v2,1/9] fixup! ARM: dts: sun8i-a33: bridgemate: Enable display support - - - 2019-02-08 Maxime Ripard New
drm/sun4i: dsi: Fix unitialized variable warning - - - 2019-02-08 Maxime Ripard New
[v2,7/7] ARM: dts: sun5i: Add the MBUS controller - - - 2019-02-06 Maxime Ripard New
[v2,6/7] clk: sunxi-ng: sun5i: Export the MBUS clock - 1 - 2019-02-06 Maxime Ripard New
[v2,5/7] drm/sun4i: Rely on dma-parent for our RAM offset 1 - - 2019-02-06 Maxime Ripard New
[v2,4/7] of: address: Add support for the dma-parent property - - - 2019-02-06 Maxime Ripard New
[v2,3/7] of: address: Add parent pointer to the __of_translate_address args - - - 2019-02-06 Maxime Ripard New
[v2,2/7] dt-bindings: bus: Add binding for the Allwinner MBUS controller - - - 2019-02-06 Maxime Ripard New
[v2,1/7] dt-bindings: interconnect: Add a dma interconnect name - - - 2019-02-06 Maxime Ripard New
[v2,5/5] DO NOT MERGE: ARM: dts: bananapi: Add Camera support - - - 2019-01-28 Maxime Ripard New
[v2,4/5] ARM: dts: sun7i: Add CSI0 controller - - - 2019-01-28 Maxime Ripard New
[v2,3/5] media: sunxi: Add A10 CSI driver - - - 2019-01-28 Maxime Ripard New
[v2,2/5] media: sunxi: Refactor the Makefile and Kconfig - - - 2019-01-28 Maxime Ripard New
[v2,1/5] dt-bindings: media: Add Allwinner A10 CSI binding - - - 2019-01-28 Maxime Ripard New
[4/4] drm/panel: Add Rondo RB070D30 panel - - - 2019-01-23 Maxime Ripard New
[3/4] drm/sun4i: dsi: Add burst support - - - 2019-01-23 Maxime Ripard New
[2/4] drm/sun4i: dsi: Change the start delay calculation - - - 2019-01-23 Maxime Ripard New
[1/4] drm/sun4i: dsi: Restrict DSI tcon clock divider - 1 - 2019-01-23 Maxime Ripard New
[v5,9/9] drm/bridge: cdns: Convert to phy framework 1 - - 2019-01-21 Maxime Ripard New
[v5,8/9] phy: Add Cadence D-PHY support 1 - - 2019-01-21 Maxime Ripard New
[v5,7/9] dt-bindings: phy: Move the Cadence D-PHY bindings 1 - - 2019-01-21 Maxime Ripard New
[v5,6/9] drm/bridge: cdns: Separate DSI and D-PHY configuration - 1 - 2019-01-21 Maxime Ripard New
[v5,5/9] phy: Move Allwinner A31 D-PHY driver to drivers/phy/ - 1 - 2019-01-21 Maxime Ripard New
[v5,4/9] sun6i: dsi: Convert to generic phy handling - 1 - 2019-01-21 Maxime Ripard New
[v5,3/9] phy: dphy: Clarify lanes parameter documentation 1 - - 2019-01-21 Maxime Ripard New
[v5,2/9] phy: dphy: Change units of wakeup and init parameters 1 - - 2019-01-21 Maxime Ripard New
[v5,1/9] phy: dphy: Remove unused header 1 - - 2019-01-21 Maxime Ripard New
[v4,9/9] drm/bridge: cdns: Convert to phy framework 1 - - 2019-01-09 Maxime Ripard New
[v4,8/9] phy: Add Cadence D-PHY support - 1 - 2019-01-09 Maxime Ripard New
[v4,7/9] dt-bindings: phy: Move the Cadence D-PHY bindings - 1 - 2019-01-09 Maxime Ripard New
[v4,6/9] drm/bridge: cdns: Separate DSI and D-PHY configuration - - - 2019-01-09 Maxime Ripard New
[v4,5/9] phy: Move Allwinner A31 D-PHY driver to drivers/phy/ - - - 2019-01-09 Maxime Ripard New
[v4,4/9] sun6i: dsi: Convert to generic phy handling - 1 - 2019-01-09 Maxime Ripard New
[v4,3/9] phy: dphy: Clarify lanes parameter documentation - - - 2019-01-09 Maxime Ripard New
[v4,2/9] phy: dphy: Change units of wakeup and init parameters - - - 2019-01-09 Maxime Ripard New
[v4,1/9] phy: dphy: Remove unused header - - - 2019-01-09 Maxime Ripard New
dt-bindings: pinctrl: sunxi: Add supply properties - - - 2018-12-17 Maxime Ripard New
ARM: dts: suniv: Fix improper bindings include patch - - - 2018-12-14 Maxime Ripard New
[v3,10/10] drm/bridge: cdns: Convert to phy framework - - - 2018-12-07 Maxime Ripard New
[v3,09/10] phy: Add Cadence D-PHY support - - - 2018-12-07 Maxime Ripard New
[v3,08/10] dt-bindings: phy: Move the Cadence D-PHY bindings - - - 2018-12-07 Maxime Ripard New
[v3,07/10] drm/bridge: cdns: Separate DSI and D-PHY configuration - - - 2018-12-07 Maxime Ripard New
[v3,06/10] phy: Move Allwinner A31 D-PHY driver to drivers/phy/ - - - 2018-12-07 Maxime Ripard New
[v3,05/10] sun6i: dsi: Convert to generic phy handling - - - 2018-12-07 Maxime Ripard New
[v3,04/10] phy: dphy: Add configuration helpers - - - 2018-12-07 Maxime Ripard New
[v3,03/10] phy: Add MIPI D-PHY configuration options - 1 - 2018-12-07 Maxime Ripard New
[v3,02/10] phy: Add configuration interface - - - 2018-12-07 Maxime Ripard New
[v3,01/10] phy: Add MIPI D-PHY mode - 2 - 2018-12-07 Maxime Ripard New
[2/2] ARM: dts: sun7i: bananapi: Add GPIO banks regulators 1 - - 2018-12-06 Maxime Ripard New
[1/2] pinctrl: sunxi: Deal with per-bank regulators - - - 2018-12-06 Maxime Ripard New
[77/77] ARM: dts: sun9i: Add missing unit address - - - 2018-11-27 Maxime Ripard New
[76/77] ARM: dts: sun9i: Fix Display Engine DTC warnings 1 - - 2018-11-27 Maxime Ripard New
[75/77] ARM: dts: sun8i: r40: Fix Display Engine DTC warnings - - - 2018-11-27 Maxime Ripard New
[74/77] ARM: dts: sun8i: a83t: Fix Display Engine DTC warnings 1 - - 2018-11-27 Maxime Ripard New
[73/77] ARM: dts: sun8i: v3s: Fix Display Engine DTC warnings 1 - - 2018-11-27 Maxime Ripard New
[72/77] ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings 1 - - 2018-11-27 Maxime Ripard New
[71/77] ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers 1 - - 2018-11-27 Maxime Ripard New
[70/77] ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning 1 - - 2018-11-27 Maxime Ripard New
[69/77] ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings 1 - - 2018-11-27 Maxime Ripard New
[68/77] ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses 1 - - 2018-11-27 Maxime Ripard New
[67/77] ARM: dts: sun8i: BPI-M2M: Remove i2c nodes 1 - - 2018-11-27 Maxime Ripard New
[66/77] ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers 1 - - 2018-11-27 Maxime Ripard New
[65/77] ARM: dts: sunxi: reference: Move the muxing back to the common DTSI 1 - - 2018-11-27 Maxime Ripard New
[64/77] ARM: dts: sun8i: a23/a33: Remove underscores from nodes names 1 - - 2018-11-27 Maxime Ripard New
[63/77] ARM: dts: sun8i: a23/a33: Change pinctrl nodes to avoid warning 1 - - 2018-11-27 Maxime Ripard New
[62/77] ARM: dts: sun8i: a23/a33: Remove card detect pull-up 1 - - 2018-11-27 Maxime Ripard New
[61/77] ARM: dts: sun8i: a23/a33: Reorder the pin groups 1 - - 2018-11-27 Maxime Ripard New
[60/77] ARM: dts: sun8i: a23/a33: Change LRADC node names to avoid warnings 1 - - 2018-11-27 Maxime Ripard New
[59/77] ARM: dts: sun8i: a23/a33: Remove all useless pinctrl nodes 1 - - 2018-11-27 Maxime Ripard New
« Previous 1 2 3 Next »