Patchwork dmaengine: tegra210-adma: use devm_clk_*() helpers

login
register
mail settings
Submitter Sameer Pujar
Date March 12, 2019, 2:35 p.m.
Message ID <1552401352-30043-1-git-send-email-spujar@nvidia.com>
Download mbox | patch
Permalink /patch/747221/
State New
Headers show

Comments

Sameer Pujar - March 12, 2019, 2:35 p.m.
Usage of pm_clk_*() results in non-zero prepare_count for clocks and hence
module clocks remain ON always. This is not desired as it will leak power
unncessarily. This patch replaces pm_clk_*() with devm_clk_*() interface.
This helps to keep refcounts balanced when device is not in use and runtime
PM callbacks help to enable or disable clocks. System suspend/resume calls
can use pm_runtime_force_suspend/resume.

Suggested-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
---
 drivers/dma/tegra210-adma.c | 37 ++++++++++++++-----------------------
 1 file changed, 14 insertions(+), 23 deletions(-)
Jon Hunter - March 12, 2019, 3:24 p.m.
On 12/03/2019 14:35, Sameer Pujar wrote:
> Usage of pm_clk_*() results in non-zero prepare_count for clocks and hence
> module clocks remain ON always. This is not desired as it will leak power
> unncessarily. This patch replaces pm_clk_*() with devm_clk_*() interface.

Technically, this is not true for all devices. The actual problem here
is that for some Tegra devices that use the BPMP co-processor to manage
clocks, the clock are actually enabled during the prepare-phase and
hence when using the pm-clocks framework they are never disabled for
these devices. However, this is not the case for Tegra210 which does not
use the BPMP for managing clocks.

It maybe worth highlighting the fact the BPMP has to enable clocks
during the prepare phase because calls to the BPMP are always blocking.

> This helps to keep refcounts balanced when device is not in use and runtime
> PM callbacks help to enable or disable clocks. System suspend/resume calls
> can use pm_runtime_force_suspend/resume.

I think that this last bit should be a separate patch as it has nothing
to do with the $subject.

Cheers
Jon

Patch

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 5ec0dd9..be29171 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -22,7 +22,6 @@ 
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
 #include <linux/of_irq.h>
-#include <linux/pm_clock.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 
@@ -141,6 +140,7 @@  struct tegra_adma {
 	struct dma_device		dma_dev;
 	struct device			*dev;
 	void __iomem			*base_addr;
+	struct clk			*ahub_clk;
 	unsigned int			nr_channels;
 	unsigned long			rx_requests_reserved;
 	unsigned long			tx_requests_reserved;
@@ -637,8 +637,9 @@  static int tegra_adma_runtime_suspend(struct device *dev)
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
 
 	tdma->global_cmd = tdma_read(tdma, ADMA_GLOBAL_CMD);
+	clk_disable_unprepare(tdma->ahub_clk);
 
-	return pm_clk_suspend(dev);
+	return 0;
 }
 
 static int tegra_adma_runtime_resume(struct device *dev)
@@ -646,10 +647,11 @@  static int tegra_adma_runtime_resume(struct device *dev)
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
 	int ret;
 
-	ret = pm_clk_resume(dev);
-	if (ret)
+	ret = clk_prepare_enable(tdma->ahub_clk);
+	if (ret) {
+		dev_err(dev, "ahub clk_enable failed: %d\n", ret);
 		return ret;
-
+	}
 	tdma_write(tdma, ADMA_GLOBAL_CMD, tdma->global_cmd);
 
 	return 0;
@@ -693,13 +695,11 @@  static int tegra_adma_probe(struct platform_device *pdev)
 	if (IS_ERR(tdma->base_addr))
 		return PTR_ERR(tdma->base_addr);
 
-	ret = pm_clk_create(&pdev->dev);
-	if (ret)
-		return ret;
-
-	ret = of_pm_clk_add_clk(&pdev->dev, "d_audio");
-	if (ret)
-		goto clk_destroy;
+	tdma->ahub_clk = devm_clk_get(&pdev->dev, "d_audio");
+	if (IS_ERR(tdma->ahub_clk)) {
+		dev_err(&pdev->dev, "Error: Missing ahub controller clock\n");
+		return PTR_ERR(tdma->ahub_clk);
+	}
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -776,8 +776,6 @@  static int tegra_adma_probe(struct platform_device *pdev)
 	pm_runtime_put_sync(&pdev->dev);
 rpm_disable:
 	pm_runtime_disable(&pdev->dev);
-clk_destroy:
-	pm_clk_destroy(&pdev->dev);
 
 	return ret;
 }
@@ -794,22 +792,15 @@  static int tegra_adma_remove(struct platform_device *pdev)
 
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	pm_clk_destroy(&pdev->dev);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int tegra_adma_pm_suspend(struct device *dev)
-{
-	return pm_runtime_suspended(dev) == false;
-}
-#endif
-
 static const struct dev_pm_ops tegra_adma_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(tegra_adma_runtime_suspend,
 			   tegra_adma_runtime_resume, NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(tegra_adma_pm_suspend, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
 };
 
 static struct platform_driver tegra_admac_driver = {