Patchwork [v3,01/12] hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string

login
register
mail settings
Submitter Philippe Mathieu-Daudé
Date April 12, 2019, 4:54 p.m.
Message ID <20190412165416.7977-2-philmd@redhat.com>
Download mbox | patch
Permalink /patch/772063/
State New
Headers show

Comments

Philippe Mathieu-Daudé - April 12, 2019, 4:54 p.m.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/arm/aspeed.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

Patch

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 996812498dc..1c23ebd9925 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -19,6 +19,8 @@ 
 #include "hw/arm/aspeed_soc.h"
 #include "hw/boards.h"
 #include "hw/i2c/smbus_eeprom.h"
+#include "hw/misc/pca9552.h"
+#include "hw/misc/tmp105.h"
 #include "qemu/log.h"
 #include "sysemu/block-backend.h"
 #include "hw/loader.h"
@@ -267,7 +269,8 @@  static void ast2500_evb_i2c_init(AspeedBoardState *bmc)
                           eeprom_buf);
 
     /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
-    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7),
+                     TYPE_TMP105, 0x4d);
 
     /* The AST2500 EVB does not have an RTC. Let's pretend that one is
      * plugged on the I2C bus header */
@@ -288,13 +291,15 @@  static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
     AspeedSoCState *soc = &bmc->soc;
     uint8_t *eeprom_buf = g_malloc0(8 * 1024);
 
-    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552,
+                     0x60);
 
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c);
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c);
 
     /* The Witherspoon expects a TMP275 but a TMP105 is compatible */
-    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105,
+                     0x4a);
 
     /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
      * good enough */
@@ -302,7 +307,7 @@  static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
 
     smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
                           eeprom_buf);
-    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552",
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552,
                      0x60);
 }