Patchwork [3/5] usb: gadget: udc: lpc32xx: properly setup phy interrupts

login
register
mail settings
Submitter Alexandre Belloni
Date April 9, 2019, 12:09 p.m.
Message ID <20190409120908.12079-4-alexandre.belloni@bootlin.com>
Download mbox | patch
Permalink /patch/768547/
State New
Headers show

Comments

Alexandre Belloni - April 9, 2019, 12:09 p.m.
Only INT_VBUS_VLD is set to generate ATX interrupts on the phy but
INT_SESS_VLD is checked in vbus_work. This leads to cases where
hot-plugging USB doesn't work after boot.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/usb/gadget/udc/lpc32xx_udc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Patch

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 777279fa4637..12f2d76e50fe 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -604,11 +604,11 @@  static void isp1301_udc_configure(struct lpc32xx_udc *udc)
 	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
 		ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
 	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
-		ISP1301_I2C_INTERRUPT_FALLING, INT_VBUS_VLD);
+		ISP1301_I2C_INTERRUPT_FALLING, INT_SESS_VLD | INT_VBUS_VLD);
 	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
 		ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
 	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
-		ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD);
+		ISP1301_I2C_INTERRUPT_RISING, INT_SESS_VLD | INT_VBUS_VLD);
 
 	dev_info(udc->dev, "ISP1301 Vendor ID  : 0x%04x\n",
 		 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00));