Patchwork [dpdk-dev,27/38] net/sfc/base: update auto-generated MCDI definition headers

login
register
mail settings
Submitter Andrew Rybchenko
Date Feb. 7, 2019, 4:29 p.m.
Message ID <1549556983-10896-28-git-send-email-arybchenko@solarflare.com>
Download mbox | patch
Permalink /patch/720891/
State New
Headers show

Comments

Andrew Rybchenko - Feb. 7, 2019, 4:29 p.m.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
 drivers/net/sfc/base/ef10_tlv_layout.h   |   17 +
 drivers/net/sfc/base/efx_regs_mcdi.h     | 1262 +++++++++++++++++++---
 drivers/net/sfc/base/efx_regs_mcdi_aoe.h |   54 +-
 3 files changed, 1189 insertions(+), 144 deletions(-)

Patch

diff --git a/drivers/net/sfc/base/ef10_tlv_layout.h b/drivers/net/sfc/base/ef10_tlv_layout.h
index 56cffaee3..eaf24c569 100644
--- a/drivers/net/sfc/base/ef10_tlv_layout.h
+++ b/drivers/net/sfc/base/ef10_tlv_layout.h
@@ -1008,4 +1008,21 @@  struct tlv_l3xudp_ports {
 #define TLV_TAG_L3XUDP_PORTS_MAX_NUM_PORTS 16
 };
 
+/* Wake on LAN setting
+ *
+ * Enables the Wake On Lan (WoL) functionality on the given port. This will be
+ * a persistent setting for manageability firmware. Drivers have direct access
+ * to WoL using MCDI.
+ */
+#define TLV_TAG_WAKE_ON_LAN(port)       (0x102b0000 + (port))
+struct tlv_wake_on_lan {
+  uint32_t tag;
+  uint32_t length;
+  uint8_t  mode;
+  uint8_t  bytes[];
+#define TLV_WAKE_ON_LAN_MODE_DISABLED      0
+#define TLV_WAKE_ON_LAN_MODE_MAGIC_PACKET  1
+#define TLV_WAKE_ON_LAN_MAX_NUM_BYTES    255
+};
+
 #endif /* CI_MGMT_TLV_LAYOUT_H */
diff --git a/drivers/net/sfc/base/efx_regs_mcdi.h b/drivers/net/sfc/base/efx_regs_mcdi.h
index cf8a7936e..bc44602ed 100644
--- a/drivers/net/sfc/base/efx_regs_mcdi.h
+++ b/drivers/net/sfc/base/efx_regs_mcdi.h
@@ -4,7 +4,11 @@ 
  * All rights reserved.
  */
 
-/*! \cidoxg_firmware_mc_cmd */
+/*
+ * This file is automatically generated. DO NOT EDIT IT.
+ * To make changes, edit the .yml files in sfregistry under doc/mcdi/ and
+ * rebuild this file with "make -C doc mcdiheaders".
+ */
 
 #ifndef _SIENA_MC_DRIVER_PCOL_H
 #define	_SIENA_MC_DRIVER_PCOL_H
@@ -174,138 +178,9 @@ 
 #define FSE_AZ_EV_CODE_MCDI_EVRESPONSE 0xc
 
 
-/* Operation not permitted. */
-#define MC_CMD_ERR_EPERM 1
-/* Non-existent command target */
-#define MC_CMD_ERR_ENOENT 2
-/* assert() has killed the MC */
-#define MC_CMD_ERR_EINTR 4
-/* I/O failure */
-#define MC_CMD_ERR_EIO 5
-/* Already exists */
-#define MC_CMD_ERR_EEXIST 6
-/* Try again */
-#define MC_CMD_ERR_EAGAIN 11
-/* Out of memory */
-#define MC_CMD_ERR_ENOMEM 12
-/* Caller does not hold required locks */
-#define MC_CMD_ERR_EACCES 13
-/* Resource is currently unavailable (e.g. lock contention) */
-#define MC_CMD_ERR_EBUSY 16
-/* No such device */
-#define MC_CMD_ERR_ENODEV 19
-/* Invalid argument to target */
-#define MC_CMD_ERR_EINVAL 22
-/* Broken pipe */
-#define MC_CMD_ERR_EPIPE 32
-/* Read-only */
-#define MC_CMD_ERR_EROFS 30
-/* Out of range */
-#define MC_CMD_ERR_ERANGE 34
-/* Non-recursive resource is already acquired */
-#define MC_CMD_ERR_EDEADLK 35
-/* Operation not implemented */
-#define MC_CMD_ERR_ENOSYS 38
-/* Operation timed out */
-#define MC_CMD_ERR_ETIME 62
-/* Link has been severed */
-#define MC_CMD_ERR_ENOLINK 67
-/* Protocol error */
-#define MC_CMD_ERR_EPROTO 71
-/* Operation not supported */
-#define MC_CMD_ERR_ENOTSUP 95
-/* Address not available */
-#define MC_CMD_ERR_EADDRNOTAVAIL 99
-/* Not connected */
-#define MC_CMD_ERR_ENOTCONN 107
-/* Operation already in progress */
-#define MC_CMD_ERR_EALREADY 114
-
-/* Resource allocation failed. */
-#define MC_CMD_ERR_ALLOC_FAIL  0x1000
-/* V-adaptor not found. */
-#define MC_CMD_ERR_NO_VADAPTOR 0x1001
-/* EVB port not found. */
-#define MC_CMD_ERR_NO_EVB_PORT 0x1002
-/* V-switch not found. */
-#define MC_CMD_ERR_NO_VSWITCH  0x1003
-/* Too many VLAN tags. */
-#define MC_CMD_ERR_VLAN_LIMIT  0x1004
-/* Bad PCI function number. */
-#define MC_CMD_ERR_BAD_PCI_FUNC 0x1005
-/* Invalid VLAN mode. */
-#define MC_CMD_ERR_BAD_VLAN_MODE 0x1006
-/* Invalid v-switch type. */
-#define MC_CMD_ERR_BAD_VSWITCH_TYPE 0x1007
-/* Invalid v-port type. */
-#define MC_CMD_ERR_BAD_VPORT_TYPE 0x1008
-/* MAC address exists. */
-#define MC_CMD_ERR_MAC_EXIST 0x1009
-/* Slave core not present */
-#define MC_CMD_ERR_SLAVE_NOT_PRESENT 0x100a
-/* The datapath is disabled. */
-#define MC_CMD_ERR_DATAPATH_DISABLED 0x100b
-/* The requesting client is not a function */
-#define MC_CMD_ERR_CLIENT_NOT_FN  0x100c
-/* The requested operation might require the
-   command to be passed between MCs, and the
-   transport doesn't support that.  Should
-   only ever been seen over the UART. */
-#define MC_CMD_ERR_TRANSPORT_NOPROXY 0x100d
-/* VLAN tag(s) exists */
-#define MC_CMD_ERR_VLAN_EXIST 0x100e
-/* No MAC address assigned to an EVB port */
-#define MC_CMD_ERR_NO_MAC_ADDR 0x100f
-/* Notifies the driver that the request has been relayed
- * to an admin function for authorization. The driver should
- * wait for a PROXY_RESPONSE event and then resend its request.
- * This error code is followed by a 32-bit handle that
- * helps matching it with the respective PROXY_RESPONSE event. */
-#define MC_CMD_ERR_PROXY_PENDING 0x1010
-#define MC_CMD_ERR_PROXY_PENDING_HANDLE_OFST 4
-/* The request cannot be passed for authorization because
- * another request from the same function is currently being
- * authorized. The drvier should try again later. */
-#define MC_CMD_ERR_PROXY_INPROGRESS 0x1011
-/* Returned by MC_CMD_PROXY_COMPLETE if the caller is not the function
- * that has enabled proxying or BLOCK_INDEX points to a function that
- * doesn't await an authorization. */
-#define MC_CMD_ERR_PROXY_UNEXPECTED 0x1012
-/* This code is currently only used internally in FW. Its meaning is that
- * an operation failed due to lack of SR-IOV privilege.
- * Normally it is translated to EPERM by send_cmd_err(),
- * but it may also be used to trigger some special mechanism
- * for handling such case, e.g. to relay the failed request
- * to a designated admin function for authorization. */
-#define MC_CMD_ERR_NO_PRIVILEGE 0x1013
-/* Workaround 26807 could not be turned on/off because some functions
- * have already installed filters. See the comment at
- * MC_CMD_WORKAROUND_BUG26807.
- * May also returned for other operations such as sub-variant switching. */
-#define MC_CMD_ERR_FILTERS_PRESENT 0x1014
-/* The clock whose frequency you've attempted to set set
- * doesn't exist on this NIC */
-#define MC_CMD_ERR_NO_CLOCK 0x1015
-/* Returned by MC_CMD_TESTASSERT if the action that should
- * have caused an assertion failed to do so.  */
-#define MC_CMD_ERR_UNREACHABLE 0x1016
-/* This command needs to be processed in the background but there were no
- * resources to do so. Send it again after a command has completed. */
-#define MC_CMD_ERR_QUEUE_FULL 0x1017
-/* The operation could not be completed because the PCIe link has gone
- * away.  This error code is never expected to be returned over the TLP
- * transport. */
-#define MC_CMD_ERR_NO_PCIE 0x1018
-/* The operation could not be completed because the datapath has gone
- * away.  This is distinct from MC_CMD_ERR_DATAPATH_DISABLED in that the
- * datapath absence may be temporary*/
-#define MC_CMD_ERR_NO_DATAPATH 0x1019
-/* The operation could not complete because some VIs are allocated */
-#define MC_CMD_ERR_VIS_PRESENT 0x101a
-/* The operation could not complete because some PIO buffers are allocated */
-#define MC_CMD_ERR_PIOBUFS_PRESENT 0x101b
 
 #define MC_CMD_ERR_CODE_OFST 0
+#define MC_CMD_ERR_PROXY_PENDING_HANDLE_OFST 4
 
 /* We define 8 "escape" commands to allow
    for command number space extension */
@@ -376,12 +251,163 @@ 
  */
 #define MC_CMD_ERR_ARG_OFST 4
 
-/* No space */
-#define MC_CMD_ERR_ENOSPC 28
-
 #endif
 
-/* MCDI_EVENT structuredef */
+/* MC_CMD_ERR enum: Public MCDI error codes. Error codes that correspond to
+ * POSIX errnos should use the same numeric values that linux does. Error codes
+ * specific to Solarflare firmware should use values in the range 0x1000 -
+ * 0x10ff. The range 0x2000 - 0x20ff is reserved for private error codes (see
+ * MC_CMD_ERR_PRIV below).
+ */
+/* enum: Operation not permitted. */
+#define	MC_CMD_ERR_EPERM 0x1
+/* enum: Non-existent command target */
+#define	MC_CMD_ERR_ENOENT 0x2
+/* enum: assert() has killed the MC */
+#define	MC_CMD_ERR_EINTR 0x4
+/* enum: I/O failure */
+#define	MC_CMD_ERR_EIO 0x5
+/* enum: Already exists */
+#define	MC_CMD_ERR_EEXIST 0x6
+/* enum: Try again */
+#define	MC_CMD_ERR_EAGAIN 0xb
+/* enum: Out of memory */
+#define	MC_CMD_ERR_ENOMEM 0xc
+/* enum: Caller does not hold required locks */
+#define	MC_CMD_ERR_EACCES 0xd
+/* enum: Resource is currently unavailable (e.g. lock contention) */
+#define	MC_CMD_ERR_EBUSY 0x10
+/* enum: No such device */
+#define	MC_CMD_ERR_ENODEV 0x13
+/* enum: Invalid argument to target */
+#define	MC_CMD_ERR_EINVAL 0x16
+/* enum: No space */
+#define	MC_CMD_ERR_ENOSPC 0x1c
+/* enum: Read-only */
+#define	MC_CMD_ERR_EROFS 0x1e
+/* enum: Broken pipe */
+#define	MC_CMD_ERR_EPIPE 0x20
+/* enum: Out of range */
+#define	MC_CMD_ERR_ERANGE 0x22
+/* enum: Non-recursive resource is already acquired */
+#define	MC_CMD_ERR_EDEADLK 0x23
+/* enum: Operation not implemented */
+#define	MC_CMD_ERR_ENOSYS 0x26
+/* enum: Operation timed out */
+#define	MC_CMD_ERR_ETIME 0x3e
+/* enum: Link has been severed */
+#define	MC_CMD_ERR_ENOLINK 0x43
+/* enum: Protocol error */
+#define	MC_CMD_ERR_EPROTO 0x47
+/* enum: Bad message */
+#define	MC_CMD_ERR_EBADMSG 0x4a
+/* enum: Operation not supported */
+#define	MC_CMD_ERR_ENOTSUP 0x5f
+/* enum: Address not available */
+#define	MC_CMD_ERR_EADDRNOTAVAIL 0x63
+/* enum: Not connected */
+#define	MC_CMD_ERR_ENOTCONN 0x6b
+/* enum: Operation already in progress */
+#define	MC_CMD_ERR_EALREADY 0x72
+/* enum: Stale handle. The handle references a resource that no longer exists.
+ */
+#define	MC_CMD_ERR_ESTALE 0x74
+/* enum: Resource allocation failed. */
+#define	MC_CMD_ERR_ALLOC_FAIL 0x1000
+/* enum: V-adaptor not found. */
+#define	MC_CMD_ERR_NO_VADAPTOR 0x1001
+/* enum: EVB port not found. */
+#define	MC_CMD_ERR_NO_EVB_PORT 0x1002
+/* enum: V-switch not found. */
+#define	MC_CMD_ERR_NO_VSWITCH 0x1003
+/* enum: Too many VLAN tags. */
+#define	MC_CMD_ERR_VLAN_LIMIT 0x1004
+/* enum: Bad PCI function number. */
+#define	MC_CMD_ERR_BAD_PCI_FUNC 0x1005
+/* enum: Invalid VLAN mode. */
+#define	MC_CMD_ERR_BAD_VLAN_MODE 0x1006
+/* enum: Invalid v-switch type. */
+#define	MC_CMD_ERR_BAD_VSWITCH_TYPE 0x1007
+/* enum: Invalid v-port type. */
+#define	MC_CMD_ERR_BAD_VPORT_TYPE 0x1008
+/* enum: MAC address exists. */
+#define	MC_CMD_ERR_MAC_EXIST 0x1009
+/* enum: Slave core not present */
+#define	MC_CMD_ERR_SLAVE_NOT_PRESENT 0x100a
+/* enum: The datapath is disabled. */
+#define	MC_CMD_ERR_DATAPATH_DISABLED 0x100b
+/* enum: The requesting client is not a function */
+#define	MC_CMD_ERR_CLIENT_NOT_FN 0x100c
+/* enum: The requested operation might require the command to be passed between
+ * MCs, and thetransport doesn't support that. Should only ever been seen over
+ * the UART.
+ */
+#define	MC_CMD_ERR_TRANSPORT_NOPROXY 0x100d
+/* enum: VLAN tag(s) exists */
+#define	MC_CMD_ERR_VLAN_EXIST 0x100e
+/* enum: No MAC address assigned to an EVB port */
+#define	MC_CMD_ERR_NO_MAC_ADDR 0x100f
+/* enum: Notifies the driver that the request has been relayed to an admin
+ * function for authorization. The driver should wait for a PROXY_RESPONSE
+ * event and then resend its request. This error code is followed by a 32-bit
+ * handle that helps matching it with the respective PROXY_RESPONSE event.
+ */
+#define	MC_CMD_ERR_PROXY_PENDING 0x1010
+/* enum: The request cannot be passed for authorization because another request
+ * from the same function is currently being authorized. The drvier should try
+ * again later.
+ */
+#define	MC_CMD_ERR_PROXY_INPROGRESS 0x1011
+/* enum: Returned by MC_CMD_PROXY_COMPLETE if the caller is not the function
+ * that has enabled proxying or BLOCK_INDEX points to a function that doesn't
+ * await an authorization.
+ */
+#define	MC_CMD_ERR_PROXY_UNEXPECTED 0x1012
+/* enum: This code is currently only used internally in FW. Its meaning is that
+ * an operation failed due to lack of SR-IOV privilege. Normally it is
+ * translated to EPERM by send_cmd_err(), but it may also be used to trigger
+ * some special mechanism for handling such case, e.g. to relay the failed
+ * request to a designated admin function for authorization.
+ */
+#define	MC_CMD_ERR_NO_PRIVILEGE 0x1013
+/* enum: Workaround 26807 could not be turned on/off because some functions
+ * have already installed filters. See the comment at
+ * MC_CMD_WORKAROUND_BUG26807. May also returned for other operations such as
+ * sub-variant switching.
+ */
+#define	MC_CMD_ERR_FILTERS_PRESENT 0x1014
+/* enum: The clock whose frequency you've attempted to set set doesn't exist on
+ * this NIC
+ */
+#define	MC_CMD_ERR_NO_CLOCK 0x1015
+/* enum: Returned by MC_CMD_TESTASSERT if the action that should have caused an
+ * assertion failed to do so.
+ */
+#define	MC_CMD_ERR_UNREACHABLE 0x1016
+/* enum: This command needs to be processed in the background but there were no
+ * resources to do so. Send it again after a command has completed.
+ */
+#define	MC_CMD_ERR_QUEUE_FULL 0x1017
+/* enum: The operation could not be completed because the PCIe link has gone
+ * away. This error code is never expected to be returned over the TLP
+ * transport.
+ */
+#define	MC_CMD_ERR_NO_PCIE 0x1018
+/* enum: The operation could not be completed because the datapath has gone
+ * away. This is distinct from MC_CMD_ERR_DATAPATH_DISABLED in that the
+ * datapath absence may be temporary
+ */
+#define	MC_CMD_ERR_NO_DATAPATH 0x1019
+/* enum: The operation could not complete because some VIs are allocated */
+#define	MC_CMD_ERR_VIS_PRESENT 0x101a
+/* enum: The operation could not complete because some PIO buffers are
+ * allocated
+ */
+#define	MC_CMD_ERR_PIOBUFS_PRESENT 0x101b
+
+/* MCDI_EVENT structuredef: The structure of an MCDI_EVENT on Siena/EF10
+ * platforms
+ */
 #define	MCDI_EVENT_LEN 8
 #define	MCDI_EVENT_CONT_LBN 32
 #define	MCDI_EVENT_CONT_WIDTH 1
@@ -596,6 +622,22 @@ 
 #define	MCDI_EVENT_SUC_ERR_ADDRESS_WIDTH 24
 #define	MCDI_EVENT_SUC_ERR_DATA_LBN 8
 #define	MCDI_EVENT_SUC_ERR_DATA_WIDTH 24
+#define	MCDI_EVENT_LINKCHANGE_V2_LP_CAP_LBN 0
+#define	MCDI_EVENT_LINKCHANGE_V2_LP_CAP_WIDTH 24
+#define	MCDI_EVENT_LINKCHANGE_V2_SPEED_LBN 24
+#define	MCDI_EVENT_LINKCHANGE_V2_SPEED_WIDTH 4
+/*             Enum values, see field(s): */
+/*                MCDI_EVENT/LINKCHANGE_SPEED */
+#define	MCDI_EVENT_LINKCHANGE_V2_FLAGS_LINK_UP_LBN 28
+#define	MCDI_EVENT_LINKCHANGE_V2_FLAGS_LINK_UP_WIDTH 1
+#define	MCDI_EVENT_LINKCHANGE_V2_FCNTL_LBN 29
+#define	MCDI_EVENT_LINKCHANGE_V2_FCNTL_WIDTH 3
+/*             Enum values, see field(s): */
+/*                MC_CMD_SET_MAC/MC_CMD_SET_MAC_IN/FCNTL */
+#define	MCDI_EVENT_MODULECHANGE_LD_CAP_LBN 0
+#define	MCDI_EVENT_MODULECHANGE_LD_CAP_WIDTH 30
+#define	MCDI_EVENT_MODULECHANGE_SEQ_LBN 30
+#define	MCDI_EVENT_MODULECHANGE_SEQ_WIDTH 2
 #define	MCDI_EVENT_DATA_LBN 0
 #define	MCDI_EVENT_DATA_WIDTH 32
 #define	MCDI_EVENT_SRC_LBN 36
@@ -674,6 +716,15 @@ 
 #define	MCDI_EVENT_CODE_DBRET 0x1e
 /* enum: The MC has detected a fault on the SUC */
 #define	MCDI_EVENT_CODE_SUC 0x1f
+/* enum: Link change. This event is sent instead of LINKCHANGE if
+ * WANT_V2_LINKCHANGES was set on driver attach.
+ */
+#define	MCDI_EVENT_CODE_LINKCHANGE_V2 0x20
+/* enum: This event is sent if WANT_V2_LINKCHANGES was set on driver attach
+ * when the local device capabilities changes. This will usually correspond to
+ * a module change.
+ */
+#define	MCDI_EVENT_CODE_MODULECHANGE 0x21
 /* enum: Artificial event generated by host and posted via MC for test
  * purposes.
  */
@@ -799,6 +850,14 @@ 
 #define	MCDI_EVENT_DBRET_DATA_LEN 4
 #define	MCDI_EVENT_DBRET_DATA_LBN 0
 #define	MCDI_EVENT_DBRET_DATA_WIDTH 32
+#define	MCDI_EVENT_LINKCHANGE_V2_DATA_OFST 0
+#define	MCDI_EVENT_LINKCHANGE_V2_DATA_LEN 4
+#define	MCDI_EVENT_LINKCHANGE_V2_DATA_LBN 0
+#define	MCDI_EVENT_LINKCHANGE_V2_DATA_WIDTH 32
+#define	MCDI_EVENT_MODULECHANGE_DATA_OFST 0
+#define	MCDI_EVENT_MODULECHANGE_DATA_LEN 4
+#define	MCDI_EVENT_MODULECHANGE_DATA_LBN 0
+#define	MCDI_EVENT_MODULECHANGE_DATA_WIDTH 32
 
 /* FCDI_EVENT structuredef */
 #define	FCDI_EVENT_LEN 8
@@ -906,6 +965,7 @@ 
  */
 #define	FCDI_EXTENDED_EVENT_PPS_LENMIN 16
 #define	FCDI_EXTENDED_EVENT_PPS_LENMAX 248
+#define	FCDI_EXTENDED_EVENT_PPS_LENMAX_MCDI2 1016
 #define	FCDI_EXTENDED_EVENT_PPS_LEN(num) (8+8*(num))
 /* Number of timestamps following */
 #define	FCDI_EXTENDED_EVENT_PPS_COUNT_OFST 0
@@ -929,6 +989,7 @@ 
 #define	FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_HI_OFST 12
 #define	FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_MINNUM 1
 #define	FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_MAXNUM 30
+#define	FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_MAXNUM_MCDI2 126
 #define	FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_LBN 64
 #define	FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_WIDTH 64
 
@@ -1044,11 +1105,13 @@ 
 /* MC_CMD_READ32_OUT msgresponse */
 #define	MC_CMD_READ32_OUT_LENMIN 4
 #define	MC_CMD_READ32_OUT_LENMAX 252
+#define	MC_CMD_READ32_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_READ32_OUT_LEN(num) (0+4*(num))
 #define	MC_CMD_READ32_OUT_BUFFER_OFST 0
 #define	MC_CMD_READ32_OUT_BUFFER_LEN 4
 #define	MC_CMD_READ32_OUT_BUFFER_MINNUM 1
 #define	MC_CMD_READ32_OUT_BUFFER_MAXNUM 63
+#define	MC_CMD_READ32_OUT_BUFFER_MAXNUM_MCDI2 255
 
 
 /***********************************/
@@ -1063,6 +1126,7 @@ 
 /* MC_CMD_WRITE32_IN msgrequest */
 #define	MC_CMD_WRITE32_IN_LENMIN 8
 #define	MC_CMD_WRITE32_IN_LENMAX 252
+#define	MC_CMD_WRITE32_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_WRITE32_IN_LEN(num) (4+4*(num))
 #define	MC_CMD_WRITE32_IN_ADDR_OFST 0
 #define	MC_CMD_WRITE32_IN_ADDR_LEN 4
@@ -1070,6 +1134,7 @@ 
 #define	MC_CMD_WRITE32_IN_BUFFER_LEN 4
 #define	MC_CMD_WRITE32_IN_BUFFER_MINNUM 1
 #define	MC_CMD_WRITE32_IN_BUFFER_MAXNUM 62
+#define	MC_CMD_WRITE32_IN_BUFFER_MAXNUM_MCDI2 254
 
 /* MC_CMD_WRITE32_OUT msgresponse */
 #define	MC_CMD_WRITE32_OUT_LEN 0
@@ -1457,6 +1522,7 @@ 
 /* MC_CMD_PTP_IN_TRANSMIT msgrequest */
 #define	MC_CMD_PTP_IN_TRANSMIT_LENMIN 13
 #define	MC_CMD_PTP_IN_TRANSMIT_LENMAX 252
+#define	MC_CMD_PTP_IN_TRANSMIT_LENMAX_MCDI2 1020
 #define	MC_CMD_PTP_IN_TRANSMIT_LEN(num) (12+1*(num))
 /*            MC_CMD_PTP_IN_CMD_OFST 0 */
 /*            MC_CMD_PTP_IN_CMD_LEN 4 */
@@ -1470,6 +1536,7 @@ 
 #define	MC_CMD_PTP_IN_TRANSMIT_PACKET_LEN 1
 #define	MC_CMD_PTP_IN_TRANSMIT_PACKET_MINNUM 1
 #define	MC_CMD_PTP_IN_TRANSMIT_PACKET_MAXNUM 240
+#define	MC_CMD_PTP_IN_TRANSMIT_PACKET_MAXNUM_MCDI2 1008
 
 /* MC_CMD_PTP_IN_READ_NIC_TIME msgrequest */
 #define	MC_CMD_PTP_IN_READ_NIC_TIME_LEN 8
@@ -1622,6 +1689,7 @@ 
 /* MC_CMD_PTP_IN_FPGAWRITE msgrequest */
 #define	MC_CMD_PTP_IN_FPGAWRITE_LENMIN 13
 #define	MC_CMD_PTP_IN_FPGAWRITE_LENMAX 252
+#define	MC_CMD_PTP_IN_FPGAWRITE_LENMAX_MCDI2 1020
 #define	MC_CMD_PTP_IN_FPGAWRITE_LEN(num) (12+1*(num))
 /*            MC_CMD_PTP_IN_CMD_OFST 0 */
 /*            MC_CMD_PTP_IN_CMD_LEN 4 */
@@ -1633,6 +1701,7 @@ 
 #define	MC_CMD_PTP_IN_FPGAWRITE_BUFFER_LEN 1
 #define	MC_CMD_PTP_IN_FPGAWRITE_BUFFER_MINNUM 1
 #define	MC_CMD_PTP_IN_FPGAWRITE_BUFFER_MAXNUM 240
+#define	MC_CMD_PTP_IN_FPGAWRITE_BUFFER_MAXNUM_MCDI2 1008
 
 /* MC_CMD_PTP_IN_CLOCK_OFFSET_ADJUST msgrequest */
 #define	MC_CMD_PTP_IN_CLOCK_OFFSET_ADJUST_LEN 16
@@ -1963,12 +2032,14 @@ 
 /* MC_CMD_PTP_OUT_SYNCHRONIZE msgresponse */
 #define	MC_CMD_PTP_OUT_SYNCHRONIZE_LENMIN 20
 #define	MC_CMD_PTP_OUT_SYNCHRONIZE_LENMAX 240
+#define	MC_CMD_PTP_OUT_SYNCHRONIZE_LENMAX_MCDI2 1020
 #define	MC_CMD_PTP_OUT_SYNCHRONIZE_LEN(num) (0+20*(num))
 /* A set of host and NIC times */
 #define	MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_OFST 0
 #define	MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_LEN 20
 #define	MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_MINNUM 1
 #define	MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_MAXNUM 12
+#define	MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_MAXNUM_MCDI2 51
 /* Host time immediately before NIC's hardware clock read */
 #define	MC_CMD_PTP_OUT_SYNCHRONIZE_HOSTSTART_OFST 0
 #define	MC_CMD_PTP_OUT_SYNCHRONIZE_HOSTSTART_LEN 4
@@ -2045,11 +2116,13 @@ 
 /* MC_CMD_PTP_OUT_FPGAREAD msgresponse */
 #define	MC_CMD_PTP_OUT_FPGAREAD_LENMIN 1
 #define	MC_CMD_PTP_OUT_FPGAREAD_LENMAX 252
+#define	MC_CMD_PTP_OUT_FPGAREAD_LENMAX_MCDI2 1020
 #define	MC_CMD_PTP_OUT_FPGAREAD_LEN(num) (0+1*(num))
 #define	MC_CMD_PTP_OUT_FPGAREAD_BUFFER_OFST 0
 #define	MC_CMD_PTP_OUT_FPGAREAD_BUFFER_LEN 1
 #define	MC_CMD_PTP_OUT_FPGAREAD_BUFFER_MINNUM 1
 #define	MC_CMD_PTP_OUT_FPGAREAD_BUFFER_MAXNUM 252
+#define	MC_CMD_PTP_OUT_FPGAREAD_BUFFER_MAXNUM_MCDI2 1020
 
 /* MC_CMD_PTP_OUT_GET_TIME_FORMAT msgresponse */
 #define	MC_CMD_PTP_OUT_GET_TIME_FORMAT_LEN 4
@@ -2183,12 +2256,14 @@ 
 /* MC_CMD_CSR_READ32_OUT msgresponse */
 #define	MC_CMD_CSR_READ32_OUT_LENMIN 4
 #define	MC_CMD_CSR_READ32_OUT_LENMAX 252
+#define	MC_CMD_CSR_READ32_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_CSR_READ32_OUT_LEN(num) (0+4*(num))
 /* The last dword is the status, not a value read */
 #define	MC_CMD_CSR_READ32_OUT_BUFFER_OFST 0
 #define	MC_CMD_CSR_READ32_OUT_BUFFER_LEN 4
 #define	MC_CMD_CSR_READ32_OUT_BUFFER_MINNUM 1
 #define	MC_CMD_CSR_READ32_OUT_BUFFER_MAXNUM 63
+#define	MC_CMD_CSR_READ32_OUT_BUFFER_MAXNUM_MCDI2 255
 
 
 /***********************************/
@@ -2203,6 +2278,7 @@ 
 /* MC_CMD_CSR_WRITE32_IN msgrequest */
 #define	MC_CMD_CSR_WRITE32_IN_LENMIN 12
 #define	MC_CMD_CSR_WRITE32_IN_LENMAX 252
+#define	MC_CMD_CSR_WRITE32_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_CSR_WRITE32_IN_LEN(num) (8+4*(num))
 /* Address */
 #define	MC_CMD_CSR_WRITE32_IN_ADDR_OFST 0
@@ -2213,6 +2289,7 @@ 
 #define	MC_CMD_CSR_WRITE32_IN_BUFFER_LEN 4
 #define	MC_CMD_CSR_WRITE32_IN_BUFFER_MINNUM 1
 #define	MC_CMD_CSR_WRITE32_IN_BUFFER_MAXNUM 61
+#define	MC_CMD_CSR_WRITE32_IN_BUFFER_MAXNUM_MCDI2 253
 
 /* MC_CMD_CSR_WRITE32_OUT msgresponse */
 #define	MC_CMD_CSR_WRITE32_OUT_LEN 4
@@ -2283,12 +2360,14 @@ 
 /* MC_CMD_STACKINFO_OUT msgresponse */
 #define	MC_CMD_STACKINFO_OUT_LENMIN 12
 #define	MC_CMD_STACKINFO_OUT_LENMAX 252
+#define	MC_CMD_STACKINFO_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_STACKINFO_OUT_LEN(num) (0+12*(num))
 /* (thread ptr, stack size, free space) for each thread in system */
 #define	MC_CMD_STACKINFO_OUT_THREAD_INFO_OFST 0
 #define	MC_CMD_STACKINFO_OUT_THREAD_INFO_LEN 12
 #define	MC_CMD_STACKINFO_OUT_THREAD_INFO_MINNUM 1
 #define	MC_CMD_STACKINFO_OUT_THREAD_INFO_MAXNUM 21
+#define	MC_CMD_STACKINFO_OUT_THREAD_INFO_MAXNUM_MCDI2 85
 
 
 /***********************************/
@@ -2399,6 +2478,7 @@ 
 /* MC_CMD_DBI_WRITE_IN msgrequest */
 #define	MC_CMD_DBI_WRITE_IN_LENMIN 12
 #define	MC_CMD_DBI_WRITE_IN_LENMAX 252
+#define	MC_CMD_DBI_WRITE_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_DBI_WRITE_IN_LEN(num) (0+12*(num))
 /* Each write op consists of an address (offset 0), byte enable/VF/CS2 (offset
  * 32) and value (offset 64). See MC_CMD_DBIWROP_TYPEDEF.
@@ -2407,6 +2487,7 @@ 
 #define	MC_CMD_DBI_WRITE_IN_DBIWROP_LEN 12
 #define	MC_CMD_DBI_WRITE_IN_DBIWROP_MINNUM 1
 #define	MC_CMD_DBI_WRITE_IN_DBIWROP_MAXNUM 21
+#define	MC_CMD_DBI_WRITE_IN_DBIWROP_MAXNUM_MCDI2 85
 
 /* MC_CMD_DBI_WRITE_OUT msgresponse */
 #define	MC_CMD_DBI_WRITE_OUT_LEN 0
@@ -2566,6 +2647,7 @@ 
 /* MC_CMD_GET_BOARD_CFG_OUT msgresponse */
 #define	MC_CMD_GET_BOARD_CFG_OUT_LENMIN 96
 #define	MC_CMD_GET_BOARD_CFG_OUT_LENMAX 136
+#define	MC_CMD_GET_BOARD_CFG_OUT_LENMAX_MCDI2 136
 #define	MC_CMD_GET_BOARD_CFG_OUT_LEN(num) (72+2*(num))
 #define	MC_CMD_GET_BOARD_CFG_OUT_BOARD_TYPE_OFST 0
 #define	MC_CMD_GET_BOARD_CFG_OUT_BOARD_TYPE_LEN 4
@@ -2621,6 +2703,7 @@ 
 #define	MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_LEN 2
 #define	MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_MINNUM 12
 #define	MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_MAXNUM 32
+#define	MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_MAXNUM_MCDI2 32
 
 
 /***********************************/
@@ -2635,6 +2718,7 @@ 
 /* MC_CMD_DBI_READX_IN msgrequest */
 #define	MC_CMD_DBI_READX_IN_LENMIN 8
 #define	MC_CMD_DBI_READX_IN_LENMAX 248
+#define	MC_CMD_DBI_READX_IN_LENMAX_MCDI2 1016
 #define	MC_CMD_DBI_READX_IN_LEN(num) (0+8*(num))
 /* Each Read op consists of an address (offset 0), VF/CS2) */
 #define	MC_CMD_DBI_READX_IN_DBIRDOP_OFST 0
@@ -2643,16 +2727,19 @@ 
 #define	MC_CMD_DBI_READX_IN_DBIRDOP_HI_OFST 4
 #define	MC_CMD_DBI_READX_IN_DBIRDOP_MINNUM 1
 #define	MC_CMD_DBI_READX_IN_DBIRDOP_MAXNUM 31
+#define	MC_CMD_DBI_READX_IN_DBIRDOP_MAXNUM_MCDI2 127
 
 /* MC_CMD_DBI_READX_OUT msgresponse */
 #define	MC_CMD_DBI_READX_OUT_LENMIN 4
 #define	MC_CMD_DBI_READX_OUT_LENMAX 252
+#define	MC_CMD_DBI_READX_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_DBI_READX_OUT_LEN(num) (0+4*(num))
 /* Value */
 #define	MC_CMD_DBI_READX_OUT_VALUE_OFST 0
 #define	MC_CMD_DBI_READX_OUT_VALUE_LEN 4
 #define	MC_CMD_DBI_READX_OUT_VALUE_MINNUM 1
 #define	MC_CMD_DBI_READX_OUT_VALUE_MAXNUM 63
+#define	MC_CMD_DBI_READX_OUT_VALUE_MAXNUM_MCDI2 255
 
 /* MC_CMD_DBIRDOP_TYPEDEF structuredef */
 #define	MC_CMD_DBIRDOP_TYPEDEF_LEN 8
@@ -2703,12 +2790,14 @@ 
 /* MC_CMD_LTSSM_HIST_OUT msgresponse */
 #define	MC_CMD_LTSSM_HIST_OUT_LENMIN 0
 #define	MC_CMD_LTSSM_HIST_OUT_LENMAX 252
+#define	MC_CMD_LTSSM_HIST_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_LTSSM_HIST_OUT_LEN(num) (0+4*(num))
 /* variable number of LTSSM values, as bytes. The history is read-to-clear. */
 #define	MC_CMD_LTSSM_HIST_OUT_DATA_OFST 0
 #define	MC_CMD_LTSSM_HIST_OUT_DATA_LEN 4
 #define	MC_CMD_LTSSM_HIST_OUT_DATA_MINNUM 0
 #define	MC_CMD_LTSSM_HIST_OUT_DATA_MAXNUM 63
+#define	MC_CMD_LTSSM_HIST_OUT_DATA_MAXNUM_MCDI2 255
 
 
 /***********************************/
@@ -2742,6 +2831,10 @@ 
 #define	MC_CMD_DRV_ATTACH_IN_SUBVARIANT_AWARE_WIDTH 1
 #define	MC_CMD_DRV_ATTACH_IN_WANT_VI_SPREADING_LBN 3
 #define	MC_CMD_DRV_ATTACH_IN_WANT_VI_SPREADING_WIDTH 1
+#define	MC_CMD_DRV_ATTACH_IN_WANT_V2_LINKCHANGES_LBN 4
+#define	MC_CMD_DRV_ATTACH_IN_WANT_V2_LINKCHANGES_WIDTH 1
+#define	MC_CMD_DRV_ATTACH_IN_WANT_RX_VI_SPREADING_INHIBIT_LBN 5
+#define	MC_CMD_DRV_ATTACH_IN_WANT_RX_VI_SPREADING_INHIBIT_WIDTH 1
 /* 1 to set new state, or 0 to just report the existing state */
 #define	MC_CMD_DRV_ATTACH_IN_UPDATE_OFST 4
 #define	MC_CMD_DRV_ATTACH_IN_UPDATE_LEN 4
@@ -2779,6 +2872,71 @@ 
 /* enum: Only this option is allowed for non-admin functions */
 #define	MC_CMD_FW_DONT_CARE 0xffffffff
 
+/* MC_CMD_DRV_ATTACH_IN_V2 msgrequest: Updated DRV_ATTACH to include driver
+ * version
+ */
+#define	MC_CMD_DRV_ATTACH_IN_V2_LEN 32
+/* new state to set if UPDATE=1 */
+#define	MC_CMD_DRV_ATTACH_IN_V2_NEW_STATE_OFST 0
+#define	MC_CMD_DRV_ATTACH_IN_V2_NEW_STATE_LEN 4
+/*             MC_CMD_DRV_ATTACH_LBN 0 */
+/*             MC_CMD_DRV_ATTACH_WIDTH 1 */
+#define	MC_CMD_DRV_ATTACH_IN_V2_ATTACH_LBN 0
+#define	MC_CMD_DRV_ATTACH_IN_V2_ATTACH_WIDTH 1
+/*             MC_CMD_DRV_PREBOOT_LBN 1 */
+/*             MC_CMD_DRV_PREBOOT_WIDTH 1 */
+#define	MC_CMD_DRV_ATTACH_IN_V2_PREBOOT_LBN 1
+#define	MC_CMD_DRV_ATTACH_IN_V2_PREBOOT_WIDTH 1
+#define	MC_CMD_DRV_ATTACH_IN_V2_SUBVARIANT_AWARE_LBN 2
+#define	MC_CMD_DRV_ATTACH_IN_V2_SUBVARIANT_AWARE_WIDTH 1
+#define	MC_CMD_DRV_ATTACH_IN_V2_WANT_VI_SPREADING_LBN 3
+#define	MC_CMD_DRV_ATTACH_IN_V2_WANT_VI_SPREADING_WIDTH 1
+#define	MC_CMD_DRV_ATTACH_IN_V2_WANT_V2_LINKCHANGES_LBN 4
+#define	MC_CMD_DRV_ATTACH_IN_V2_WANT_V2_LINKCHANGES_WIDTH 1
+#define	MC_CMD_DRV_ATTACH_IN_V2_WANT_RX_VI_SPREADING_INHIBIT_LBN 5
+#define	MC_CMD_DRV_ATTACH_IN_V2_WANT_RX_VI_SPREADING_INHIBIT_WIDTH 1
+/* 1 to set new state, or 0 to just report the existing state */
+#define	MC_CMD_DRV_ATTACH_IN_V2_UPDATE_OFST 4
+#define	MC_CMD_DRV_ATTACH_IN_V2_UPDATE_LEN 4
+/* preferred datapath firmware (for Huntington; ignored for Siena) */
+#define	MC_CMD_DRV_ATTACH_IN_V2_FIRMWARE_ID_OFST 8
+#define	MC_CMD_DRV_ATTACH_IN_V2_FIRMWARE_ID_LEN 4
+/* enum: Prefer to use full featured firmware */
+/*               MC_CMD_FW_FULL_FEATURED 0x0 */
+/* enum: Prefer to use firmware with fewer features but lower latency */
+/*               MC_CMD_FW_LOW_LATENCY 0x1 */
+/* enum: Prefer to use firmware for SolarCapture packed stream mode */
+/*               MC_CMD_FW_PACKED_STREAM 0x2 */
+/* enum: Prefer to use firmware with fewer features and simpler TX event
+ * batching but higher TX packet rate
+ */
+/*               MC_CMD_FW_HIGH_TX_RATE 0x3 */
+/* enum: Reserved value */
+/*               MC_CMD_FW_PACKED_STREAM_HASH_MODE_1 0x4 */
+/* enum: Prefer to use firmware with additional "rules engine" filtering
+ * support
+ */
+/*               MC_CMD_FW_RULES_ENGINE 0x5 */
+/* enum: Prefer to use firmware with additional DPDK support */
+/*               MC_CMD_FW_DPDK 0x6 */
+/* enum: Prefer to use "l3xudp" custom datapath firmware (see SF-119495-PD and
+ * bug69716)
+ */
+/*               MC_CMD_FW_L3XUDP 0x7 */
+/* enum: Requests that the MC keep whatever datapath firmware is currently
+ * running. It's used for test purposes, where we want to be able to shmboot
+ * special test firmware variants. This option is only recognised in eftest
+ * (i.e. non-production) builds.
+ */
+/*               MC_CMD_FW_KEEP_CURRENT_EFTEST_ONLY 0xfffffffe */
+/* enum: Only this option is allowed for non-admin functions */
+/*               MC_CMD_FW_DONT_CARE 0xffffffff */
+/* Version of the driver to be reported by management protocols (e.g. NC-SI)
+ * handled by the NIC. This is a zero-terminated ASCII string.
+ */
+#define	MC_CMD_DRV_ATTACH_IN_V2_DRIVER_VERSION_OFST 12
+#define	MC_CMD_DRV_ATTACH_IN_V2_DRIVER_VERSION_LEN 20
+
 /* MC_CMD_DRV_ATTACH_OUT msgresponse */
 #define	MC_CMD_DRV_ATTACH_OUT_LEN 4
 /* previous or existing state, see the bitmask at NEW_STATE */
@@ -2810,6 +2968,11 @@ 
  * input.
  */
 #define	MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_VI_SPREADING_ENABLED 0x4
+/* enum: If set, indicates that VI spreading is inhibited on RX. See
+ * description of WANT_RX_VI_SPREADING_INHIBIT above. It is an error to set
+ * this flag without also setting FLAG_VI_SPREADING_ENABLED.
+ */
+#define	MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_RX_VI_SPREADING_INHIBITED 0x5
 
 
 /***********************************/
@@ -2975,6 +3138,7 @@ 
 /* MC_CMD_PUTS_IN msgrequest */
 #define	MC_CMD_PUTS_IN_LENMIN 13
 #define	MC_CMD_PUTS_IN_LENMAX 252
+#define	MC_CMD_PUTS_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_PUTS_IN_LEN(num) (12+1*(num))
 #define	MC_CMD_PUTS_IN_DEST_OFST 0
 #define	MC_CMD_PUTS_IN_DEST_LEN 4
@@ -2988,6 +3152,7 @@ 
 #define	MC_CMD_PUTS_IN_STRING_LEN 1
 #define	MC_CMD_PUTS_IN_STRING_MINNUM 1
 #define	MC_CMD_PUTS_IN_STRING_MAXNUM 240
+#define	MC_CMD_PUTS_IN_STRING_MAXNUM_MCDI2 1008
 
 /* MC_CMD_PUTS_OUT msgresponse */
 #define	MC_CMD_PUTS_OUT_LEN 0
@@ -3340,11 +3505,13 @@ 
 /* MC_CMD_FLUSH_RX_QUEUES_IN msgrequest */
 #define	MC_CMD_FLUSH_RX_QUEUES_IN_LENMIN 4
 #define	MC_CMD_FLUSH_RX_QUEUES_IN_LENMAX 252
+#define	MC_CMD_FLUSH_RX_QUEUES_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_FLUSH_RX_QUEUES_IN_LEN(num) (0+4*(num))
 #define	MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_OFST 0
 #define	MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_LEN 4
 #define	MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_MINNUM 1
 #define	MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_MAXNUM 63
+#define	MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_MAXNUM_MCDI2 255
 
 /* MC_CMD_FLUSH_RX_QUEUES_OUT msgresponse */
 #define	MC_CMD_FLUSH_RX_QUEUES_OUT_LEN 0
@@ -3694,6 +3861,10 @@ 
 #define	MC_CMD_GET_LINK_OUT_LINK_FAULT_RX_WIDTH 1
 #define	MC_CMD_GET_LINK_OUT_LINK_FAULT_TX_LBN 7
 #define	MC_CMD_GET_LINK_OUT_LINK_FAULT_TX_WIDTH 1
+#define	MC_CMD_GET_LINK_OUT_MODULE_UP_VALID_LBN 8
+#define	MC_CMD_GET_LINK_OUT_MODULE_UP_VALID_WIDTH 1
+#define	MC_CMD_GET_LINK_OUT_MODULE_UP_LBN 9
+#define	MC_CMD_GET_LINK_OUT_MODULE_UP_WIDTH 1
 /* This returns the negotiated flow control value. */
 #define	MC_CMD_GET_LINK_OUT_FCNTL_OFST 20
 #define	MC_CMD_GET_LINK_OUT_FCNTL_LEN 4
@@ -3746,6 +3917,10 @@ 
 #define	MC_CMD_GET_LINK_OUT_V2_LINK_FAULT_RX_WIDTH 1
 #define	MC_CMD_GET_LINK_OUT_V2_LINK_FAULT_TX_LBN 7
 #define	MC_CMD_GET_LINK_OUT_V2_LINK_FAULT_TX_WIDTH 1
+#define	MC_CMD_GET_LINK_OUT_V2_MODULE_UP_VALID_LBN 8
+#define	MC_CMD_GET_LINK_OUT_V2_MODULE_UP_VALID_WIDTH 1
+#define	MC_CMD_GET_LINK_OUT_V2_MODULE_UP_LBN 9
+#define	MC_CMD_GET_LINK_OUT_V2_MODULE_UP_WIDTH 1
 /* This returns the negotiated flow control value. */
 #define	MC_CMD_GET_LINK_OUT_V2_FCNTL_OFST 20
 #define	MC_CMD_GET_LINK_OUT_V2_FCNTL_LEN 4
@@ -3805,7 +3980,7 @@ 
 /***********************************/
 /* MC_CMD_SET_LINK
  * Write the unified MAC/PHY link configuration. Locks required: None. Return
- * code: 0, EINVAL, ETIME
+ * code: 0, EINVAL, ETIME, EAGAIN
  */
 #define	MC_CMD_SET_LINK 0x2a
 #undef	MC_CMD_0x2a_PRIVILEGE_CTG
@@ -3839,6 +4014,42 @@ 
 #define	MC_CMD_SET_LINK_IN_LOOPBACK_SPEED_OFST 12
 #define	MC_CMD_SET_LINK_IN_LOOPBACK_SPEED_LEN 4
 
+/* MC_CMD_SET_LINK_IN_V2 msgrequest: Updated SET_LINK to include sequence
+ * number to ensure this SET_LINK command corresponds to the latest
+ * MODULECHANGE event.
+ */
+#define	MC_CMD_SET_LINK_IN_V2_LEN 17
+/* Near-side advertised capabilities. Refer to
+ * MC_CMD_GET_PHY_CFG_OUT/SUPPORTED_CAP for bit definitions.
+ */
+#define	MC_CMD_SET_LINK_IN_V2_CAP_OFST 0
+#define	MC_CMD_SET_LINK_IN_V2_CAP_LEN 4
+/* Flags */
+#define	MC_CMD_SET_LINK_IN_V2_FLAGS_OFST 4
+#define	MC_CMD_SET_LINK_IN_V2_FLAGS_LEN 4
+#define	MC_CMD_SET_LINK_IN_V2_LOWPOWER_LBN 0
+#define	MC_CMD_SET_LINK_IN_V2_LOWPOWER_WIDTH 1
+#define	MC_CMD_SET_LINK_IN_V2_POWEROFF_LBN 1
+#define	MC_CMD_SET_LINK_IN_V2_POWEROFF_WIDTH 1
+#define	MC_CMD_SET_LINK_IN_V2_TXDIS_LBN 2
+#define	MC_CMD_SET_LINK_IN_V2_TXDIS_WIDTH 1
+/* Loopback mode. */
+#define	MC_CMD_SET_LINK_IN_V2_LOOPBACK_MODE_OFST 8
+#define	MC_CMD_SET_LINK_IN_V2_LOOPBACK_MODE_LEN 4
+/*            Enum values, see field(s): */
+/*               MC_CMD_GET_LOOPBACK_MODES/MC_CMD_GET_LOOPBACK_MODES_OUT/100M */
+/* A loopback speed of "0" is supported, and means (choose any available
+ * speed).
+ */
+#define	MC_CMD_SET_LINK_IN_V2_LOOPBACK_SPEED_OFST 12
+#define	MC_CMD_SET_LINK_IN_V2_LOOPBACK_SPEED_LEN 4
+#define	MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_OFST 16
+#define	MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_LEN 1
+#define	MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_NUMBER_LBN 0
+#define	MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_NUMBER_WIDTH 7
+#define	MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_IGNORE_LBN 7
+#define	MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_IGNORE_WIDTH 1
+
 /* MC_CMD_SET_LINK_OUT msgresponse */
 #define	MC_CMD_SET_LINK_OUT_LEN 0
 
@@ -4486,12 +4697,14 @@ 
 /* MC_CMD_MEMCPY_IN msgrequest */
 #define	MC_CMD_MEMCPY_IN_LENMIN 32
 #define	MC_CMD_MEMCPY_IN_LENMAX 224
+#define	MC_CMD_MEMCPY_IN_LENMAX_MCDI2 992
 #define	MC_CMD_MEMCPY_IN_LEN(num) (0+32*(num))
 /* see MC_CMD_MEMCPY_RECORD_TYPEDEF */
 #define	MC_CMD_MEMCPY_IN_RECORD_OFST 0
 #define	MC_CMD_MEMCPY_IN_RECORD_LEN 32
 #define	MC_CMD_MEMCPY_IN_RECORD_MINNUM 1
 #define	MC_CMD_MEMCPY_IN_RECORD_MAXNUM 7
+#define	MC_CMD_MEMCPY_IN_RECORD_MAXNUM_MCDI2 31
 
 /* MC_CMD_MEMCPY_OUT msgresponse */
 #define	MC_CMD_MEMCPY_OUT_LEN 0
@@ -4763,6 +4976,8 @@ 
 #define	MC_CMD_NVRAM_INFO_OUT_TLV_WIDTH 1
 #define	MC_CMD_NVRAM_INFO_OUT_READ_ONLY_IF_TSA_BOUND_LBN 2
 #define	MC_CMD_NVRAM_INFO_OUT_READ_ONLY_IF_TSA_BOUND_WIDTH 1
+#define	MC_CMD_NVRAM_INFO_OUT_CRC_LBN 3
+#define	MC_CMD_NVRAM_INFO_OUT_CRC_WIDTH 1
 #define	MC_CMD_NVRAM_INFO_OUT_READ_ONLY_LBN 5
 #define	MC_CMD_NVRAM_INFO_OUT_READ_ONLY_WIDTH 1
 #define	MC_CMD_NVRAM_INFO_OUT_CMAC_LBN 6
@@ -4910,11 +5125,13 @@ 
 /* MC_CMD_NVRAM_READ_OUT msgresponse */
 #define	MC_CMD_NVRAM_READ_OUT_LENMIN 1
 #define	MC_CMD_NVRAM_READ_OUT_LENMAX 252
+#define	MC_CMD_NVRAM_READ_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_NVRAM_READ_OUT_LEN(num) (0+1*(num))
 #define	MC_CMD_NVRAM_READ_OUT_READ_BUFFER_OFST 0
 #define	MC_CMD_NVRAM_READ_OUT_READ_BUFFER_LEN 1
 #define	MC_CMD_NVRAM_READ_OUT_READ_BUFFER_MINNUM 1
 #define	MC_CMD_NVRAM_READ_OUT_READ_BUFFER_MAXNUM 252
+#define	MC_CMD_NVRAM_READ_OUT_READ_BUFFER_MAXNUM_MCDI2 1020
 
 
 /***********************************/
@@ -4931,6 +5148,7 @@ 
 /* MC_CMD_NVRAM_WRITE_IN msgrequest */
 #define	MC_CMD_NVRAM_WRITE_IN_LENMIN 13
 #define	MC_CMD_NVRAM_WRITE_IN_LENMAX 252
+#define	MC_CMD_NVRAM_WRITE_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_NVRAM_WRITE_IN_LEN(num) (12+1*(num))
 #define	MC_CMD_NVRAM_WRITE_IN_TYPE_OFST 0
 #define	MC_CMD_NVRAM_WRITE_IN_TYPE_LEN 4
@@ -4944,6 +5162,7 @@ 
 #define	MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_LEN 1
 #define	MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_MINNUM 1
 #define	MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_MAXNUM 240
+#define	MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_MAXNUM_MCDI2 1008
 
 /* MC_CMD_NVRAM_WRITE_OUT msgresponse */
 #define	MC_CMD_NVRAM_WRITE_OUT_LEN 0
@@ -5130,11 +5349,13 @@ 
 /* MC_CMD_SCHEDINFO_OUT msgresponse */
 #define	MC_CMD_SCHEDINFO_OUT_LENMIN 4
 #define	MC_CMD_SCHEDINFO_OUT_LENMAX 252
+#define	MC_CMD_SCHEDINFO_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_SCHEDINFO_OUT_LEN(num) (0+4*(num))
 #define	MC_CMD_SCHEDINFO_OUT_DATA_OFST 0
 #define	MC_CMD_SCHEDINFO_OUT_DATA_LEN 4
 #define	MC_CMD_SCHEDINFO_OUT_DATA_MINNUM 1
 #define	MC_CMD_SCHEDINFO_OUT_DATA_MAXNUM 63
+#define	MC_CMD_SCHEDINFO_OUT_DATA_MAXNUM_MCDI2 255
 
 
 /***********************************/
@@ -5218,9 +5439,26 @@ 
 #define	MC_CMD_SENSOR_INFO_EXT_IN_PAGE_OFST 0
 #define	MC_CMD_SENSOR_INFO_EXT_IN_PAGE_LEN 4
 
+/* MC_CMD_SENSOR_INFO_EXT_IN_V2 msgrequest */
+#define	MC_CMD_SENSOR_INFO_EXT_IN_V2_LEN 8
+/* Which page of sensors to report.
+ *
+ * Page 0 contains sensors 0 to 30 (sensor 31 is the next page bit).
+ *
+ * Page 1 contains sensors 32 to 62 (sensor 63 is the next page bit). etc.
+ */
+#define	MC_CMD_SENSOR_INFO_EXT_IN_V2_PAGE_OFST 0
+#define	MC_CMD_SENSOR_INFO_EXT_IN_V2_PAGE_LEN 4
+/* Flags controlling information retrieved */
+#define	MC_CMD_SENSOR_INFO_EXT_IN_V2_FLAGS_OFST 4
+#define	MC_CMD_SENSOR_INFO_EXT_IN_V2_FLAGS_LEN 4
+#define	MC_CMD_SENSOR_INFO_EXT_IN_V2_ENGINEERING_LBN 0
+#define	MC_CMD_SENSOR_INFO_EXT_IN_V2_ENGINEERING_WIDTH 1
+
 /* MC_CMD_SENSOR_INFO_OUT msgresponse */
 #define	MC_CMD_SENSOR_INFO_OUT_LENMIN 4
 #define	MC_CMD_SENSOR_INFO_OUT_LENMAX 252
+#define	MC_CMD_SENSOR_INFO_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_SENSOR_INFO_OUT_LEN(num) (4+8*(num))
 #define	MC_CMD_SENSOR_INFO_OUT_MASK_OFST 0
 #define	MC_CMD_SENSOR_INFO_OUT_MASK_LEN 4
@@ -5398,6 +5636,22 @@ 
 #define	MC_CMD_SENSOR_IN_1V3 0x55
 /* enum: 1.3v power current: mA */
 #define	MC_CMD_SENSOR_IN_I1V3 0x56
+/* enum: Engineering sensor 1 */
+#define	MC_CMD_SENSOR_ENGINEERING_1 0x57
+/* enum: Engineering sensor 2 */
+#define	MC_CMD_SENSOR_ENGINEERING_2 0x58
+/* enum: Engineering sensor 3 */
+#define	MC_CMD_SENSOR_ENGINEERING_3 0x59
+/* enum: Engineering sensor 4 */
+#define	MC_CMD_SENSOR_ENGINEERING_4 0x5a
+/* enum: Engineering sensor 5 */
+#define	MC_CMD_SENSOR_ENGINEERING_5 0x5b
+/* enum: Engineering sensor 6 */
+#define	MC_CMD_SENSOR_ENGINEERING_6 0x5c
+/* enum: Engineering sensor 7 */
+#define	MC_CMD_SENSOR_ENGINEERING_7 0x5d
+/* enum: Engineering sensor 8 */
+#define	MC_CMD_SENSOR_ENGINEERING_8 0x5e
 /* enum: Not a sensor: reserved for the next page flag */
 #define	MC_CMD_SENSOR_PAGE2_NEXT 0x5f
 /* MC_CMD_SENSOR_INFO_ENTRY_TYPEDEF */
@@ -5407,10 +5661,12 @@ 
 #define	MC_CMD_SENSOR_ENTRY_HI_OFST 8
 #define	MC_CMD_SENSOR_ENTRY_MINNUM 0
 #define	MC_CMD_SENSOR_ENTRY_MAXNUM 31
+#define	MC_CMD_SENSOR_ENTRY_MAXNUM_MCDI2 127
 
 /* MC_CMD_SENSOR_INFO_EXT_OUT msgresponse */
 #define	MC_CMD_SENSOR_INFO_EXT_OUT_LENMIN 4
 #define	MC_CMD_SENSOR_INFO_EXT_OUT_LENMAX 252
+#define	MC_CMD_SENSOR_INFO_EXT_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_SENSOR_INFO_EXT_OUT_LEN(num) (4+8*(num))
 #define	MC_CMD_SENSOR_INFO_EXT_OUT_MASK_OFST 0
 #define	MC_CMD_SENSOR_INFO_EXT_OUT_MASK_LEN 4
@@ -5425,6 +5681,7 @@ 
 /*            MC_CMD_SENSOR_ENTRY_HI_OFST 8 */
 /*            MC_CMD_SENSOR_ENTRY_MINNUM 0 */
 /*            MC_CMD_SENSOR_ENTRY_MAXNUM 31 */
+/*            MC_CMD_SENSOR_ENTRY_MAXNUM_MCDI2 127 */
 
 /* MC_CMD_SENSOR_INFO_ENTRY_TYPEDEF structuredef */
 #define	MC_CMD_SENSOR_INFO_ENTRY_TYPEDEF_LEN 8
@@ -5487,6 +5744,22 @@ 
 #define	MC_CMD_READ_SENSORS_EXT_IN_LENGTH_OFST 8
 #define	MC_CMD_READ_SENSORS_EXT_IN_LENGTH_LEN 4
 
+/* MC_CMD_READ_SENSORS_EXT_IN_V2 msgrequest */
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_LEN 16
+/* DMA address of host buffer for sensor readings (must be 4Kbyte aligned). */
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_DMA_ADDR_OFST 0
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_DMA_ADDR_LEN 8
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_DMA_ADDR_LO_OFST 0
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_DMA_ADDR_HI_OFST 4
+/* Size in bytes of host buffer. */
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_LENGTH_OFST 8
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_LENGTH_LEN 4
+/* Flags controlling information retrieved */
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_FLAGS_OFST 12
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_FLAGS_LEN 4
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_ENGINEERING_LBN 0
+#define	MC_CMD_READ_SENSORS_EXT_IN_V2_ENGINEERING_WIDTH 1
+
 /* MC_CMD_READ_SENSORS_OUT msgresponse */
 #define	MC_CMD_READ_SENSORS_OUT_LEN 0
 
@@ -5594,6 +5867,7 @@ 
 /* MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN msgrequest */
 #define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LENMIN 8
 #define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LENMAX 252
+#define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LEN(num) (4+4*(num))
 #define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_PROTOCOL_OFST 0
 #define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_PROTOCOL_LEN 4
@@ -5603,6 +5877,7 @@ 
 #define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_LEN 4
 #define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_MINNUM 1
 #define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_MAXNUM 62
+#define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_MAXNUM_MCDI2 254
 
 /* MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_ARP msgrequest */
 #define	MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_ARP_LEN 14
@@ -5788,6 +6063,7 @@ 
 /* MC_CMD_GET_PHY_MEDIA_INFO_OUT msgresponse */
 #define	MC_CMD_GET_PHY_MEDIA_INFO_OUT_LENMIN 5
 #define	MC_CMD_GET_PHY_MEDIA_INFO_OUT_LENMAX 252
+#define	MC_CMD_GET_PHY_MEDIA_INFO_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_GET_PHY_MEDIA_INFO_OUT_LEN(num) (4+1*(num))
 /* in bytes */
 #define	MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATALEN_OFST 0
@@ -5796,6 +6072,7 @@ 
 #define	MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_LEN 1
 #define	MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_MINNUM 1
 #define	MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_MAXNUM 248
+#define	MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_MAXNUM_MCDI2 1016
 
 
 /***********************************/
@@ -5940,6 +6217,7 @@ 
 /* MC_CMD_NVRAM_PARTITIONS_OUT msgresponse */
 #define	MC_CMD_NVRAM_PARTITIONS_OUT_LENMIN 4
 #define	MC_CMD_NVRAM_PARTITIONS_OUT_LENMAX 252
+#define	MC_CMD_NVRAM_PARTITIONS_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_NVRAM_PARTITIONS_OUT_LEN(num) (4+4*(num))
 /* total number of partitions */
 #define	MC_CMD_NVRAM_PARTITIONS_OUT_NUM_PARTITIONS_OFST 0
@@ -5949,6 +6227,7 @@ 
 #define	MC_CMD_NVRAM_PARTITIONS_OUT_TYPE_ID_LEN 4
 #define	MC_CMD_NVRAM_PARTITIONS_OUT_TYPE_ID_MINNUM 0
 #define	MC_CMD_NVRAM_PARTITIONS_OUT_TYPE_ID_MAXNUM 62
+#define	MC_CMD_NVRAM_PARTITIONS_OUT_TYPE_ID_MAXNUM_MCDI2 254
 
 
 /***********************************/
@@ -5970,6 +6249,7 @@ 
 /* MC_CMD_NVRAM_METADATA_OUT msgresponse */
 #define	MC_CMD_NVRAM_METADATA_OUT_LENMIN 20
 #define	MC_CMD_NVRAM_METADATA_OUT_LENMAX 252
+#define	MC_CMD_NVRAM_METADATA_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_NVRAM_METADATA_OUT_LEN(num) (20+1*(num))
 /* Partition type ID code */
 #define	MC_CMD_NVRAM_METADATA_OUT_TYPE_OFST 0
@@ -6002,6 +6282,7 @@ 
 #define	MC_CMD_NVRAM_METADATA_OUT_DESCRIPTION_LEN 1
 #define	MC_CMD_NVRAM_METADATA_OUT_DESCRIPTION_MINNUM 0
 #define	MC_CMD_NVRAM_METADATA_OUT_DESCRIPTION_MAXNUM 232
+#define	MC_CMD_NVRAM_METADATA_OUT_DESCRIPTION_MAXNUM_MCDI2 1000
 
 
 /***********************************/
@@ -6034,7 +6315,10 @@ 
 
 /***********************************/
 /* MC_CMD_CLP
- * Perform a CLP related operation
+ * Perform a CLP related operation, see SF-110495-PS for details of CLP
+ * processing. This command has been extended to accomodate the requirements of
+ * different manufacturers which are to be found in SF-119187-TC, SF-119186-TC,
+ * SF-120509-TC and SF-117282-PS.
  */
 #define	MC_CMD_CLP 0x56
 #undef	MC_CMD_0x56_PRIVILEGE_CTG
@@ -6072,7 +6356,10 @@ 
 #define	MC_CMD_CLP_IN_SET_MAC_LEN 12
 /*            MC_CMD_CLP_IN_OP_OFST 0 */
 /*            MC_CMD_CLP_IN_OP_LEN 4 */
-/* MAC address assigned to port */
+/* The MAC address assigned to port. A zero MAC address of 00:00:00:00:00:00
+ * restores the permanent (factory-programmed) MAC address associated with the
+ * port. A non-zero MAC address persists until a PCIe reset or a power cycle.
+ */
 #define	MC_CMD_CLP_IN_SET_MAC_ADDR_OFST 4
 #define	MC_CMD_CLP_IN_SET_MAC_ADDR_LEN 6
 /* Padding */
@@ -6082,11 +6369,38 @@ 
 /* MC_CMD_CLP_OUT_SET_MAC msgresponse */
 #define	MC_CMD_CLP_OUT_SET_MAC_LEN 0
 
+/* MC_CMD_CLP_IN_SET_MAC_V2 msgrequest */
+#define	MC_CMD_CLP_IN_SET_MAC_V2_LEN 16
+/*            MC_CMD_CLP_IN_OP_OFST 0 */
+/*            MC_CMD_CLP_IN_OP_LEN 4 */
+/* The MAC address assigned to port. A zero MAC address of 00:00:00:00:00:00
+ * restores the permanent (factory-programmed) MAC address associated with the
+ * port. A non-zero MAC address persists until a PCIe reset or a power cycle.
+ */
+#define	MC_CMD_CLP_IN_SET_MAC_V2_ADDR_OFST 4
+#define	MC_CMD_CLP_IN_SET_MAC_V2_ADDR_LEN 6
+/* Padding */
+#define	MC_CMD_CLP_IN_SET_MAC_V2_RESERVED_OFST 10
+#define	MC_CMD_CLP_IN_SET_MAC_V2_RESERVED_LEN 2
+#define	MC_CMD_CLP_IN_SET_MAC_V2_FLAGS_OFST 12
+#define	MC_CMD_CLP_IN_SET_MAC_V2_FLAGS_LEN 4
+#define	MC_CMD_CLP_IN_SET_MAC_V2_VIRTUAL_LBN 0
+#define	MC_CMD_CLP_IN_SET_MAC_V2_VIRTUAL_WIDTH 1
+
 /* MC_CMD_CLP_IN_GET_MAC msgrequest */
 #define	MC_CMD_CLP_IN_GET_MAC_LEN 4
 /*            MC_CMD_CLP_IN_OP_OFST 0 */
 /*            MC_CMD_CLP_IN_OP_LEN 4 */
 
+/* MC_CMD_CLP_IN_GET_MAC_V2 msgrequest */
+#define	MC_CMD_CLP_IN_GET_MAC_V2_LEN 8
+/*            MC_CMD_CLP_IN_OP_OFST 0 */
+/*            MC_CMD_CLP_IN_OP_LEN 4 */
+#define	MC_CMD_CLP_IN_GET_MAC_V2_FLAGS_OFST 4
+#define	MC_CMD_CLP_IN_GET_MAC_V2_FLAGS_LEN 4
+#define	MC_CMD_CLP_IN_GET_MAC_V2_PERMANENT_LBN 0
+#define	MC_CMD_CLP_IN_GET_MAC_V2_PERMANENT_WIDTH 1
+
 /* MC_CMD_CLP_OUT_GET_MAC msgresponse */
 #define	MC_CMD_CLP_OUT_GET_MAC_LEN 8
 /* MAC address assigned to port */
@@ -6204,6 +6518,7 @@ 
 /* MC_CMD_MUM_IN_WRITE msgrequest */
 #define	MC_CMD_MUM_IN_WRITE_LENMIN 16
 #define	MC_CMD_MUM_IN_WRITE_LENMAX 252
+#define	MC_CMD_MUM_IN_WRITE_LENMAX_MCDI2 1020
 #define	MC_CMD_MUM_IN_WRITE_LEN(num) (12+4*(num))
 /* MUM cmd header */
 /*            MC_CMD_MUM_IN_CMD_OFST 0 */
@@ -6221,10 +6536,12 @@ 
 #define	MC_CMD_MUM_IN_WRITE_BUFFER_LEN 4
 #define	MC_CMD_MUM_IN_WRITE_BUFFER_MINNUM 1
 #define	MC_CMD_MUM_IN_WRITE_BUFFER_MAXNUM 60
+#define	MC_CMD_MUM_IN_WRITE_BUFFER_MAXNUM_MCDI2 252
 
 /* MC_CMD_MUM_IN_RAW_CMD msgrequest */
 #define	MC_CMD_MUM_IN_RAW_CMD_LENMIN 17
 #define	MC_CMD_MUM_IN_RAW_CMD_LENMAX 252
+#define	MC_CMD_MUM_IN_RAW_CMD_LENMAX_MCDI2 1020
 #define	MC_CMD_MUM_IN_RAW_CMD_LEN(num) (16+1*(num))
 /* MUM cmd header */
 /*            MC_CMD_MUM_IN_CMD_OFST 0 */
@@ -6243,6 +6560,7 @@ 
 #define	MC_CMD_MUM_IN_RAW_CMD_WRITE_DATA_LEN 1
 #define	MC_CMD_MUM_IN_RAW_CMD_WRITE_DATA_MINNUM 1
 #define	MC_CMD_MUM_IN_RAW_CMD_WRITE_DATA_MAXNUM 236
+#define	MC_CMD_MUM_IN_RAW_CMD_WRITE_DATA_MAXNUM_MCDI2 1004
 
 /* MC_CMD_MUM_IN_LOG msgrequest */
 #define	MC_CMD_MUM_IN_LOG_LEN 8
@@ -6529,21 +6847,25 @@ 
 /* MC_CMD_MUM_OUT_RAW_CMD msgresponse */
 #define	MC_CMD_MUM_OUT_RAW_CMD_LENMIN 1
 #define	MC_CMD_MUM_OUT_RAW_CMD_LENMAX 252
+#define	MC_CMD_MUM_OUT_RAW_CMD_LENMAX_MCDI2 1020
 #define	MC_CMD_MUM_OUT_RAW_CMD_LEN(num) (0+1*(num))
 /* returned data */
 #define	MC_CMD_MUM_OUT_RAW_CMD_DATA_OFST 0
 #define	MC_CMD_MUM_OUT_RAW_CMD_DATA_LEN 1
 #define	MC_CMD_MUM_OUT_RAW_CMD_DATA_MINNUM 1
 #define	MC_CMD_MUM_OUT_RAW_CMD_DATA_MAXNUM 252
+#define	MC_CMD_MUM_OUT_RAW_CMD_DATA_MAXNUM_MCDI2 1020
 
 /* MC_CMD_MUM_OUT_READ msgresponse */
 #define	MC_CMD_MUM_OUT_READ_LENMIN 4
 #define	MC_CMD_MUM_OUT_READ_LENMAX 252
+#define	MC_CMD_MUM_OUT_READ_LENMAX_MCDI2 1020
 #define	MC_CMD_MUM_OUT_READ_LEN(num) (0+4*(num))
 #define	MC_CMD_MUM_OUT_READ_BUFFER_OFST 0
 #define	MC_CMD_MUM_OUT_READ_BUFFER_LEN 4
 #define	MC_CMD_MUM_OUT_READ_BUFFER_MINNUM 1
 #define	MC_CMD_MUM_OUT_READ_BUFFER_MAXNUM 63
+#define	MC_CMD_MUM_OUT_READ_BUFFER_MAXNUM_MCDI2 255
 
 /* MC_CMD_MUM_OUT_WRITE msgresponse */
 #define	MC_CMD_MUM_OUT_WRITE_LEN 0
@@ -6602,11 +6924,13 @@ 
 /* MC_CMD_MUM_OUT_READ_SENSORS msgresponse */
 #define	MC_CMD_MUM_OUT_READ_SENSORS_LENMIN 4
 #define	MC_CMD_MUM_OUT_READ_SENSORS_LENMAX 252
+#define	MC_CMD_MUM_OUT_READ_SENSORS_LENMAX_MCDI2 1020
 #define	MC_CMD_MUM_OUT_READ_SENSORS_LEN(num) (0+4*(num))
 #define	MC_CMD_MUM_OUT_READ_SENSORS_DATA_OFST 0
 #define	MC_CMD_MUM_OUT_READ_SENSORS_DATA_LEN 4
 #define	MC_CMD_MUM_OUT_READ_SENSORS_DATA_MINNUM 1
 #define	MC_CMD_MUM_OUT_READ_SENSORS_DATA_MAXNUM 63
+#define	MC_CMD_MUM_OUT_READ_SENSORS_DATA_MAXNUM_MCDI2 255
 #define	MC_CMD_MUM_OUT_READ_SENSORS_READING_LBN 0
 #define	MC_CMD_MUM_OUT_READ_SENSORS_READING_WIDTH 16
 #define	MC_CMD_MUM_OUT_READ_SENSORS_STATE_LBN 16
@@ -6649,6 +6973,7 @@ 
 /* MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO msgresponse */
 #define	MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_LENMIN 5
 #define	MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_LENMAX 252
+#define	MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_LENMAX_MCDI2 1020
 #define	MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_LEN(num) (4+1*(num))
 /* in bytes */
 #define	MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATALEN_OFST 0
@@ -6657,6 +6982,7 @@ 
 #define	MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATA_LEN 1
 #define	MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATA_MINNUM 1
 #define	MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATA_MAXNUM 248
+#define	MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATA_MAXNUM_MCDI2 1016
 
 /* MC_CMD_MUM_OUT_QSFP_FILL_STATS msgresponse */
 #define	MC_CMD_MUM_OUT_QSFP_FILL_STATS_LEN 8
@@ -6673,6 +6999,7 @@ 
 /* MC_CMD_MUM_OUT_READ_DDR_INFO msgresponse */
 #define	MC_CMD_MUM_OUT_READ_DDR_INFO_LENMIN 24
 #define	MC_CMD_MUM_OUT_READ_DDR_INFO_LENMAX 248
+#define	MC_CMD_MUM_OUT_READ_DDR_INFO_LENMAX_MCDI2 1016
 #define	MC_CMD_MUM_OUT_READ_DDR_INFO_LEN(num) (8+8*(num))
 /* Discrete (soldered) DDR resistor strap info */
 #define	MC_CMD_MUM_OUT_READ_DDR_INFO_DISCRETE_DDR_INFO_OFST 0
@@ -6691,6 +7018,7 @@ 
 #define	MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_HI_OFST 12
 #define	MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_MINNUM 2
 #define	MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_MAXNUM 30
+#define	MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_MAXNUM_MCDI2 126
 #define	MC_CMD_MUM_OUT_READ_DDR_INFO_BANK_ID_LBN 0
 #define	MC_CMD_MUM_OUT_READ_DDR_INFO_BANK_ID_WIDTH 8
 /* enum: SODIMM bank 1 (Top SODIMM for Sorrento) */
@@ -6893,6 +7221,14 @@ 
  * subset of the information stored in this partition.
  */
 #define	NVRAM_PARTITION_TYPE_FRU_INFORMATION 0x1d00
+/* enum: Bundle image partition */
+#define	NVRAM_PARTITION_TYPE_BUNDLE 0x1e00
+/* enum: Bundle metadata partition that holds additional information related to
+ * a bundle update in TLV format
+ */
+#define	NVRAM_PARTITION_TYPE_BUNDLE_METADATA 0x1e01
+/* enum: Bundle update non-volatile log output partition */
+#define	NVRAM_PARTITION_TYPE_BUNDLE_LOG 0x1e02
 /* enum: Start of reserved value range (firmware may use for any purpose) */
 #define	NVRAM_PARTITION_TYPE_RESERVED_VALUES_MIN 0xff00
 /* enum: End of reserved value range (firmware may use for any purpose) */
@@ -7191,6 +7527,7 @@ 
 /* MC_CMD_INIT_EVQ_IN msgrequest */
 #define	MC_CMD_INIT_EVQ_IN_LENMIN 44
 #define	MC_CMD_INIT_EVQ_IN_LENMAX 548
+#define	MC_CMD_INIT_EVQ_IN_LENMAX_MCDI2 548
 #define	MC_CMD_INIT_EVQ_IN_LEN(num) (36+8*(num))
 /* Size, in entries */
 #define	MC_CMD_INIT_EVQ_IN_SIZE_OFST 0
@@ -7264,6 +7601,7 @@ 
 #define	MC_CMD_INIT_EVQ_IN_DMA_ADDR_HI_OFST 40
 #define	MC_CMD_INIT_EVQ_IN_DMA_ADDR_MINNUM 1
 #define	MC_CMD_INIT_EVQ_IN_DMA_ADDR_MAXNUM 64
+#define	MC_CMD_INIT_EVQ_IN_DMA_ADDR_MAXNUM_MCDI2 64
 
 /* MC_CMD_INIT_EVQ_OUT msgresponse */
 #define	MC_CMD_INIT_EVQ_OUT_LEN 4
@@ -7274,6 +7612,7 @@ 
 /* MC_CMD_INIT_EVQ_V2_IN msgrequest */
 #define	MC_CMD_INIT_EVQ_V2_IN_LENMIN 44
 #define	MC_CMD_INIT_EVQ_V2_IN_LENMAX 548
+#define	MC_CMD_INIT_EVQ_V2_IN_LENMAX_MCDI2 548
 #define	MC_CMD_INIT_EVQ_V2_IN_LEN(num) (36+8*(num))
 /* Size, in entries */
 #define	MC_CMD_INIT_EVQ_V2_IN_SIZE_OFST 0
@@ -7368,6 +7707,7 @@ 
 #define	MC_CMD_INIT_EVQ_V2_IN_DMA_ADDR_HI_OFST 40
 #define	MC_CMD_INIT_EVQ_V2_IN_DMA_ADDR_MINNUM 1
 #define	MC_CMD_INIT_EVQ_V2_IN_DMA_ADDR_MAXNUM 64
+#define	MC_CMD_INIT_EVQ_V2_IN_DMA_ADDR_MAXNUM_MCDI2 64
 
 /* MC_CMD_INIT_EVQ_V2_OUT msgresponse */
 #define	MC_CMD_INIT_EVQ_V2_OUT_LEN 8
@@ -7422,6 +7762,7 @@ 
  */
 #define	MC_CMD_INIT_RXQ_IN_LENMIN 36
 #define	MC_CMD_INIT_RXQ_IN_LENMAX 252
+#define	MC_CMD_INIT_RXQ_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_INIT_RXQ_IN_LEN(num) (28+8*(num))
 /* Size, in entries */
 #define	MC_CMD_INIT_RXQ_IN_SIZE_OFST 0
@@ -7470,6 +7811,7 @@ 
 #define	MC_CMD_INIT_RXQ_IN_DMA_ADDR_HI_OFST 32
 #define	MC_CMD_INIT_RXQ_IN_DMA_ADDR_MINNUM 1
 #define	MC_CMD_INIT_RXQ_IN_DMA_ADDR_MAXNUM 28
+#define	MC_CMD_INIT_RXQ_IN_DMA_ADDR_MAXNUM_MCDI2 124
 
 /* MC_CMD_INIT_RXQ_EXT_IN msgrequest: Extended RXQ_INIT with additional mode
  * flags
@@ -7539,6 +7881,8 @@ 
 #define	MC_CMD_INIT_RXQ_EXT_IN_FLAG_WANT_OUTER_CLASSES_WIDTH 1
 #define	MC_CMD_INIT_RXQ_EXT_IN_FLAG_FORCE_EV_MERGING_LBN 19
 #define	MC_CMD_INIT_RXQ_EXT_IN_FLAG_FORCE_EV_MERGING_WIDTH 1
+#define	MC_CMD_INIT_RXQ_EXT_IN_FLAG_NO_CONT_EV_LBN 20
+#define	MC_CMD_INIT_RXQ_EXT_IN_FLAG_NO_CONT_EV_WIDTH 1
 /* Owner ID to use if in buffer mode (zero if physical) */
 #define	MC_CMD_INIT_RXQ_EXT_IN_OWNER_ID_OFST 20
 #define	MC_CMD_INIT_RXQ_EXT_IN_OWNER_ID_LEN 4
@@ -7621,6 +7965,8 @@ 
 #define	MC_CMD_INIT_RXQ_V3_IN_FLAG_WANT_OUTER_CLASSES_WIDTH 1
 #define	MC_CMD_INIT_RXQ_V3_IN_FLAG_FORCE_EV_MERGING_LBN 19
 #define	MC_CMD_INIT_RXQ_V3_IN_FLAG_FORCE_EV_MERGING_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_NO_CONT_EV_LBN 20
+#define	MC_CMD_INIT_RXQ_V3_IN_FLAG_NO_CONT_EV_WIDTH 1
 /* Owner ID to use if in buffer mode (zero if physical) */
 #define	MC_CMD_INIT_RXQ_V3_IN_OWNER_ID_OFST 20
 #define	MC_CMD_INIT_RXQ_V3_IN_OWNER_ID_LEN 4
@@ -7664,6 +8010,132 @@ 
 #define	MC_CMD_INIT_RXQ_V3_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_OFST 556
 #define	MC_CMD_INIT_RXQ_V3_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_LEN 4
 
+/* MC_CMD_INIT_RXQ_V4_IN msgrequest: INIT_RXQ request with new field required
+ * for systems with a QDMA (currently, Riverhead)
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_LEN 564
+/* Size, in entries */
+#define	MC_CMD_INIT_RXQ_V4_IN_SIZE_OFST 0
+#define	MC_CMD_INIT_RXQ_V4_IN_SIZE_LEN 4
+/* The EVQ to send events to. This is an index originally specified to
+ * INIT_EVQ. If DMA_MODE == PACKED_STREAM this must be equal to INSTANCE.
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_TARGET_EVQ_OFST 4
+#define	MC_CMD_INIT_RXQ_V4_IN_TARGET_EVQ_LEN 4
+/* The value to put in the event data. Check hardware spec. for valid range.
+ * This field is ignored if DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER or DMA_MODE
+ * == PACKED_STREAM.
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_LABEL_OFST 8
+#define	MC_CMD_INIT_RXQ_V4_IN_LABEL_LEN 4
+/* Desired instance. Must be set to a specific instance, which is a function
+ * local queue index.
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_INSTANCE_OFST 12
+#define	MC_CMD_INIT_RXQ_V4_IN_INSTANCE_LEN 4
+/* There will be more flags here. */
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAGS_OFST 16
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAGS_LEN 4
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_BUFF_MODE_LBN 0
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_BUFF_MODE_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_HDR_SPLIT_LBN 1
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_HDR_SPLIT_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_TIMESTAMP_LBN 2
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_TIMESTAMP_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V4_IN_CRC_MODE_LBN 3
+#define	MC_CMD_INIT_RXQ_V4_IN_CRC_MODE_WIDTH 4
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_CHAIN_LBN 7
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_CHAIN_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_PREFIX_LBN 8
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_PREFIX_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_DISABLE_SCATTER_LBN 9
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_DISABLE_SCATTER_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V4_IN_DMA_MODE_LBN 10
+#define	MC_CMD_INIT_RXQ_V4_IN_DMA_MODE_WIDTH 4
+/* enum: One packet per descriptor (for normal networking) */
+#define	MC_CMD_INIT_RXQ_V4_IN_SINGLE_PACKET 0x0
+/* enum: Pack multiple packets into large descriptors (for SolarCapture) */
+#define	MC_CMD_INIT_RXQ_V4_IN_PACKED_STREAM 0x1
+/* enum: Pack multiple packets into large descriptors using the format designed
+ * to maximise packet rate. This mode uses 1 "bucket" per descriptor with
+ * multiple fixed-size packet buffers within each bucket. For a full
+ * description see SF-119419-TC. This mode is only supported by "dpdk" datapath
+ * firmware.
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_EQUAL_STRIDE_SUPER_BUFFER 0x2
+/* enum: Deprecated name for EQUAL_STRIDE_SUPER_BUFFER. */
+#define	MC_CMD_INIT_RXQ_V4_IN_EQUAL_STRIDE_PACKED_STREAM 0x2
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_SNAPSHOT_MODE_LBN 14
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_SNAPSHOT_MODE_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V4_IN_PACKED_STREAM_BUFF_SIZE_LBN 15
+#define	MC_CMD_INIT_RXQ_V4_IN_PACKED_STREAM_BUFF_SIZE_WIDTH 3
+#define	MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_1M 0x0 /* enum */
+#define	MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_512K 0x1 /* enum */
+#define	MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_256K 0x2 /* enum */
+#define	MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_128K 0x3 /* enum */
+#define	MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_64K 0x4 /* enum */
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_WANT_OUTER_CLASSES_LBN 18
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_WANT_OUTER_CLASSES_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_FORCE_EV_MERGING_LBN 19
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_FORCE_EV_MERGING_WIDTH 1
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_NO_CONT_EV_LBN 20
+#define	MC_CMD_INIT_RXQ_V4_IN_FLAG_NO_CONT_EV_WIDTH 1
+/* Owner ID to use if in buffer mode (zero if physical) */
+#define	MC_CMD_INIT_RXQ_V4_IN_OWNER_ID_OFST 20
+#define	MC_CMD_INIT_RXQ_V4_IN_OWNER_ID_LEN 4
+/* The port ID associated with the v-adaptor which should contain this DMAQ. */
+#define	MC_CMD_INIT_RXQ_V4_IN_PORT_ID_OFST 24
+#define	MC_CMD_INIT_RXQ_V4_IN_PORT_ID_LEN 4
+/* 64-bit address of 4k of 4k-aligned host memory buffer */
+#define	MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_OFST 28
+#define	MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_LEN 8
+#define	MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_LO_OFST 28
+#define	MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_HI_OFST 32
+#define	MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_NUM 64
+/* Maximum length of packet to receive, if SNAPSHOT_MODE flag is set */
+#define	MC_CMD_INIT_RXQ_V4_IN_SNAPSHOT_LENGTH_OFST 540
+#define	MC_CMD_INIT_RXQ_V4_IN_SNAPSHOT_LENGTH_LEN 4
+/* The number of packet buffers that will be contained within each
+ * EQUAL_STRIDE_SUPER_BUFFER format bucket supplied by the driver. This field
+ * is ignored unless DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER.
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_ES_PACKET_BUFFERS_PER_BUCKET_OFST 544
+#define	MC_CMD_INIT_RXQ_V4_IN_ES_PACKET_BUFFERS_PER_BUCKET_LEN 4
+/* The length in bytes of the area in each packet buffer that can be written to
+ * by the adapter. This is used to store the packet prefix and the packet
+ * payload. This length does not include any end padding added by the driver.
+ * This field is ignored unless DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER.
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_ES_MAX_DMA_LEN_OFST 548
+#define	MC_CMD_INIT_RXQ_V4_IN_ES_MAX_DMA_LEN_LEN 4
+/* The length in bytes of a single packet buffer within a
+ * EQUAL_STRIDE_SUPER_BUFFER format bucket. This field is ignored unless
+ * DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER.
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_ES_PACKET_STRIDE_OFST 552
+#define	MC_CMD_INIT_RXQ_V4_IN_ES_PACKET_STRIDE_LEN 4
+/* The maximum time in nanoseconds that the datapath will be backpressured if
+ * there are no RX descriptors available. If the timeout is reached and there
+ * are still no descriptors then the packet will be dropped. A timeout of 0
+ * means the datapath will never be blocked. This field is ignored unless
+ * DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER.
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_OFST 556
+#define	MC_CMD_INIT_RXQ_V4_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_LEN 4
+/* V4 message data */
+#define	MC_CMD_INIT_RXQ_V4_IN_V4_DATA_OFST 560
+#define	MC_CMD_INIT_RXQ_V4_IN_V4_DATA_LEN 4
+/* Size in bytes of buffers attached to descriptors posted to this queue. Set
+ * to zero if using this message on non-QDMA based platforms. Currently in
+ * Riverhead there is a global limit of eight different buffer sizes across all
+ * active queues. A 2KB and 4KB buffer is guaranteed to be available, but a
+ * request for a different buffer size will fail if there are already eight
+ * other buffer sizes in use. In future Riverhead this limit will go away and
+ * any size will be accepted.
+ */
+#define	MC_CMD_INIT_RXQ_V4_IN_BUFFER_SIZE_BYTES_OFST 560
+#define	MC_CMD_INIT_RXQ_V4_IN_BUFFER_SIZE_BYTES_LEN 4
+
 /* MC_CMD_INIT_RXQ_OUT msgresponse */
 #define	MC_CMD_INIT_RXQ_OUT_LEN 0
 
@@ -7673,6 +8145,9 @@ 
 /* MC_CMD_INIT_RXQ_V3_OUT msgresponse */
 #define	MC_CMD_INIT_RXQ_V3_OUT_LEN 0
 
+/* MC_CMD_INIT_RXQ_V4_OUT msgresponse */
+#define	MC_CMD_INIT_RXQ_V4_OUT_LEN 0
+
 
 /***********************************/
 /* MC_CMD_INIT_TXQ
@@ -7687,6 +8162,7 @@ 
  */
 #define	MC_CMD_INIT_TXQ_IN_LENMIN 36
 #define	MC_CMD_INIT_TXQ_IN_LENMAX 252
+#define	MC_CMD_INIT_TXQ_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_INIT_TXQ_IN_LEN(num) (28+8*(num))
 /* Size, in entries */
 #define	MC_CMD_INIT_TXQ_IN_SIZE_OFST 0
@@ -7738,6 +8214,7 @@ 
 #define	MC_CMD_INIT_TXQ_IN_DMA_ADDR_HI_OFST 32
 #define	MC_CMD_INIT_TXQ_IN_DMA_ADDR_MINNUM 1
 #define	MC_CMD_INIT_TXQ_IN_DMA_ADDR_MAXNUM 28
+#define	MC_CMD_INIT_TXQ_IN_DMA_ADDR_MAXNUM_MCDI2 124
 
 /* MC_CMD_INIT_TXQ_EXT_IN msgrequest: Extended INIT_TXQ with additional mode
  * flags
@@ -7799,6 +8276,7 @@ 
 #define	MC_CMD_INIT_TXQ_EXT_IN_DMA_ADDR_HI_OFST 32
 #define	MC_CMD_INIT_TXQ_EXT_IN_DMA_ADDR_MINNUM 1
 #define	MC_CMD_INIT_TXQ_EXT_IN_DMA_ADDR_MAXNUM 64
+#define	MC_CMD_INIT_TXQ_EXT_IN_DMA_ADDR_MAXNUM_MCDI2 64
 /* Flags related to Qbb flow control mode. */
 #define	MC_CMD_INIT_TXQ_EXT_IN_QBB_FLAGS_OFST 540
 #define	MC_CMD_INIT_TXQ_EXT_IN_QBB_FLAGS_LEN 4
@@ -8153,6 +8631,7 @@ 
 /* MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN msgrequest */
 #define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_LENMIN 20
 #define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_LENMAX 268
+#define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_LENMAX_MCDI2 268
 #define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_LEN(num) (12+8*(num))
 #define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_HANDLE_OFST 0
 #define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_HANDLE_LEN 4
@@ -8169,6 +8648,7 @@ 
 #define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_ENTRY_HI_OFST 16
 #define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_ENTRY_MINNUM 1
 #define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_ENTRY_MAXNUM 32
+#define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_ENTRY_MAXNUM_MCDI2 32
 
 /* MC_CMD_PROGRAM_BUFTBL_ENTRIES_OUT msgresponse */
 #define	MC_CMD_PROGRAM_BUFTBL_ENTRIES_OUT_LEN 0
@@ -8931,6 +9411,7 @@ 
 /* MC_CMD_GET_PARSER_DISP_INFO_OUT msgresponse */
 #define	MC_CMD_GET_PARSER_DISP_INFO_OUT_LENMIN 8
 #define	MC_CMD_GET_PARSER_DISP_INFO_OUT_LENMAX 252
+#define	MC_CMD_GET_PARSER_DISP_INFO_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_GET_PARSER_DISP_INFO_OUT_LEN(num) (8+4*(num))
 /* identifies the type of operation requested */
 #define	MC_CMD_GET_PARSER_DISP_INFO_OUT_OP_OFST 0
@@ -8947,6 +9428,7 @@ 
 #define	MC_CMD_GET_PARSER_DISP_INFO_OUT_SUPPORTED_MATCHES_LEN 4
 #define	MC_CMD_GET_PARSER_DISP_INFO_OUT_SUPPORTED_MATCHES_MINNUM 0
 #define	MC_CMD_GET_PARSER_DISP_INFO_OUT_SUPPORTED_MATCHES_MAXNUM 61
+#define	MC_CMD_GET_PARSER_DISP_INFO_OUT_SUPPORTED_MATCHES_MAXNUM_MCDI2 253
 
 /* MC_CMD_GET_PARSER_DISP_RESTRICTIONS_OUT msgresponse */
 #define	MC_CMD_GET_PARSER_DISP_RESTRICTIONS_OUT_LEN 8
@@ -9708,6 +10190,7 @@ 
  */
 #define	MC_CMD_SATELLITE_DOWNLOAD_IN_LENMIN 20
 #define	MC_CMD_SATELLITE_DOWNLOAD_IN_LENMAX 252
+#define	MC_CMD_SATELLITE_DOWNLOAD_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_SATELLITE_DOWNLOAD_IN_LEN(num) (16+4*(num))
 /* Download phase. (Note: the IDLE phase is used internally and is never valid
  * in a command from the host.)
@@ -9773,6 +10256,7 @@ 
 #define	MC_CMD_SATELLITE_DOWNLOAD_IN_CHUNK_DATA_LEN 4
 #define	MC_CMD_SATELLITE_DOWNLOAD_IN_CHUNK_DATA_MINNUM 1
 #define	MC_CMD_SATELLITE_DOWNLOAD_IN_CHUNK_DATA_MAXNUM 59
+#define	MC_CMD_SATELLITE_DOWNLOAD_IN_CHUNK_DATA_MAXNUM_MCDI2 251
 
 /* MC_CMD_SATELLITE_DOWNLOAD_OUT msgresponse */
 #define	MC_CMD_SATELLITE_DOWNLOAD_OUT_LEN 8
@@ -9948,6 +10432,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: RX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: RX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -9994,6 +10481,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: TX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: TX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -10162,6 +10652,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: RX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: RX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -10208,6 +10701,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: TX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: TX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -10296,6 +10792,12 @@ 
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_VI_SPREADING_WIDTH 1
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXDP_HLB_IDLE_LBN 25
 #define	MC_CMD_GET_CAPABILITIES_V2_OUT_RXDP_HLB_IDLE_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_INIT_RXQ_NO_CONT_EV_LBN 26
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_INIT_RXQ_NO_CONT_EV_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_INIT_RXQ_WITH_BUFFER_SIZE_LBN 27
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_INIT_RXQ_WITH_BUFFER_SIZE_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_BUNDLE_UPDATE_LBN 28
+#define	MC_CMD_GET_CAPABILITIES_V2_OUT_BUNDLE_UPDATE_WIDTH 1
 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present
  * on older firmware (check the length).
  */
@@ -10485,6 +10987,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: RX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: RX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -10531,6 +11036,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: TX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: TX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -10619,6 +11127,12 @@ 
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_VI_SPREADING_WIDTH 1
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXDP_HLB_IDLE_LBN 25
 #define	MC_CMD_GET_CAPABILITIES_V3_OUT_RXDP_HLB_IDLE_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_INIT_RXQ_NO_CONT_EV_LBN 26
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_INIT_RXQ_NO_CONT_EV_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_INIT_RXQ_WITH_BUFFER_SIZE_LBN 27
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_INIT_RXQ_WITH_BUFFER_SIZE_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_BUNDLE_UPDATE_LBN 28
+#define	MC_CMD_GET_CAPABILITIES_V3_OUT_BUNDLE_UPDATE_WIDTH 1
 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present
  * on older firmware (check the length).
  */
@@ -10833,6 +11347,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: RX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: RX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -10879,6 +11396,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: TX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: TX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -10967,6 +11487,12 @@ 
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_VI_SPREADING_WIDTH 1
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXDP_HLB_IDLE_LBN 25
 #define	MC_CMD_GET_CAPABILITIES_V4_OUT_RXDP_HLB_IDLE_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_INIT_RXQ_NO_CONT_EV_LBN 26
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_INIT_RXQ_NO_CONT_EV_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_INIT_RXQ_WITH_BUFFER_SIZE_LBN 27
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_INIT_RXQ_WITH_BUFFER_SIZE_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_BUNDLE_UPDATE_LBN 28
+#define	MC_CMD_GET_CAPABILITIES_V4_OUT_BUNDLE_UPDATE_WIDTH 1
 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present
  * on older firmware (check the length).
  */
@@ -11189,6 +11715,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_V5_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: RX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_V5_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: RX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -11235,6 +11764,9 @@ 
  * development only)
  */
 #define	MC_CMD_GET_CAPABILITIES_V5_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1
+/* enum: TX PD firmware for telemetry prototyping (Medford2 development only)
+ */
+#define	MC_CMD_GET_CAPABILITIES_V5_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1
 /* enum: TX PD firmware with approximately Siena-compatible behaviour
  * (Huntington development only)
  */
@@ -11323,6 +11855,12 @@ 
 #define	MC_CMD_GET_CAPABILITIES_V5_OUT_VI_SPREADING_WIDTH 1
 #define	MC_CMD_GET_CAPABILITIES_V5_OUT_RXDP_HLB_IDLE_LBN 25
 #define	MC_CMD_GET_CAPABILITIES_V5_OUT_RXDP_HLB_IDLE_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V5_OUT_INIT_RXQ_NO_CONT_EV_LBN 26
+#define	MC_CMD_GET_CAPABILITIES_V5_OUT_INIT_RXQ_NO_CONT_EV_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V5_OUT_INIT_RXQ_WITH_BUFFER_SIZE_LBN 27
+#define	MC_CMD_GET_CAPABILITIES_V5_OUT_INIT_RXQ_WITH_BUFFER_SIZE_WIDTH 1
+#define	MC_CMD_GET_CAPABILITIES_V5_OUT_BUNDLE_UPDATE_LBN 28
+#define	MC_CMD_GET_CAPABILITIES_V5_OUT_BUNDLE_UPDATE_WIDTH 1
 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present
  * on older firmware (check the length).
  */
@@ -12531,6 +13069,7 @@ 
 /* MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT msgresponse */
 #define	MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LENMIN 4
 #define	MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LENMAX 250
+#define	MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LENMAX_MCDI2 1018
 #define	MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LEN(num) (4+6*(num))
 /* The number of MAC addresses returned */
 #define	MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_COUNT_OFST 0
@@ -12540,6 +13079,7 @@ 
 #define	MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_LEN 6
 #define	MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_MINNUM 0
 #define	MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_MAXNUM 41
+#define	MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_MAXNUM_MCDI2 169
 
 
 /***********************************/
@@ -12645,12 +13185,14 @@ 
 /* MC_CMD_DUMP_BUFTBL_ENTRIES_OUT msgresponse */
 #define	MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LENMIN 12
 #define	MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LENMAX 252
+#define	MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LEN(num) (0+12*(num))
 /* Raw buffer table entries, layed out as BUFTBL_ENTRY. */
 #define	MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_OFST 0
 #define	MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_LEN 12
 #define	MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_MINNUM 1
 #define	MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_MAXNUM 21
+#define	MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_MAXNUM_MCDI2 85
 
 
 /***********************************/
@@ -12979,6 +13521,7 @@ 
 /* MC_CMD_CAP_BLK_READ_OUT msgresponse */
 #define	MC_CMD_CAP_BLK_READ_OUT_LENMIN 8
 #define	MC_CMD_CAP_BLK_READ_OUT_LENMAX 248
+#define	MC_CMD_CAP_BLK_READ_OUT_LENMAX_MCDI2 1016
 #define	MC_CMD_CAP_BLK_READ_OUT_LEN(num) (0+8*(num))
 #define	MC_CMD_CAP_BLK_READ_OUT_BUFFER_OFST 0
 #define	MC_CMD_CAP_BLK_READ_OUT_BUFFER_LEN 8
@@ -12986,6 +13529,7 @@ 
 #define	MC_CMD_CAP_BLK_READ_OUT_BUFFER_HI_OFST 4
 #define	MC_CMD_CAP_BLK_READ_OUT_BUFFER_MINNUM 1
 #define	MC_CMD_CAP_BLK_READ_OUT_BUFFER_MAXNUM 31
+#define	MC_CMD_CAP_BLK_READ_OUT_BUFFER_MAXNUM_MCDI2 127
 
 
 /***********************************/
@@ -13215,6 +13759,7 @@ 
 /* MC_CMD_UART_SEND_DATA_OUT msgrequest */
 #define	MC_CMD_UART_SEND_DATA_OUT_LENMIN 16
 #define	MC_CMD_UART_SEND_DATA_OUT_LENMAX 252
+#define	MC_CMD_UART_SEND_DATA_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_UART_SEND_DATA_OUT_LEN(num) (16+1*(num))
 /* CRC32 over OFFSET, LENGTH, RESERVED, DATA */
 #define	MC_CMD_UART_SEND_DATA_OUT_CHECKSUM_OFST 0
@@ -13232,6 +13777,7 @@ 
 #define	MC_CMD_UART_SEND_DATA_OUT_DATA_LEN 1
 #define	MC_CMD_UART_SEND_DATA_OUT_DATA_MINNUM 0
 #define	MC_CMD_UART_SEND_DATA_OUT_DATA_MAXNUM 236
+#define	MC_CMD_UART_SEND_DATA_OUT_DATA_MAXNUM_MCDI2 1004
 
 /* MC_CMD_UART_SEND_DATA_IN msgresponse */
 #define	MC_CMD_UART_SEND_DATA_IN_LEN 0
@@ -13265,6 +13811,7 @@ 
 /* MC_CMD_UART_RECV_DATA_IN msgresponse */
 #define	MC_CMD_UART_RECV_DATA_IN_LENMIN 16
 #define	MC_CMD_UART_RECV_DATA_IN_LENMAX 252
+#define	MC_CMD_UART_RECV_DATA_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_UART_RECV_DATA_IN_LEN(num) (16+1*(num))
 /* CRC32 over RESERVED1, RESERVED2, RESERVED3, DATA */
 #define	MC_CMD_UART_RECV_DATA_IN_CHECKSUM_OFST 0
@@ -13282,6 +13829,7 @@ 
 #define	MC_CMD_UART_RECV_DATA_IN_DATA_LEN 1
 #define	MC_CMD_UART_RECV_DATA_IN_DATA_MINNUM 0
 #define	MC_CMD_UART_RECV_DATA_IN_DATA_MAXNUM 236
+#define	MC_CMD_UART_RECV_DATA_IN_DATA_MAXNUM_MCDI2 1004
 
 
 /***********************************/
@@ -13305,6 +13853,7 @@ 
 /* MC_CMD_READ_FUSES_OUT msgresponse */
 #define	MC_CMD_READ_FUSES_OUT_LENMIN 4
 #define	MC_CMD_READ_FUSES_OUT_LENMAX 252
+#define	MC_CMD_READ_FUSES_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_READ_FUSES_OUT_LEN(num) (4+1*(num))
 /* Length of returned OTP data in bytes */
 #define	MC_CMD_READ_FUSES_OUT_LENGTH_OFST 0
@@ -13314,6 +13863,7 @@ 
 #define	MC_CMD_READ_FUSES_OUT_DATA_LEN 1
 #define	MC_CMD_READ_FUSES_OUT_DATA_MINNUM 0
 #define	MC_CMD_READ_FUSES_OUT_DATA_MAXNUM 248
+#define	MC_CMD_READ_FUSES_OUT_DATA_MAXNUM_MCDI2 1016
 
 
 /***********************************/
@@ -13328,6 +13878,7 @@ 
 /* MC_CMD_KR_TUNE_IN msgrequest */
 #define	MC_CMD_KR_TUNE_IN_LENMIN 4
 #define	MC_CMD_KR_TUNE_IN_LENMAX 252
+#define	MC_CMD_KR_TUNE_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_KR_TUNE_IN_LEN(num) (4+4*(num))
 /* Requested operation */
 #define	MC_CMD_KR_TUNE_IN_KR_TUNE_OP_OFST 0
@@ -13365,6 +13916,7 @@ 
 #define	MC_CMD_KR_TUNE_IN_KR_TUNE_ARGS_LEN 4
 #define	MC_CMD_KR_TUNE_IN_KR_TUNE_ARGS_MINNUM 0
 #define	MC_CMD_KR_TUNE_IN_KR_TUNE_ARGS_MAXNUM 62
+#define	MC_CMD_KR_TUNE_IN_KR_TUNE_ARGS_MAXNUM_MCDI2 254
 
 /* MC_CMD_KR_TUNE_OUT msgresponse */
 #define	MC_CMD_KR_TUNE_OUT_LEN 0
@@ -13381,12 +13933,14 @@ 
 /* MC_CMD_KR_TUNE_RXEQ_GET_OUT msgresponse */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_LENMIN 4
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_LENMAX 252
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_LEN(num) (0+4*(num))
 /* RXEQ Parameter */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_OFST 0
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_LEN 4
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_MINNUM 1
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_MAXNUM 63
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_MAXNUM_MCDI2 255
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_ID_LBN 0
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_ID_WIDTH 8
 /* enum: Attenuation (0-15, Huntington) */
@@ -13475,6 +14029,44 @@ 
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_CDR_PVT 0x20
 /* enum: CDR integral loop code (Medford2) */
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_CDR_INTEG 0x21
+/* enum: CTLE Boost stages - retimer lineside (Medford2 with DS250x retimer - 4
+ * stages, 2 bits per stage)
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_BOOST_RT_LS 0x22
+/* enum: DFE Tap1 - retimer lineside (Medford2 with DS250x retimer (-31 - 31))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP1_RT_LS 0x23
+/* enum: DFE Tap2 - retimer lineside (Medford2 with DS250x retimer (-15 - 15))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP2_RT_LS 0x24
+/* enum: DFE Tap3 - retimer lineside (Medford2 with DS250x retimer (-15 - 15))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP3_RT_LS 0x25
+/* enum: DFE Tap4 - retimer lineside (Medford2 with DS250x retimer (-15 - 15))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP4_RT_LS 0x26
+/* enum: DFE Tap5 - retimer lineside (Medford2 with DS250x retimer (-15 - 15))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP5_RT_LS 0x27
+/* enum: CTLE Boost stages - retimer hostside (Medford2 with DS250x retimer - 4
+ * stages, 2 bits per stage)
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_BOOST_RT_HS 0x28
+/* enum: DFE Tap1 - retimer hostside (Medford2 with DS250x retimer (-31 - 31))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP1_RT_HS 0x29
+/* enum: DFE Tap2 - retimer hostside (Medford2 with DS250x retimer (-15 - 15))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP2_RT_HS 0x2a
+/* enum: DFE Tap3 - retimer hostside (Medford2 with DS250x retimer (-15 - 15))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP3_RT_HS 0x2b
+/* enum: DFE Tap4 - retimer hostside (Medford2 with DS250x retimer (-15 - 15))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP4_RT_HS 0x2c
+/* enum: DFE Tap5 - retimer hostside (Medford2 with DS250x retimer (-15 - 15))
+ */
+#define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP5_RT_HS 0x2d
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_LANE_LBN 8
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_LANE_WIDTH 3
 #define	MC_CMD_KR_TUNE_RXEQ_GET_OUT_LANE_0 0x0 /* enum */
@@ -13494,6 +14086,7 @@ 
 /* MC_CMD_KR_TUNE_RXEQ_SET_IN msgrequest */
 #define	MC_CMD_KR_TUNE_RXEQ_SET_IN_LENMIN 8
 #define	MC_CMD_KR_TUNE_RXEQ_SET_IN_LENMAX 252
+#define	MC_CMD_KR_TUNE_RXEQ_SET_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_KR_TUNE_RXEQ_SET_IN_LEN(num) (4+4*(num))
 /* Requested operation */
 #define	MC_CMD_KR_TUNE_RXEQ_SET_IN_KR_TUNE_OP_OFST 0
@@ -13506,6 +14099,7 @@ 
 #define	MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_LEN 4
 #define	MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_MINNUM 1
 #define	MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_MAXNUM 62
+#define	MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_MAXNUM_MCDI2 254
 #define	MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_ID_LBN 0
 #define	MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_ID_WIDTH 8
 /*             Enum values, see field(s): */
@@ -13538,12 +14132,14 @@ 
 /* MC_CMD_KR_TUNE_TXEQ_GET_OUT msgresponse */
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_LENMIN 4
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_LENMAX 252
+#define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_LEN(num) (0+4*(num))
 /* TXEQ Parameter */
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_OFST 0
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_LEN 4
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_MINNUM 1
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_MAXNUM 63
+#define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_MAXNUM_MCDI2 255
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_ID_LBN 0
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_ID_WIDTH 8
 /* enum: TX Amplitude (Huntington, Medford, Medford2) */
@@ -13568,10 +14164,22 @@ 
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TX_RT_SET 0x9
 /* enum: TX Amplitude Fine control (Medford) */
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TX_LEV_FINE 0xa
-/* enum: Pre-shoot Tap (Medford, Medford2) */
+/* enum: Pre-cursor Tap (Medford, Medford2) */
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_ADV 0xb
-/* enum: De-emphasis Tap (Medford, Medford2) */
+/* enum: Post-cursor Tap (Medford, Medford2) */
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_DLY 0xc
+/* enum: TX Amplitude (Retimer Lineside) */
+#define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TX_LEV_RT_LS 0xd
+/* enum: Pre-cursor Tap (Retimer Lineside) */
+#define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_ADV_RT_LS 0xe
+/* enum: Post-cursor Tap (Retimer Lineside) */
+#define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_DLY_RT_LS 0xf
+/* enum: TX Amplitude (Retimer Hostside) */
+#define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TX_LEV_RT_HS 0x10
+/* enum: Pre-cursor Tap (Retimer Hostside) */
+#define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_ADV_RT_HS 0x11
+/* enum: Post-cursor Tap (Retimer Hostside) */
+#define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_DLY_RT_HS 0x12
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_LANE_LBN 8
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_LANE_WIDTH 3
 #define	MC_CMD_KR_TUNE_TXEQ_GET_OUT_LANE_0 0x0 /* enum */
@@ -13589,6 +14197,7 @@ 
 /* MC_CMD_KR_TUNE_TXEQ_SET_IN msgrequest */
 #define	MC_CMD_KR_TUNE_TXEQ_SET_IN_LENMIN 8
 #define	MC_CMD_KR_TUNE_TXEQ_SET_IN_LENMAX 252
+#define	MC_CMD_KR_TUNE_TXEQ_SET_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_KR_TUNE_TXEQ_SET_IN_LEN(num) (4+4*(num))
 /* Requested operation */
 #define	MC_CMD_KR_TUNE_TXEQ_SET_IN_KR_TUNE_OP_OFST 0
@@ -13601,6 +14210,7 @@ 
 #define	MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_LEN 4
 #define	MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_MINNUM 1
 #define	MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_MAXNUM 62
+#define	MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_MAXNUM_MCDI2 254
 #define	MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_ID_LBN 0
 #define	MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_ID_WIDTH 8
 /*             Enum values, see field(s): */
@@ -13676,11 +14286,13 @@ 
 /* MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT msgresponse */
 #define	MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_LENMIN 0
 #define	MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_LENMAX 252
+#define	MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_LEN(num) (0+2*(num))
 #define	MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_OFST 0
 #define	MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_LEN 2
 #define	MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MINNUM 0
 #define	MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MAXNUM 126
+#define	MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MAXNUM_MCDI2 510
 
 /* MC_CMD_KR_TUNE_READ_FOM_IN msgrequest */
 #define	MC_CMD_KR_TUNE_READ_FOM_IN_LEN 8
@@ -13790,6 +14402,7 @@ 
 /* MC_CMD_PCIE_TUNE_IN msgrequest */
 #define	MC_CMD_PCIE_TUNE_IN_LENMIN 4
 #define	MC_CMD_PCIE_TUNE_IN_LENMAX 252
+#define	MC_CMD_PCIE_TUNE_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_PCIE_TUNE_IN_LEN(num) (4+4*(num))
 /* Requested operation */
 #define	MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_OP_OFST 0
@@ -13819,6 +14432,7 @@ 
 #define	MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_ARGS_LEN 4
 #define	MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_ARGS_MINNUM 0
 #define	MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_ARGS_MAXNUM 62
+#define	MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_ARGS_MAXNUM_MCDI2 254
 
 /* MC_CMD_PCIE_TUNE_OUT msgresponse */
 #define	MC_CMD_PCIE_TUNE_OUT_LEN 0
@@ -13835,12 +14449,14 @@ 
 /* MC_CMD_PCIE_TUNE_RXEQ_GET_OUT msgresponse */
 #define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_LENMIN 4
 #define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_LENMAX 252
+#define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_LEN(num) (0+4*(num))
 /* RXEQ Parameter */
 #define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_OFST 0
 #define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_LEN 4
 #define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_MINNUM 1
 #define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_MAXNUM 63
+#define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_MAXNUM_MCDI2 255
 #define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_ID_LBN 0
 #define	MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_ID_WIDTH 8
 /* enum: Attenuation (0-15) */
@@ -13894,6 +14510,7 @@ 
 /* MC_CMD_PCIE_TUNE_RXEQ_SET_IN msgrequest */
 #define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_LENMIN 8
 #define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_LENMAX 252
+#define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_LEN(num) (4+4*(num))
 /* Requested operation */
 #define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PCIE_TUNE_OP_OFST 0
@@ -13906,6 +14523,7 @@ 
 #define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_LEN 4
 #define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_MINNUM 1
 #define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_MAXNUM 62
+#define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_MAXNUM_MCDI2 254
 #define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_ID_LBN 0
 #define	MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_ID_WIDTH 8
 /*             Enum values, see field(s): */
@@ -13938,12 +14556,14 @@ 
 /* MC_CMD_PCIE_TUNE_TXEQ_GET_OUT msgresponse */
 #define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_LENMIN 4
 #define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_LENMAX 252
+#define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_LEN(num) (0+4*(num))
 /* RXEQ Parameter */
 #define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_OFST 0
 #define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_LEN 4
 #define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_MINNUM 1
 #define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_MAXNUM 63
+#define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_MAXNUM_MCDI2 255
 #define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_ID_LBN 0
 #define	MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_ID_WIDTH 8
 /* enum: TxMargin (PIPE) */
@@ -13991,11 +14611,13 @@ 
 /* MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT msgresponse */
 #define	MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_LENMIN 0
 #define	MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_LENMAX 252
+#define	MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_LEN(num) (0+2*(num))
 #define	MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_OFST 0
 #define	MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_LEN 2
 #define	MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MINNUM 0
 #define	MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MAXNUM 126
+#define	MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MAXNUM_MCDI2 510
 
 /* MC_CMD_PCIE_TUNE_BIST_SQUARE_WAVE_IN msgrequest */
 #define	MC_CMD_PCIE_TUNE_BIST_SQUARE_WAVE_IN_LEN 0
@@ -14146,6 +14768,7 @@ 
 /* MC_CMD_LICENSING_GET_ID_V3_OUT msgresponse */
 #define	MC_CMD_LICENSING_GET_ID_V3_OUT_LENMIN 8
 #define	MC_CMD_LICENSING_GET_ID_V3_OUT_LENMAX 252
+#define	MC_CMD_LICENSING_GET_ID_V3_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_LICENSING_GET_ID_V3_OUT_LEN(num) (8+1*(num))
 /* type of license (eg 3) */
 #define	MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_TYPE_OFST 0
@@ -14158,6 +14781,7 @@ 
 #define	MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_ID_LEN 1
 #define	MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_ID_MINNUM 0
 #define	MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_ID_MAXNUM 244
+#define	MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_ID_MAXNUM_MCDI2 1012
 
 
 /***********************************/
@@ -14280,6 +14904,7 @@ 
 /* MC_CMD_LICENSED_APP_OP_IN msgrequest */
 #define	MC_CMD_LICENSED_APP_OP_IN_LENMIN 8
 #define	MC_CMD_LICENSED_APP_OP_IN_LENMAX 252
+#define	MC_CMD_LICENSED_APP_OP_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_LICENSED_APP_OP_IN_LEN(num) (8+4*(num))
 /* application ID */
 #define	MC_CMD_LICENSED_APP_OP_IN_APP_ID_OFST 0
@@ -14296,16 +14921,19 @@ 
 #define	MC_CMD_LICENSED_APP_OP_IN_ARGS_LEN 4
 #define	MC_CMD_LICENSED_APP_OP_IN_ARGS_MINNUM 0
 #define	MC_CMD_LICENSED_APP_OP_IN_ARGS_MAXNUM 61
+#define	MC_CMD_LICENSED_APP_OP_IN_ARGS_MAXNUM_MCDI2 253
 
 /* MC_CMD_LICENSED_APP_OP_OUT msgresponse */
 #define	MC_CMD_LICENSED_APP_OP_OUT_LENMIN 0
 #define	MC_CMD_LICENSED_APP_OP_OUT_LENMAX 252
+#define	MC_CMD_LICENSED_APP_OP_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_LICENSED_APP_OP_OUT_LEN(num) (0+4*(num))
 /* result specific to this particular operation */
 #define	MC_CMD_LICENSED_APP_OP_OUT_RESULT_OFST 0
 #define	MC_CMD_LICENSED_APP_OP_OUT_RESULT_LEN 4
 #define	MC_CMD_LICENSED_APP_OP_OUT_RESULT_MINNUM 0
 #define	MC_CMD_LICENSED_APP_OP_OUT_RESULT_MAXNUM 63
+#define	MC_CMD_LICENSED_APP_OP_OUT_RESULT_MAXNUM_MCDI2 255
 
 /* MC_CMD_LICENSED_APP_OP_VALIDATE_IN msgrequest */
 #define	MC_CMD_LICENSED_APP_OP_VALIDATE_IN_LEN 72
@@ -14589,6 +15217,7 @@ 
 /* MC_CMD_SET_PARSER_DISP_CONFIG_IN msgrequest */
 #define	MC_CMD_SET_PARSER_DISP_CONFIG_IN_LENMIN 12
 #define	MC_CMD_SET_PARSER_DISP_CONFIG_IN_LENMAX 252
+#define	MC_CMD_SET_PARSER_DISP_CONFIG_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_SET_PARSER_DISP_CONFIG_IN_LEN(num) (8+4*(num))
 /* the type of configuration setting to change */
 #define	MC_CMD_SET_PARSER_DISP_CONFIG_IN_TYPE_OFST 0
@@ -14614,6 +15243,7 @@ 
 #define	MC_CMD_SET_PARSER_DISP_CONFIG_IN_VALUE_LEN 4
 #define	MC_CMD_SET_PARSER_DISP_CONFIG_IN_VALUE_MINNUM 1
 #define	MC_CMD_SET_PARSER_DISP_CONFIG_IN_VALUE_MAXNUM 61
+#define	MC_CMD_SET_PARSER_DISP_CONFIG_IN_VALUE_MAXNUM_MCDI2 253
 
 /* MC_CMD_SET_PARSER_DISP_CONFIG_OUT msgresponse */
 #define	MC_CMD_SET_PARSER_DISP_CONFIG_OUT_LEN 0
@@ -14644,6 +15274,7 @@ 
 /* MC_CMD_GET_PARSER_DISP_CONFIG_OUT msgresponse */
 #define	MC_CMD_GET_PARSER_DISP_CONFIG_OUT_LENMIN 4
 #define	MC_CMD_GET_PARSER_DISP_CONFIG_OUT_LENMAX 252
+#define	MC_CMD_GET_PARSER_DISP_CONFIG_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_GET_PARSER_DISP_CONFIG_OUT_LEN(num) (0+4*(num))
 /* current value: the details depend on the type of configuration setting being
  * read
@@ -14652,6 +15283,7 @@ 
 #define	MC_CMD_GET_PARSER_DISP_CONFIG_OUT_VALUE_LEN 4
 #define	MC_CMD_GET_PARSER_DISP_CONFIG_OUT_VALUE_MINNUM 1
 #define	MC_CMD_GET_PARSER_DISP_CONFIG_OUT_VALUE_MAXNUM 63
+#define	MC_CMD_GET_PARSER_DISP_CONFIG_OUT_VALUE_MAXNUM_MCDI2 255
 
 
 /***********************************/
@@ -14817,7 +15449,9 @@ 
 
 /* MC_CMD_GET_PORT_MODES_OUT msgresponse */
 #define	MC_CMD_GET_PORT_MODES_OUT_LEN 12
-/* Bitmask of port modes available on the board (indexed by TLV_PORT_MODE_*) */
+/* Bitmask of port modes available on the board (indexed by TLV_PORT_MODE_*)
+ * that are supported for customer use in production firmware.
+ */
 #define	MC_CMD_GET_PORT_MODES_OUT_MODES_OFST 0
 #define	MC_CMD_GET_PORT_MODES_OUT_MODES_LEN 4
 /* Default (canonical) board mode */
@@ -14827,6 +15461,58 @@ 
 #define	MC_CMD_GET_PORT_MODES_OUT_CURRENT_MODE_OFST 8
 #define	MC_CMD_GET_PORT_MODES_OUT_CURRENT_MODE_LEN 4
 
+/* MC_CMD_GET_PORT_MODES_OUT_V2 msgresponse */
+#define	MC_CMD_GET_PORT_MODES_OUT_V2_LEN 16
+/* Bitmask of port modes available on the board (indexed by TLV_PORT_MODE_*)
+ * that are supported for customer use in production firmware.
+ */
+#define	MC_CMD_GET_PORT_MODES_OUT_V2_MODES_OFST 0
+#define	MC_CMD_GET_PORT_MODES_OUT_V2_MODES_LEN 4
+/* Default (canonical) board mode */
+#define	MC_CMD_GET_PORT_MODES_OUT_V2_DEFAULT_MODE_OFST 4
+#define	MC_CMD_GET_PORT_MODES_OUT_V2_DEFAULT_MODE_LEN 4
+/* Current board mode */
+#define	MC_CMD_GET_PORT_MODES_OUT_V2_CURRENT_MODE_OFST 8
+#define	MC_CMD_GET_PORT_MODES_OUT_V2_CURRENT_MODE_LEN 4
+/* Bitmask of engineering port modes available on the board (indexed by
+ * TLV_PORT_MODE_*). A superset of MC_CMD_GET_PORT_MODES_OUT/MODES that
+ * contains all modes implemented in firmware for a particular board. Modes
+ * listed in MODES are considered production modes and should be exposed in
+ * userland tools. Modes listed in in ENGINEERING_MODES, but not in MODES
+ * should be considered hidden (not to be exposed in userland tools) and for
+ * engineering use only. There are no other semantic differences and any mode
+ * listed in either MODES or ENGINEERING_MODES can be set on the board.
+ */
+#define	MC_CMD_GET_PORT_MODES_OUT_V2_ENGINEERING_MODES_OFST 12
+#define	MC_CMD_GET_PORT_MODES_OUT_V2_ENGINEERING_MODES_LEN 4
+
+
+/***********************************/
+/* MC_CMD_OVERRIDE_PORT_MODE
+ * Override flash config port mode for subsequent MC reboot(s). Override data
+ * is stored in the presistent data section of DMEM and activated on next MC
+ * warm reboot. A cold reboot resets the override. It is assumed that a
+ * sufficient number of PFs are available and that port mapping is valid for
+ * the new port mode, as the override does not affect PF configuration.
+ */
+#define	MC_CMD_OVERRIDE_PORT_MODE 0x137
+#undef	MC_CMD_0x137_PRIVILEGE_CTG
+
+#define	MC_CMD_0x137_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_OVERRIDE_PORT_MODE_IN msgrequest */
+#define	MC_CMD_OVERRIDE_PORT_MODE_IN_LEN 8
+#define	MC_CMD_OVERRIDE_PORT_MODE_IN_FLAGS_OFST 0
+#define	MC_CMD_OVERRIDE_PORT_MODE_IN_FLAGS_LEN 4
+#define	MC_CMD_OVERRIDE_PORT_MODE_IN_ENABLE_LBN 0
+#define	MC_CMD_OVERRIDE_PORT_MODE_IN_ENABLE_WIDTH 1
+/* New mode (TLV_PORT_MODE_*) to set, if override enabled */
+#define	MC_CMD_OVERRIDE_PORT_MODE_IN_MODE_OFST 4
+#define	MC_CMD_OVERRIDE_PORT_MODE_IN_MODE_LEN 4
+
+/* MC_CMD_OVERRIDE_PORT_MODE_OUT msgresponse */
+#define	MC_CMD_OVERRIDE_PORT_MODE_OUT_LEN 0
+
 
 /***********************************/
 /* MC_CMD_READ_ATB
@@ -15145,12 +15831,14 @@ 
 /* MC_CMD_XPM_READ_BYTES_OUT msgresponse */
 #define	MC_CMD_XPM_READ_BYTES_OUT_LENMIN 0
 #define	MC_CMD_XPM_READ_BYTES_OUT_LENMAX 252
+#define	MC_CMD_XPM_READ_BYTES_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_XPM_READ_BYTES_OUT_LEN(num) (0+1*(num))
 /* Data */
 #define	MC_CMD_XPM_READ_BYTES_OUT_DATA_OFST 0
 #define	MC_CMD_XPM_READ_BYTES_OUT_DATA_LEN 1
 #define	MC_CMD_XPM_READ_BYTES_OUT_DATA_MINNUM 0
 #define	MC_CMD_XPM_READ_BYTES_OUT_DATA_MAXNUM 252
+#define	MC_CMD_XPM_READ_BYTES_OUT_DATA_MAXNUM_MCDI2 1020
 
 
 /***********************************/
@@ -15165,6 +15853,7 @@ 
 /* MC_CMD_XPM_WRITE_BYTES_IN msgrequest */
 #define	MC_CMD_XPM_WRITE_BYTES_IN_LENMIN 8
 #define	MC_CMD_XPM_WRITE_BYTES_IN_LENMAX 252
+#define	MC_CMD_XPM_WRITE_BYTES_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_XPM_WRITE_BYTES_IN_LEN(num) (8+1*(num))
 /* Start address (byte) */
 #define	MC_CMD_XPM_WRITE_BYTES_IN_ADDR_OFST 0
@@ -15177,6 +15866,7 @@ 
 #define	MC_CMD_XPM_WRITE_BYTES_IN_DATA_LEN 1
 #define	MC_CMD_XPM_WRITE_BYTES_IN_DATA_MINNUM 0
 #define	MC_CMD_XPM_WRITE_BYTES_IN_DATA_MAXNUM 244
+#define	MC_CMD_XPM_WRITE_BYTES_IN_DATA_MAXNUM_MCDI2 1012
 
 /* MC_CMD_XPM_WRITE_BYTES_OUT msgresponse */
 #define	MC_CMD_XPM_WRITE_BYTES_OUT_LEN 0
@@ -15203,6 +15893,7 @@ 
 /* MC_CMD_XPM_READ_SECTOR_OUT msgresponse */
 #define	MC_CMD_XPM_READ_SECTOR_OUT_LENMIN 4
 #define	MC_CMD_XPM_READ_SECTOR_OUT_LENMAX 36
+#define	MC_CMD_XPM_READ_SECTOR_OUT_LENMAX_MCDI2 36
 #define	MC_CMD_XPM_READ_SECTOR_OUT_LEN(num) (4+1*(num))
 /* Sector type */
 #define	MC_CMD_XPM_READ_SECTOR_OUT_TYPE_OFST 0
@@ -15217,6 +15908,7 @@ 
 #define	MC_CMD_XPM_READ_SECTOR_OUT_DATA_LEN 1
 #define	MC_CMD_XPM_READ_SECTOR_OUT_DATA_MINNUM 0
 #define	MC_CMD_XPM_READ_SECTOR_OUT_DATA_MAXNUM 32
+#define	MC_CMD_XPM_READ_SECTOR_OUT_DATA_MAXNUM_MCDI2 32
 
 
 /***********************************/
@@ -15231,6 +15923,7 @@ 
 /* MC_CMD_XPM_WRITE_SECTOR_IN msgrequest */
 #define	MC_CMD_XPM_WRITE_SECTOR_IN_LENMIN 12
 #define	MC_CMD_XPM_WRITE_SECTOR_IN_LENMAX 44
+#define	MC_CMD_XPM_WRITE_SECTOR_IN_LENMAX_MCDI2 44
 #define	MC_CMD_XPM_WRITE_SECTOR_IN_LEN(num) (12+1*(num))
 /* If writing fails due to an uncorrectable error, try up to RETRIES following
  * sectors (or until no more space available). If 0, only one write attempt is
@@ -15254,6 +15947,7 @@ 
 #define	MC_CMD_XPM_WRITE_SECTOR_IN_DATA_LEN 1
 #define	MC_CMD_XPM_WRITE_SECTOR_IN_DATA_MINNUM 0
 #define	MC_CMD_XPM_WRITE_SECTOR_IN_DATA_MAXNUM 32
+#define	MC_CMD_XPM_WRITE_SECTOR_IN_DATA_MAXNUM_MCDI2 32
 
 /* MC_CMD_XPM_WRITE_SECTOR_OUT msgresponse */
 #define	MC_CMD_XPM_WRITE_SECTOR_OUT_LEN 4
@@ -15302,6 +15996,7 @@ 
 /* MC_CMD_XPM_BLANK_CHECK_OUT msgresponse */
 #define	MC_CMD_XPM_BLANK_CHECK_OUT_LENMIN 4
 #define	MC_CMD_XPM_BLANK_CHECK_OUT_LENMAX 252
+#define	MC_CMD_XPM_BLANK_CHECK_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_XPM_BLANK_CHECK_OUT_LEN(num) (4+2*(num))
 /* Total number of bad (non-blank) locations */
 #define	MC_CMD_XPM_BLANK_CHECK_OUT_BAD_COUNT_OFST 0
@@ -15313,6 +16008,7 @@ 
 #define	MC_CMD_XPM_BLANK_CHECK_OUT_BAD_ADDR_LEN 2
 #define	MC_CMD_XPM_BLANK_CHECK_OUT_BAD_ADDR_MINNUM 0
 #define	MC_CMD_XPM_BLANK_CHECK_OUT_BAD_ADDR_MAXNUM 124
+#define	MC_CMD_XPM_BLANK_CHECK_OUT_BAD_ADDR_MAXNUM_MCDI2 508
 
 
 /***********************************/
@@ -15648,12 +16344,14 @@ 
 /* MC_CMD_GET_SECURITY_RULESET_VERSION_OUT msgresponse */
 #define	MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LENMIN 1
 #define	MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LENMAX 252
+#define	MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LEN(num) (0+1*(num))
 /* Opaque hash value; length may vary depending on the hash scheme used */
 #define	MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_OFST 0
 #define	MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_LEN 1
 #define	MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_MINNUM 1
 #define	MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_MAXNUM 252
+#define	MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_MAXNUM_MCDI2 1020
 
 
 /***********************************/
@@ -15678,6 +16376,7 @@ 
 /* MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT msgresponse */
 #define	MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LENMIN 4
 #define	MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LENMAX 252
+#define	MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LEN(num) (4+4*(num))
 /* the number of new counter IDs allocated (may be less than the number
  * requested if resources are unavailable)
@@ -15689,6 +16388,7 @@ 
 #define	MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_LEN 4
 #define	MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_MINNUM 0
 #define	MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_MAXNUM 62
+#define	MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_MAXNUM_MCDI2 254
 
 
 /***********************************/
@@ -15707,6 +16407,7 @@ 
 /* MC_CMD_SECURITY_RULE_COUNTER_FREE_IN msgrequest */
 #define	MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LENMIN 4
 #define	MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LENMAX 252
+#define	MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LEN(num) (4+4*(num))
 /* the number of counter IDs to free */
 #define	MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_NUM_COUNTERS_OFST 0
@@ -15716,6 +16417,7 @@ 
 #define	MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_LEN 4
 #define	MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_MINNUM 0
 #define	MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_MAXNUM 62
+#define	MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_MAXNUM_MCDI2 254
 
 /* MC_CMD_SECURITY_RULE_COUNTER_FREE_OUT msgresponse */
 #define	MC_CMD_SECURITY_RULE_COUNTER_FREE_OUT_LEN 0
@@ -15739,6 +16441,7 @@ 
 /* MC_CMD_SUBNET_MAP_SET_NODE_IN msgrequest */
 #define	MC_CMD_SUBNET_MAP_SET_NODE_IN_LENMIN 6
 #define	MC_CMD_SUBNET_MAP_SET_NODE_IN_LENMAX 252
+#define	MC_CMD_SUBNET_MAP_SET_NODE_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_SUBNET_MAP_SET_NODE_IN_LEN(num) (4+2*(num))
 /* node to update in the range 0 .. SUBNET_MAP_NUM_NODES-1 */
 #define	MC_CMD_SUBNET_MAP_SET_NODE_IN_NODE_ID_OFST 0
@@ -15752,6 +16455,7 @@ 
 #define	MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_LEN 2
 #define	MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_MINNUM 1
 #define	MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_MAXNUM 124
+#define	MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_MAXNUM_MCDI2 508
 
 /* MC_CMD_SUBNET_MAP_SET_NODE_OUT msgresponse */
 #define	MC_CMD_SUBNET_MAP_SET_NODE_OUT_LEN 0
@@ -15791,6 +16495,7 @@ 
 /* MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN msgrequest */
 #define	MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LENMIN 4
 #define	MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LENMAX 252
+#define	MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LEN(num) (0+4*(num))
 /* PORTRANGE_TREE_NUM_ENTRIES new entries, each laid out as a
  * PORTRANGE_TREE_ENTRY
@@ -15799,6 +16504,7 @@ 
 #define	MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_LEN 4
 #define	MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MINNUM 1
 #define	MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM 63
+#define	MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM_MCDI2 255
 
 /* MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_OUT msgresponse */
 #define	MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_OUT_LEN 0
@@ -15822,6 +16528,7 @@ 
 /* MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN msgrequest */
 #define	MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LENMIN 4
 #define	MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LENMAX 252
+#define	MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LEN(num) (0+4*(num))
 /* PORTRANGE_TREE_NUM_ENTRIES new entries, each laid out as a
  * PORTRANGE_TREE_ENTRY
@@ -15830,6 +16537,7 @@ 
 #define	MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_LEN 4
 #define	MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MINNUM 1
 #define	MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM 63
+#define	MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM_MCDI2 255
 
 /* MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_OUT msgresponse */
 #define	MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_OUT_LEN 0
@@ -15872,6 +16580,7 @@ 
 /* MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN msgrequest */
 #define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LENMIN 4
 #define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LENMAX 68
+#define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LENMAX_MCDI2 68
 #define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LEN(num) (4+4*(num))
 /* Flags */
 #define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_FLAGS_OFST 0
@@ -15888,6 +16597,7 @@ 
 #define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_LEN 4
 #define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_MINNUM 0
 #define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_MAXNUM 16
+#define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_MAXNUM_MCDI2 16
 
 /* MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT msgresponse */
 #define	MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT_LEN 2
@@ -16014,6 +16724,7 @@ 
 /* MC_CMD_TSA_BIND_IN_SET_KEY msgrequest */
 #define	MC_CMD_TSA_BIND_IN_SET_KEY_LENMIN 5
 #define	MC_CMD_TSA_BIND_IN_SET_KEY_LENMAX 252
+#define	MC_CMD_TSA_BIND_IN_SET_KEY_LENMAX_MCDI2 1020
 #define	MC_CMD_TSA_BIND_IN_SET_KEY_LEN(num) (4+1*(num))
 /* The operation requested. */
 #define	MC_CMD_TSA_BIND_IN_SET_KEY_OP_OFST 0
@@ -16028,6 +16739,7 @@ 
 #define	MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_LEN 1
 #define	MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_MINNUM 1
 #define	MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_MAXNUM 248
+#define	MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_MAXNUM_MCDI2 1016
 
 /* MC_CMD_TSA_BIND_IN_UNBIND msgrequest: Request an insecure unbinding
  * operation.
@@ -16045,6 +16757,7 @@ 
  */
 #define	MC_CMD_TSA_BIND_IN_UNBIND_EXT_LENMIN 93
 #define	MC_CMD_TSA_BIND_IN_UNBIND_EXT_LENMAX 252
+#define	MC_CMD_TSA_BIND_IN_UNBIND_EXT_LENMAX_MCDI2 1020
 #define	MC_CMD_TSA_BIND_IN_UNBIND_EXT_LEN(num) (92+1*(num))
 /* The operation requested. */
 #define	MC_CMD_TSA_BIND_IN_UNBIND_EXT_OP_OFST 0
@@ -16082,6 +16795,7 @@ 
 #define	MC_CMD_TSA_BIND_IN_UNBIND_EXT_SIG_LEN 1
 #define	MC_CMD_TSA_BIND_IN_UNBIND_EXT_SIG_MINNUM 1
 #define	MC_CMD_TSA_BIND_IN_UNBIND_EXT_SIG_MAXNUM 160
+#define	MC_CMD_TSA_BIND_IN_UNBIND_EXT_SIG_MAXNUM_MCDI2 928
 
 /* MC_CMD_TSA_BIND_IN_SET_UNBINDTOKEN msgrequest */
 #define	MC_CMD_TSA_BIND_IN_SET_UNBINDTOKEN_LEN 20
@@ -16106,6 +16820,7 @@ 
  */
 #define	MC_CMD_TSA_BIND_IN_DECOMMISSION_LENMIN 109
 #define	MC_CMD_TSA_BIND_IN_DECOMMISSION_LENMAX 252
+#define	MC_CMD_TSA_BIND_IN_DECOMMISSION_LENMAX_MCDI2 1020
 #define	MC_CMD_TSA_BIND_IN_DECOMMISSION_LEN(num) (108+1*(num))
 /* This is the signature of the above mentioned fields- TSAID, USER and REASON.
  * As per current requirements, the SIG opaque data blob contains ECDSA ECC-384
@@ -16118,6 +16833,7 @@ 
 #define	MC_CMD_TSA_BIND_IN_DECOMMISSION_SIG_LEN 1
 #define	MC_CMD_TSA_BIND_IN_DECOMMISSION_SIG_MINNUM 1
 #define	MC_CMD_TSA_BIND_IN_DECOMMISSION_SIG_MAXNUM 144
+#define	MC_CMD_TSA_BIND_IN_DECOMMISSION_SIG_MAXNUM_MCDI2 912
 /* The operation requested. */
 #define	MC_CMD_TSA_BIND_IN_DECOMMISSION_OP_OFST 0
 #define	MC_CMD_TSA_BIND_IN_DECOMMISSION_OP_LEN 4
@@ -16170,6 +16886,7 @@ 
  */
 #define	MC_CMD_TSA_BIND_IN_SECURE_UNBIND_LENMIN 97
 #define	MC_CMD_TSA_BIND_IN_SECURE_UNBIND_LENMAX 200
+#define	MC_CMD_TSA_BIND_IN_SECURE_UNBIND_LENMAX_MCDI2 200
 #define	MC_CMD_TSA_BIND_IN_SECURE_UNBIND_LEN(num) (96+1*(num))
 /* The operation requested, must be MC_CMD_TSA_BIND_OP_SECURE_UNBIND. */
 #define	MC_CMD_TSA_BIND_IN_SECURE_UNBIND_OP_OFST 0
@@ -16205,12 +16922,14 @@ 
 #define	MC_CMD_TSA_BIND_IN_SECURE_UNBIND_SIG_LEN 1
 #define	MC_CMD_TSA_BIND_IN_SECURE_UNBIND_SIG_MINNUM 1
 #define	MC_CMD_TSA_BIND_IN_SECURE_UNBIND_SIG_MAXNUM 104
+#define	MC_CMD_TSA_BIND_IN_SECURE_UNBIND_SIG_MAXNUM_MCDI2 104
 
 /* MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION msgrequest: Request a secure
  * decommissioning operation.
  */
 #define	MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_LENMIN 113
 #define	MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_LENMAX 216
+#define	MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_LENMAX_MCDI2 216
 #define	MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_LEN(num) (112+1*(num))
 /* The operation requested, must be MC_CMD_TSA_BIND_OP_SECURE_DECOMMISSION. */
 #define	MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_OP_OFST 0
@@ -16249,6 +16968,7 @@ 
 #define	MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_SIG_LEN 1
 #define	MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_SIG_MINNUM 1
 #define	MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_SIG_MAXNUM 104
+#define	MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_SIG_MAXNUM_MCDI2 104
 
 /* MC_CMD_TSA_BIND_IN_TEST_MCDI msgrequest: Test mode that emulates MCDI
  * interface restrictions of a bound adapter. This operation is intended for
@@ -16271,6 +16991,7 @@ 
  */
 #define	MC_CMD_TSA_BIND_OUT_GET_ID_LENMIN 15
 #define	MC_CMD_TSA_BIND_OUT_GET_ID_LENMAX 252
+#define	MC_CMD_TSA_BIND_OUT_GET_ID_LENMAX_MCDI2 1020
 #define	MC_CMD_TSA_BIND_OUT_GET_ID_LEN(num) (14+1*(num))
 /* The protocol operation code MC_CMD_TSA_BIND_OP_GET_ID that is sent back to
  * the caller.
@@ -16302,10 +17023,12 @@ 
 #define	MC_CMD_TSA_BIND_OUT_GET_ID_SIG_LEN 1
 #define	MC_CMD_TSA_BIND_OUT_GET_ID_SIG_MINNUM 1
 #define	MC_CMD_TSA_BIND_OUT_GET_ID_SIG_MAXNUM 238
+#define	MC_CMD_TSA_BIND_OUT_GET_ID_SIG_MAXNUM_MCDI2 1006
 
 /* MC_CMD_TSA_BIND_OUT_GET_TICKET msgresponse */
 #define	MC_CMD_TSA_BIND_OUT_GET_TICKET_LENMIN 5
 #define	MC_CMD_TSA_BIND_OUT_GET_TICKET_LENMAX 252
+#define	MC_CMD_TSA_BIND_OUT_GET_TICKET_LENMAX_MCDI2 1020
 #define	MC_CMD_TSA_BIND_OUT_GET_TICKET_LEN(num) (4+1*(num))
 /* The protocol operation code MC_CMD_TSA_BIND_OP_GET_TICKET that is sent back
  * to the caller.
@@ -16320,6 +17043,7 @@ 
 #define	MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_LEN 1
 #define	MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_MINNUM 1
 #define	MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_MAXNUM 248
+#define	MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_MAXNUM_MCDI2 1016
 
 /* MC_CMD_TSA_BIND_OUT_SET_KEY msgresponse */
 #define	MC_CMD_TSA_BIND_OUT_SET_KEY_LEN 4
@@ -16391,6 +17115,7 @@ 
 /* MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE msgresponse */
 #define	MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_LENMIN 9
 #define	MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_LENMAX 252
+#define	MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_LENMAX_MCDI2 1020
 #define	MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_LEN(num) (8+1*(num))
 /* The protocol operation code MC_CMD_TSA_BIND_OP_GET_CERTIFICATE that is sent
  * back to the caller.
@@ -16407,6 +17132,7 @@ 
 #define	MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_DATA_LEN 1
 #define	MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_DATA_MINNUM 1
 #define	MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_DATA_MAXNUM 244
+#define	MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_DATA_MAXNUM_MCDI2 1012
 
 /* MC_CMD_TSA_BIND_OUT_SECURE_UNBIND msgresponse: Response to secure unbind
  * request.
@@ -16501,6 +17227,7 @@ 
 /* MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT msgresponse */
 #define	MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LENMIN 5
 #define	MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LENMAX 252
+#define	MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LEN(num) (4+1*(num))
 /* indicates whether the persistent cache is valid (after completion of the
  * requested operation in the case of rollback, commit, or invalidate)
@@ -16521,6 +17248,7 @@ 
 #define	MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_LEN 1
 #define	MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_MINNUM 1
 #define	MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_MAXNUM 248
+#define	MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_MAXNUM_MCDI2 1016
 
 
 /***********************************/
@@ -16536,6 +17264,7 @@ 
 /* MC_CMD_NVRAM_PRIVATE_APPEND_IN msgrequest */
 #define	MC_CMD_NVRAM_PRIVATE_APPEND_IN_LENMIN 9
 #define	MC_CMD_NVRAM_PRIVATE_APPEND_IN_LENMAX 252
+#define	MC_CMD_NVRAM_PRIVATE_APPEND_IN_LENMAX_MCDI2 1020
 #define	MC_CMD_NVRAM_PRIVATE_APPEND_IN_LEN(num) (8+1*(num))
 /* The tag to be appended */
 #define	MC_CMD_NVRAM_PRIVATE_APPEND_IN_TAG_OFST 0
@@ -16548,6 +17277,7 @@ 
 #define	MC_CMD_NVRAM_PRIVATE_APPEND_IN_DATA_BUFFER_LEN 1
 #define	MC_CMD_NVRAM_PRIVATE_APPEND_IN_DATA_BUFFER_MINNUM 1
 #define	MC_CMD_NVRAM_PRIVATE_APPEND_IN_DATA_BUFFER_MAXNUM 244
+#define	MC_CMD_NVRAM_PRIVATE_APPEND_IN_DATA_BUFFER_MAXNUM_MCDI2 1012
 
 /* MC_CMD_NVRAM_PRIVATE_APPEND_OUT msgresponse */
 #define	MC_CMD_NVRAM_PRIVATE_APPEND_OUT_LEN 0
@@ -16573,6 +17303,7 @@ 
 /* MC_CMD_XPM_VERIFY_CONTENTS_OUT msgresponse */
 #define	MC_CMD_XPM_VERIFY_CONTENTS_OUT_LENMIN 12
 #define	MC_CMD_XPM_VERIFY_CONTENTS_OUT_LENMAX 252
+#define	MC_CMD_XPM_VERIFY_CONTENTS_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_XPM_VERIFY_CONTENTS_OUT_LEN(num) (12+1*(num))
 /* Number of sectors found (test builds only) */
 #define	MC_CMD_XPM_VERIFY_CONTENTS_OUT_NUM_SECTORS_OFST 0
@@ -16588,6 +17319,7 @@ 
 #define	MC_CMD_XPM_VERIFY_CONTENTS_OUT_SIGNATURE_LEN 1
 #define	MC_CMD_XPM_VERIFY_CONTENTS_OUT_SIGNATURE_MINNUM 0
 #define	MC_CMD_XPM_VERIFY_CONTENTS_OUT_SIGNATURE_MAXNUM 240
+#define	MC_CMD_XPM_VERIFY_CONTENTS_OUT_SIGNATURE_MAXNUM_MCDI2 1008
 
 
 /***********************************/
@@ -16969,6 +17701,8 @@ 
  * match any black/white-list filters and was denied by the default filter
  */
 #define	MC_CMD_TSA_INFO_OP_PKT_SAMPLE 0x2
+/* enum: Information about an unbind or decommission attempt. */
+#define	MC_CMD_TSA_INFO_OP_UNBIND 0x3
 
 /* MC_CMD_TSA_INFO_IN_LOCAL_IP msgrequest:
  *
@@ -17073,6 +17807,34 @@ 
 #define	MC_CMD_TSA_INFO_IN_PKT_SAMPLE_PACKET_DATA_LEN 1
 #define	MC_CMD_TSA_INFO_IN_PKT_SAMPLE_PACKET_DATA_NUM 128
 
+/* MC_CMD_TSA_INFO_IN_UNBIND msgrequest: Information about an unbind or
+ * decommission attempt. The purpose of this event is to let the controller
+ * know about unbind and decommission attempts (both successful and failed)
+ * received from the adapter host. The event is not sent if the unbind or
+ * decommission request was received from the controller.
+ */
+#define	MC_CMD_TSA_INFO_IN_UNBIND_LEN 12
+#define	MC_CMD_TSA_INFO_IN_UNBIND_OP_HDR_OFST 0
+#define	MC_CMD_TSA_INFO_IN_UNBIND_OP_HDR_LEN 4
+#define	MC_CMD_TSA_INFO_IN_UNBIND_OP_LBN 0
+#define	MC_CMD_TSA_INFO_IN_UNBIND_OP_WIDTH 16
+/* Type of the unbind attempt. */
+#define	MC_CMD_TSA_INFO_IN_UNBIND_TYPE_OFST 4
+#define	MC_CMD_TSA_INFO_IN_UNBIND_TYPE_LEN 4
+/* enum: This event is sent because MC_CMD_TSA_BIND_OP_SECURE_UNBIND was
+ * received from the adapter local host.
+ */
+#define	MC_CMD_TSA_INFO_UNBIND_TYPE_SECURE_UNBIND 0x1
+/* enum: This event is sent because MC_CMD_TSA_BIND_OP_SECURE_DECOMMISSION was
+ * received from the adapter local host.
+ */
+#define	MC_CMD_TSA_INFO_UNBIND_TYPE_SECURE_DECOMMISSION 0x2
+/* Result of the attempt. */
+#define	MC_CMD_TSA_INFO_IN_UNBIND_RESULT_OFST 8
+#define	MC_CMD_TSA_INFO_IN_UNBIND_RESULT_LEN 4
+/*            Enum values, see field(s): */
+/*               MC_CMD_TSA_BIND/MC_CMD_TSA_BIND_OUT_SECURE_UNBIND/RESULT */
+
 /* MC_CMD_TSA_INFO_OUT msgresponse */
 #define	MC_CMD_TSA_INFO_OUT_LEN 0
 
@@ -17281,6 +18043,7 @@ 
 /* MC_CMD_TSA_STATISTICS_IN_READ_CLEAR msgrequest */
 #define	MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_LENMIN 20
 #define	MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_LENMAX 252
+#define	MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_LENMAX_MCDI2 1020
 #define	MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_LEN(num) (16+4*(num))
 /* TSA statistics sub-operation code */
 #define	MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_OP_CODE_OFST 0
@@ -17315,10 +18078,12 @@ 
 #define	MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_COUNTER_ID_LEN 4
 #define	MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_COUNTER_ID_MINNUM 1
 #define	MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_COUNTER_ID_MAXNUM 59
+#define	MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_COUNTER_ID_MAXNUM_MCDI2 251
 
 /* MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR msgresponse */
 #define	MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_LENMIN 24
 #define	MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_LENMAX 248
+#define	MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_LENMAX_MCDI2 1016
 #define	MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_LEN(num) (8+16*(num))
 /* Number of statistics counters returned in this response */
 #define	MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_NUM_STATS_OFST 0
@@ -17330,6 +18095,7 @@ 
 #define	MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_STATS_COUNTERS_LEN 16
 #define	MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_STATS_COUNTERS_MINNUM 1
 #define	MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_STATS_COUNTERS_MAXNUM 15
+#define	MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_STATS_COUNTERS_MAXNUM_MCDI2 63
 
 /* MC_TSA_STATISTICS_ENTRY structuredef */
 #define	MC_TSA_STATISTICS_ENTRY_LEN 16
@@ -17399,6 +18165,7 @@ 
 /* MC_CMD_TSA_CONFIG_IN_APPEND msgrequest */
 #define	MC_CMD_TSA_CONFIG_IN_APPEND_LENMIN 12
 #define	MC_CMD_TSA_CONFIG_IN_APPEND_LENMAX 252
+#define	MC_CMD_TSA_CONFIG_IN_APPEND_LENMAX_MCDI2 1020
 #define	MC_CMD_TSA_CONFIG_IN_APPEND_LEN(num) (12+1*(num))
 /* TSA configuration sub-operation code. The value shall be
  * MC_CMD_TSA_CONFIG_OP_APPEND.
@@ -17416,6 +18183,7 @@ 
 #define	MC_CMD_TSA_CONFIG_IN_APPEND_DATA_LEN 1
 #define	MC_CMD_TSA_CONFIG_IN_APPEND_DATA_MINNUM 0
 #define	MC_CMD_TSA_CONFIG_IN_APPEND_DATA_MAXNUM 240
+#define	MC_CMD_TSA_CONFIG_IN_APPEND_DATA_MAXNUM_MCDI2 1008
 
 /* MC_CMD_TSA_CONFIG_OUT_APPEND msgresponse */
 #define	MC_CMD_TSA_CONFIG_OUT_APPEND_LEN 0
@@ -17445,6 +18213,7 @@ 
 /* MC_CMD_TSA_CONFIG_OUT_READ msgresponse */
 #define	MC_CMD_TSA_CONFIG_OUT_READ_LENMIN 8
 #define	MC_CMD_TSA_CONFIG_OUT_READ_LENMAX 252
+#define	MC_CMD_TSA_CONFIG_OUT_READ_LENMAX_MCDI2 1020
 #define	MC_CMD_TSA_CONFIG_OUT_READ_LEN(num) (8+1*(num))
 /* The tag that was read */
 #define	MC_CMD_TSA_CONFIG_OUT_READ_TAG_OFST 0
@@ -17457,6 +18226,7 @@ 
 #define	MC_CMD_TSA_CONFIG_OUT_READ_DATA_LEN 1
 #define	MC_CMD_TSA_CONFIG_OUT_READ_DATA_MINNUM 0
 #define	MC_CMD_TSA_CONFIG_OUT_READ_DATA_MAXNUM 244
+#define	MC_CMD_TSA_CONFIG_OUT_READ_DATA_MAXNUM_MCDI2 1012
 
 /* MC_TSA_IPV4_ITEM structuredef */
 #define	MC_TSA_IPV4_ITEM_LEN 8
@@ -17515,6 +18285,7 @@ 
 /* MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4 msgrequest */
 #define	MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_LENMIN 16
 #define	MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_LENMAX 248
+#define	MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_LENMAX_MCDI2 1016
 #define	MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_LEN(num) (8+8*(num))
 /* Header containing information to identify which sub-operation of this
  * command to perform. The header contains a 16-bit op-code. Unused space in
@@ -17534,6 +18305,7 @@ 
 #define	MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_IPV4_ITEM_HI_OFST 12
 #define	MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_IPV4_ITEM_MINNUM 1
 #define	MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_IPV4_ITEM_MAXNUM 30
+#define	MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_IPV4_ITEM_MAXNUM_MCDI2 126
 
 /* MC_CMD_TSA_IPADDR_OUT_VALIDATE_IPV4 msgresponse */
 #define	MC_CMD_TSA_IPADDR_OUT_VALIDATE_IPV4_LEN 0
@@ -17541,6 +18313,7 @@ 
 /* MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4 msgrequest */
 #define	MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_LENMIN 16
 #define	MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_LENMAX 248
+#define	MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_LENMAX_MCDI2 1016
 #define	MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_LEN(num) (8+8*(num))
 /* Header containing information to identify which sub-operation of this
  * command to perform. The header contains a 16-bit op-code. Unused space in
@@ -17560,6 +18333,7 @@ 
 #define	MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_IPV4_ITEM_HI_OFST 12
 #define	MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_IPV4_ITEM_MINNUM 1
 #define	MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_IPV4_ITEM_MAXNUM 30
+#define	MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_IPV4_ITEM_MAXNUM_MCDI2 126
 
 /* MC_CMD_TSA_IPADDR_OUT_REMOVE_IPV4 msgresponse */
 #define	MC_CMD_TSA_IPADDR_OUT_REMOVE_IPV4_LEN 0
@@ -17989,6 +18763,7 @@ 
 /* MC_CMD_GET_CERTIFICATE_OUT msgresponse */
 #define	MC_CMD_GET_CERTIFICATE_OUT_LENMIN 13
 #define	MC_CMD_GET_CERTIFICATE_OUT_LENMAX 252
+#define	MC_CMD_GET_CERTIFICATE_OUT_LENMAX_MCDI2 1020
 #define	MC_CMD_GET_CERTIFICATE_OUT_LEN(num) (12+1*(num))
 /* Type of the certificate. */
 #define	MC_CMD_GET_CERTIFICATE_OUT_TYPE_OFST 0
@@ -18008,6 +18783,7 @@ 
 #define	MC_CMD_GET_CERTIFICATE_OUT_DATA_LEN 1
 #define	MC_CMD_GET_CERTIFICATE_OUT_DATA_MINNUM 1
 #define	MC_CMD_GET_CERTIFICATE_OUT_DATA_MAXNUM 240
+#define	MC_CMD_GET_CERTIFICATE_OUT_DATA_MAXNUM_MCDI2 1008
 
 
 /***********************************/
@@ -18106,6 +18882,7 @@ 
 /* MC_CMD_LTSSM_TRACE_POLL_OUT msgresponse */
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_LENMIN 16
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_LENMAX 248
+#define	MC_CMD_LTSSM_TRACE_POLL_OUT_LENMAX_MCDI2 1016
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_LEN(num) (8+8*(num))
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_FLAGS_OFST 0
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_FLAGS_LEN 4
@@ -18124,6 +18901,7 @@ 
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_ROWS_HI_OFST 12
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_ROWS_MINNUM 0
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_ROWS_MAXNUM 30
+#define	MC_CMD_LTSSM_TRACE_POLL_OUT_ROWS_MAXNUM_MCDI2 126
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_LTSSM_STATE_LBN 0
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_LTSSM_STATE_WIDTH 6
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_RDLH_LINK_UP_LBN 6
@@ -18140,5 +18918,205 @@ 
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_TIMESTAMP_US_OFST 12
 #define	MC_CMD_LTSSM_TRACE_POLL_OUT_TIMESTAMP_US_LEN 4
 
+
+/***********************************/
+/* MC_CMD_TELEMETRY_ENABLE
+ * This command enables telemetry processing of packets, allowing a remote host
+ * to gather information and analytics passing on the card. Enabling telemetry
+ * will have a performance cost. Not supported on all hardware and datapath
+ * variants. As of writing, only supported on Medford2 running full-featured
+ * firmware variant.
+ */
+#define	MC_CMD_TELEMETRY_ENABLE 0x138
+#undef	MC_CMD_0x138_PRIVILEGE_CTG
+
+#define	MC_CMD_0x138_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_TELEMETRY_ENABLE_IN msgrequest */
+#define	MC_CMD_TELEMETRY_ENABLE_IN_LEN 4
+#define	MC_CMD_TELEMETRY_ENABLE_IN_STATE_OFST 0
+#define	MC_CMD_TELEMETRY_ENABLE_IN_STATE_LEN 4
+/* enum: Disables telemetry functionality, returns the card to default
+ * behaviour of the configured datapath variant.
+ */
+#define	MC_CMD_TELEMETRY_ENABLE_IN_DISABLE 0x0
+/* enum: Enables telemetry functionality on the currently configured datapath
+ * variant if supported.
+ */
+#define	MC_CMD_TELEMETRY_ENABLE_IN_ENABLE 0x1
+
+/* MC_CMD_TELEMETRY_ENABLE_OUT msgresponse */
+#define	MC_CMD_TELEMETRY_ENABLE_OUT_LEN 0
+
+/* TELEMETRY_CONFIG structuredef */
+#define	TELEMETRY_CONFIG_LEN 36
+/* Bitfields to identify the list of config parameters included in the command.
+ * A bit-value of 1 indicates that the relevant config parameter field is
+ * valid; 0 indicates invalid and the config parameter field must be ignored by
+ * firmware. Firmware may however apply some default values for certain
+ * parameters.
+ */
+#define	TELEMETRY_CONFIG_FLAGS_OFST 0
+#define	TELEMETRY_CONFIG_FLAGS_LEN 4
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_VALID_LBN 0
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_VALID_WIDTH 1
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_VALID_LBN 1
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_VALID_WIDTH 1
+#define	TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_VALID_LBN 2
+#define	TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_VALID_WIDTH 1
+#define	TELEMETRY_CONFIG_MAX_METRICS_COUNT_VALID_LBN 3
+#define	TELEMETRY_CONFIG_MAX_METRICS_COUNT_VALID_WIDTH 1
+#define	TELEMETRY_CONFIG_RESERVED1_LBN 4
+#define	TELEMETRY_CONFIG_RESERVED1_WIDTH 28
+#define	TELEMETRY_CONFIG_FLAGS_LBN 0
+#define	TELEMETRY_CONFIG_FLAGS_WIDTH 32
+/* Collector IPv4/IPv6 address to which latency measurements are forwarded from
+ * the adapter (as bytes in network order; set last 12 bytes to 0 for IPv4
+ * address).
+ */
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_OFST 4
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_LEN 16
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_LBN 32
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_WIDTH 128
+/* Collector Port number to which latency measurements are forwarded from the
+ * adapter (as bytes in network order).
+ */
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_OFST 20
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_LEN 2
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_LBN 160
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_WIDTH 16
+/* Unused - set to 0. */
+#define	TELEMETRY_CONFIG_RESERVED2_OFST 22
+#define	TELEMETRY_CONFIG_RESERVED2_LEN 2
+#define	TELEMETRY_CONFIG_RESERVED2_LBN 176
+#define	TELEMETRY_CONFIG_RESERVED2_WIDTH 16
+/* MAC address of the collector (as bytes in network order). */
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_MAC_ADDR_OFST 24
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_MAC_ADDR_LEN 6
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_MAC_ADDR_LBN 192
+#define	TELEMETRY_CONFIG_METRICS_COLLECTOR_MAC_ADDR_WIDTH 48
+/* Maximum number of latency measurements to be made on a telemetry flow. */
+#define	TELEMETRY_CONFIG_MAX_METRICS_COUNT_OFST 30
+#define	TELEMETRY_CONFIG_MAX_METRICS_COUNT_LEN 2
+#define	TELEMETRY_CONFIG_MAX_METRICS_COUNT_LBN 240
+#define	TELEMETRY_CONFIG_MAX_METRICS_COUNT_WIDTH 16
+/* Maximum duration for which a telemetry flow is monitored (in millisecs). */
+#define	TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_OFST 32
+#define	TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_LEN 4
+#define	TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_LBN 256
+#define	TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_WIDTH 32
+
+
+/***********************************/
+/* MC_CMD_TELEMETRY_CONFIG
+ * This top-level command includes various sub-opcodes that are used to apply
+ * (and read-back) telemetry related configuration parameters on the NIC.
+ * Reference - SF-120569-SW Telemetry Firmware Design.
+ */
+#define	MC_CMD_TELEMETRY_CONFIG 0x139
+#undef	MC_CMD_0x139_PRIVILEGE_CTG
+
+#define	MC_CMD_0x139_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_TELEMETRY_CONFIG_IN msgrequest */
+#define	MC_CMD_TELEMETRY_CONFIG_IN_LEN 4
+/* Telemetry configuration sub-operation code */
+#define	MC_CMD_TELEMETRY_CONFIG_IN_OP_OFST 0
+#define	MC_CMD_TELEMETRY_CONFIG_IN_OP_LEN 4
+/* enum: Configure parameters for telemetry measurements. */
+#define	MC_CMD_TELEMETRY_CONFIG_OP_SET 0x1
+/* enum: Read current values of parameters for telemetry measurements. */
+#define	MC_CMD_TELEMETRY_CONFIG_OP_GET 0x2
+
+/* MC_CMD_TELEMETRY_CONFIG_IN_SET msgrequest: This command configures the
+ * parameters necessary for tcp-latency measurements. The adapter adds a filter
+ * for every new tcp flow seen in both tx and rx directions and tracks the
+ * telemetry measurements related to the flow in a tracking table. Entries in
+ * the tracking table live as long as N measurements are made on the flow or
+ * the flow has been in the tracking table for the maximum configured duration.
+ * Telemetry measurements in this command refer to tcp-latency measurements for
+ * data-to-ack latency as well as data-to-data latency. All telemetry
+ * measurements are bundled into a UDP packet and forwarded to a collector
+ * whose IP address is configured using this command.
+ */
+#define	MC_CMD_TELEMETRY_CONFIG_IN_SET_LEN 40
+/* Telemetry configuration sub-operation code. Must be set to
+ * MC_CMD_TELEMETRY_CONFIG_OP_SET.
+ */
+#define	MC_CMD_TELEMETRY_CONFIG_IN_SET_OP_OFST 0
+#define	MC_CMD_TELEMETRY_CONFIG_IN_SET_OP_LEN 4
+/* struct of type TELEMETRY_CONFIG. */
+#define	MC_CMD_TELEMETRY_CONFIG_IN_SET_PARAMETERS_OFST 4
+#define	MC_CMD_TELEMETRY_CONFIG_IN_SET_PARAMETERS_LEN 36
+
+/* MC_CMD_TELEMETRY_CONFIG_OUT_SET msgresponse */
+#define	MC_CMD_TELEMETRY_CONFIG_OUT_SET_LEN 0
+
+/* MC_CMD_TELEMETRY_CONFIG_IN_GET msgrequest: This command reads out the
+ * current values of config parameters necessary for tcp-latency measurements.
+ * See MC_CMD_TELEMETRY_SET_CONFIG for more information about the configuration
+ * parameters.
+ */
+#define	MC_CMD_TELEMETRY_CONFIG_IN_GET_LEN 4
+/* Telemetry configuration sub-operation code. Must be set to
+ * MC_CMD_TELEMETRY_CONFIG_OP_GET.
+ */
+#define	MC_CMD_TELEMETRY_CONFIG_IN_GET_OP_OFST 0
+#define	MC_CMD_TELEMETRY_CONFIG_IN_GET_OP_LEN 4
+
+/* MC_CMD_TELEMETRY_CONFIG_OUT_GET msgresponse */
+#define	MC_CMD_TELEMETRY_CONFIG_OUT_GET_LEN 36
+/* struct of type TELEMETRY_CONFIG. */
+#define	MC_CMD_TELEMETRY_CONFIG_OUT_GET_PARAMETERS_OFST 0
+#define	MC_CMD_TELEMETRY_CONFIG_OUT_GET_PARAMETERS_LEN 36
+
+/* EF100_MCDI_EVENT structuredef: The structure of an MCDI_EVENT on EF100
+ * platforms
+ */
+#define	EF100_MCDI_EVENT_LEN 8
+/* Defined by QMDA. Will be 1 for all SFC events */
+#define	EF100_MCDI_EVENT_EV_DATA_FORMAT_LBN 0
+#define	EF100_MCDI_EVENT_EV_DATA_FORMAT_WIDTH 1
+/* Defined by QMDA. The phase bit, changes each time round the event ring */
+#define	EF100_MCDI_EVENT_EV_EVQ_PHASE_LBN 1
+#define	EF100_MCDI_EVENT_EV_EVQ_PHASE_WIDTH 1
+/* Defined by QDMA. Meaning unclear. */
+#define	EF100_MCDI_EVENT_EV_ERROR_LBN 2
+#define	EF100_MCDI_EVENT_EV_ERROR_WIDTH 1
+/* Defined by QMDA. Indicates a descriptor was consumed. */
+#define	EF100_MCDI_EVENT_EV_DESC_USED_LBN 3
+#define	EF100_MCDI_EVENT_EV_DESC_USED_WIDTH 1
+/* Indicates the top-level type of the event. Event types are as documented in
+ * SF-119689-TC and defined in events.yml. For MCDI events it's always
+ * EF100_EV_MCDI. HW can generate other event type for its events.
+ */
+#define	EF100_MCDI_EVENT_EV_TYPE_LBN 4
+#define	EF100_MCDI_EVENT_EV_TYPE_WIDTH 4
+#define	EF100_MCDI_EVENT_CODE_OFST 1
+#define	EF100_MCDI_EVENT_CODE_LEN 1
+/*            Enum values, see field(s): */
+/*               MCDI_EVENT/CODE */
+#define	EF100_MCDI_EVENT_CODE_LBN 8
+#define	EF100_MCDI_EVENT_CODE_WIDTH 8
+/* Data associated with PTP events which doesn't fit into the main DATA field
+ */
+#define	EF100_MCDI_EVENT_PTP_DATA_OFST 2
+#define	EF100_MCDI_EVENT_PTP_DATA_LEN 1
+#define	EF100_MCDI_EVENT_SRC_LBN 0
+#define	EF100_MCDI_EVENT_SRC_WIDTH 8
+#define	EF100_MCDI_EVENT_PTP_DATA_LBN 16
+#define	EF100_MCDI_EVENT_PTP_DATA_WIDTH 8
+/* Set if this message continues into another event */
+#define	EF100_MCDI_EVENT_CONT_LBN 24
+#define	EF100_MCDI_EVENT_CONT_WIDTH 1
+#define	EF100_MCDI_EVENT_LEVEL_LBN 25
+#define	EF100_MCDI_EVENT_LEVEL_WIDTH 3
+/*            Enum values, see field(s): */
+/*               MCDI_EVENT/LEVEL */
+/* Data associated with this event. Format depends on the event code. */
+#define	EF100_MCDI_EVENT_DATA_OFST 4
+#define	EF100_MCDI_EVENT_DATA_LEN 4
+#define	EF100_MCDI_EVENT_DATA_LBN 32
+#define	EF100_MCDI_EVENT_DATA_WIDTH 32
+
 #endif /* _SIENA_MC_DRIVER_PCOL_H */
-/*! \cidoxg_end */
diff --git a/drivers/net/sfc/base/efx_regs_mcdi_aoe.h b/drivers/net/sfc/base/efx_regs_mcdi_aoe.h
index 6aaf212f1..6bedfd71d 100644
--- a/drivers/net/sfc/base/efx_regs_mcdi_aoe.h
+++ b/drivers/net/sfc/base/efx_regs_mcdi_aoe.h
@@ -4,7 +4,11 @@ 
  * All rights reserved.
  */
 
-/*! \cidoxg_firmware_mc_cmd */
+/*
+ * This file is automatically generated. DO NOT EDIT IT.
+ * To make changes, edit the .yml files in sfregistry under doc/mcdi/ and
+ * rebuild this file with "make -C doc mcdiheaders".
+ */
 
 #ifndef _SIENA_MC_DRIVER_PCOL_AOE_H
 #define	_SIENA_MC_DRIVER_PCOL_AOE_H
@@ -271,6 +275,7 @@ 
 /* MC_CMD_FC_IN_WRITE32 msgrequest */
 #define	MC_CMD_FC_IN_WRITE32_LENMIN 16
 #define	MC_CMD_FC_IN_WRITE32_LENMAX 252
+#define	MC_CMD_FC_IN_WRITE32_LENMAX_MCDI2 1020
 #define	MC_CMD_FC_IN_WRITE32_LEN(num) (12+4*(num))
 /*            MC_CMD_FC_IN_CMD_OFST 0 */
 /*            MC_CMD_FC_IN_CMD_LEN 4 */
@@ -282,6 +287,7 @@ 
 #define	MC_CMD_FC_IN_WRITE32_BUFFER_LEN 4
 #define	MC_CMD_FC_IN_WRITE32_BUFFER_MINNUM 1
 #define	MC_CMD_FC_IN_WRITE32_BUFFER_MAXNUM 60
+#define	MC_CMD_FC_IN_WRITE32_BUFFER_MAXNUM_MCDI2 252
 
 /* MC_CMD_FC_IN_TRC_READ msgrequest */
 #define	MC_CMD_FC_IN_TRC_READ_LEN 12
@@ -517,6 +523,7 @@ 
 /* MC_CMD_FC_IN_IO_REL_WRITE32 msgrequest */
 #define	MC_CMD_FC_IN_IO_REL_WRITE32_LENMIN 20
 #define	MC_CMD_FC_IN_IO_REL_WRITE32_LENMAX 252
+#define	MC_CMD_FC_IN_IO_REL_WRITE32_LENMAX_MCDI2 1020
 #define	MC_CMD_FC_IN_IO_REL_WRITE32_LEN(num) (16+4*(num))
 /*            MC_CMD_FC_IN_CMD_OFST 0 */
 /*            MC_CMD_FC_IN_CMD_LEN 4 */
@@ -530,6 +537,7 @@ 
 #define	MC_CMD_FC_IN_IO_REL_WRITE32_BUFFER_LEN 4
 #define	MC_CMD_FC_IN_IO_REL_WRITE32_BUFFER_MINNUM 1
 #define	MC_CMD_FC_IN_IO_REL_WRITE32_BUFFER_MAXNUM 59
+#define	MC_CMD_FC_IN_IO_REL_WRITE32_BUFFER_MAXNUM_MCDI2 251
 
 /* MC_CMD_FC_IN_UHLINK msgrequest */
 #define	MC_CMD_FC_IN_UHLINK_LEN 8
@@ -1021,6 +1029,7 @@ 
 /* MC_CMD_FC_IN_SPI_WRITE msgrequest */
 #define	MC_CMD_FC_IN_SPI_WRITE_LENMIN 16
 #define	MC_CMD_FC_IN_SPI_WRITE_LENMAX 252
+#define	MC_CMD_FC_IN_SPI_WRITE_LENMAX_MCDI2 1020
 #define	MC_CMD_FC_IN_SPI_WRITE_LEN(num) (12+4*(num))
 /*            MC_CMD_FC_IN_CMD_OFST 0 */
 /*            MC_CMD_FC_IN_CMD_LEN 4 */
@@ -1032,6 +1041,7 @@ 
 #define	MC_CMD_FC_IN_SPI_WRITE_BUFFER_LEN 4
 #define	MC_CMD_FC_IN_SPI_WRITE_BUFFER_MINNUM 1
 #define	MC_CMD_FC_IN_SPI_WRITE_BUFFER_MAXNUM 60
+#define	MC_CMD_FC_IN_SPI_WRITE_BUFFER_MAXNUM_MCDI2 252
 
 /* MC_CMD_FC_IN_SPI_ERASE msgrequest */
 #define	MC_CMD_FC_IN_SPI_ERASE_LEN 16
@@ -1244,11 +1254,13 @@ 
 /* MC_CMD_FC_OUT_READ32 msgresponse */
 #define	MC_CMD_FC_OUT_READ32_LENMIN 4
 #define	MC_CMD_FC_OUT_READ32_LENMAX 252
+#define	MC_CMD_FC_OUT_READ32_LENMAX_MCDI2 1020
 #define	MC_CMD_FC_OUT_READ32_LEN(num) (0+4*(num))
 #define	MC_CMD_FC_OUT_READ32_BUFFER_OFST 0
 #define	MC_CMD_FC_OUT_READ32_BUFFER_LEN 4
 #define	MC_CMD_FC_OUT_READ32_BUFFER_MINNUM 1
 #define	MC_CMD_FC_OUT_READ32_BUFFER_MAXNUM 63
+#define	MC_CMD_FC_OUT_READ32_BUFFER_MAXNUM_MCDI2 255
 
 /* MC_CMD_FC_OUT_WRITE32 msgresponse */
 #define	MC_CMD_FC_OUT_WRITE32_LEN 0
@@ -1856,11 +1868,13 @@ 
 /* MC_CMD_FC_OUT_IO_REL_READ32 msgresponse */
 #define	MC_CMD_FC_OUT_IO_REL_READ32_LENMIN 4
 #define	MC_CMD_FC_OUT_IO_REL_READ32_LENMAX 252
+#define	MC_CMD_FC_OUT_IO_REL_READ32_LENMAX_MCDI2 1020
 #define	MC_CMD_FC_OUT_IO_REL_READ32_LEN(num) (0+4*(num))
 #define	MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_OFST 0
 #define	MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_LEN 4
 #define	MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_MINNUM 1
 #define	MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_MAXNUM 63
+#define	MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_MAXNUM_MCDI2 255
 
 /* MC_CMD_FC_OUT_IO_REL_WRITE32 msgresponse */
 #define	MC_CMD_FC_OUT_IO_REL_WRITE32_LEN 0
@@ -2011,12 +2025,14 @@ 
 /* MC_CMD_FC_OUT_DMA_READ msgresponse */
 #define	MC_CMD_FC_OUT_DMA_READ_LENMIN 1
 #define	MC_CMD_FC_OUT_DMA_READ_LENMAX 252
+#define	MC_CMD_FC_OUT_DMA_READ_LENMAX_MCDI2 1020
 #define	MC_CMD_FC_OUT_DMA_READ_LEN(num) (0+1*(num))
 /* The data read */
 #define	MC_CMD_FC_OUT_DMA_READ_DATA_OFST 0
 #define	MC_CMD_FC_OUT_DMA_READ_DATA_LEN 1
 #define	MC_CMD_FC_OUT_DMA_READ_DATA_MINNUM 1
 #define	MC_CMD_FC_OUT_DMA_READ_DATA_MAXNUM 252
+#define	MC_CMD_FC_OUT_DMA_READ_DATA_MAXNUM_MCDI2 1020
 
 /* MC_CMD_FC_OUT_TIMED_READ_SET msgresponse */
 #define	MC_CMD_FC_OUT_TIMED_READ_SET_LEN 4
@@ -2110,6 +2126,7 @@ 
 /* MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT msgresponse */
 #define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_LENMIN 8
 #define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_LENMAX 248
+#define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_LENMAX_MCDI2 1016
 #define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_LEN(num) (0+8*(num))
 #define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_SECONDS_OFST 0
 #define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_SECONDS_LEN 4
@@ -2121,15 +2138,18 @@ 
 #define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_TIMESTAMP_HI_OFST 4
 #define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_TIMESTAMP_MINNUM 0
 #define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_TIMESTAMP_MAXNUM 31
+#define	MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_TIMESTAMP_MAXNUM_MCDI2 127
 
 /* MC_CMD_FC_OUT_SPI_READ msgresponse */
 #define	MC_CMD_FC_OUT_SPI_READ_LENMIN 4
 #define	MC_CMD_FC_OUT_SPI_READ_LENMAX 252
+#define	MC_CMD_FC_OUT_SPI_READ_LENMAX_MCDI2 1020
 #define	MC_CMD_FC_OUT_SPI_READ_LEN(num) (0+4*(num))
 #define	MC_CMD_FC_OUT_SPI_READ_BUFFER_OFST 0
 #define	MC_CMD_FC_OUT_SPI_READ_BUFFER_LEN 4
 #define	MC_CMD_FC_OUT_SPI_READ_BUFFER_MINNUM 1
 #define	MC_CMD_FC_OUT_SPI_READ_BUFFER_MAXNUM 63
+#define	MC_CMD_FC_OUT_SPI_READ_BUFFER_MAXNUM_MCDI2 255
 
 /* MC_CMD_FC_OUT_SPI_WRITE msgresponse */
 #define	MC_CMD_FC_OUT_SPI_WRITE_LEN 0
@@ -2254,6 +2274,8 @@ 
 #define	MC_CMD_AOE_OP_GET_ASIC_PORTS 0x19
 /* enum: Get FC assert information and register dump */
 #define	MC_CMD_AOE_OP_GET_FC_ASSERT_INFO 0x1a
+/* enum: Set MUM startup FUSE byte with extended delay */
+#define	MC_CMD_AOE_OP_MUM_STARTUP_FUSE 0x1b
 
 /* MC_CMD_AOE_OUT msgresponse */
 #define	MC_CMD_AOE_OUT_LEN 0
@@ -2409,6 +2431,7 @@ 
 /* MC_CMD_AOE_IN_JTAG_WRITE msgrequest */
 #define	MC_CMD_AOE_IN_JTAG_WRITE_LENMIN 12
 #define	MC_CMD_AOE_IN_JTAG_WRITE_LENMAX 252
+#define	MC_CMD_AOE_IN_JTAG_WRITE_LENMAX_MCDI2 1020
 #define	MC_CMD_AOE_IN_JTAG_WRITE_LEN(num) (8+4*(num))
 /*            MC_CMD_AOE_IN_CMD_OFST 0 */
 /*            MC_CMD_AOE_IN_CMD_LEN 4 */
@@ -2418,6 +2441,7 @@ 
 #define	MC_CMD_AOE_IN_JTAG_WRITE_DATA_LEN 4
 #define	MC_CMD_AOE_IN_JTAG_WRITE_DATA_MINNUM 1
 #define	MC_CMD_AOE_IN_JTAG_WRITE_DATA_MAXNUM 61
+#define	MC_CMD_AOE_IN_JTAG_WRITE_DATA_MAXNUM_MCDI2 253
 
 /* MC_CMD_AOE_IN_FPGA_ACCESS msgrequest */
 #define	MC_CMD_AOE_IN_FPGA_ACCESS_LEN 8
@@ -2575,6 +2599,17 @@ 
 #define	MC_CMD_AOE_IN_FC_BOOT_CONTROL_BOOT_ENABLE_LBN 0
 #define	MC_CMD_AOE_IN_FC_BOOT_CONTROL_BOOT_ENABLE_WIDTH 1
 
+/* MC_CMD_AOE_IN_MUM_STARTUP_FUSE msgrequest: On AOE2, set MUM startup FUSE
+ * byte with extended delay of 64ms. On some servers with noisy power rails,
+ * this ensures that the MUM IO pins do not show spurious transitions while the
+ * power rails are stabilising. Note that this operation requires a hard-
+ * powercycle to take effect. See bug76446.
+ */
+#define	MC_CMD_AOE_IN_MUM_STARTUP_FUSE_LEN 4
+/* Must be MC_CMD_AOE_OP_MUM_STARTUP_FUSE */
+/*            MC_CMD_AOE_IN_CMD_OFST 0 */
+/*            MC_CMD_AOE_IN_CMD_LEN 4 */
+
 /* MC_CMD_AOE_OUT_GET_FC_ASSERT_INFO msgresponse */
 #define	MC_CMD_AOE_OUT_GET_FC_ASSERT_INFO_LEN 144
 /* Assertion status flag. */
@@ -2757,12 +2792,14 @@ 
 /* MC_CMD_AOE_OUT_FAN_FAILURES msgresponse */
 #define	MC_CMD_AOE_OUT_FAN_FAILURES_LENMIN 4
 #define	MC_CMD_AOE_OUT_FAN_FAILURES_LENMAX 252
+#define	MC_CMD_AOE_OUT_FAN_FAILURES_LENMAX_MCDI2 1020
 #define	MC_CMD_AOE_OUT_FAN_FAILURES_LEN(num) (0+4*(num))
 /* Failure counts for each fan */
 #define	MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_OFST 0
 #define	MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_LEN 4
 #define	MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_MINNUM 1
 #define	MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_MAXNUM 63
+#define	MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_MAXNUM_MCDI2 255
 
 /* MC_CMD_AOE_OUT_CPLD_REPROGRAM msgresponse */
 #define	MC_CMD_AOE_OUT_CPLD_REPROGRAM_LEN 4
@@ -2795,6 +2832,7 @@ 
 /* MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO msgresponse */
 #define	MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_LENMIN 5
 #define	MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_LENMAX 252
+#define	MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_LENMAX_MCDI2 1020
 #define	MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_LEN(num) (4+1*(num))
 /* in bytes */
 #define	MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATALEN_OFST 0
@@ -2803,10 +2841,12 @@ 
 #define	MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATA_LEN 1
 #define	MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATA_MINNUM 1
 #define	MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATA_MAXNUM 248
+#define	MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATA_MAXNUM_MCDI2 1016
 
 /* MC_CMD_AOE_OUT_JTAG_WRITE msgresponse */
 #define	MC_CMD_AOE_OUT_JTAG_WRITE_LENMIN 12
 #define	MC_CMD_AOE_OUT_JTAG_WRITE_LENMAX 252
+#define	MC_CMD_AOE_OUT_JTAG_WRITE_LENMAX_MCDI2 1020
 #define	MC_CMD_AOE_OUT_JTAG_WRITE_LEN(num) (8+4*(num))
 /* Used to align the in and out data blocks so the MC can re-use the cmd */
 #define	MC_CMD_AOE_OUT_JTAG_WRITE_DATALEN_OFST 0
@@ -2818,6 +2858,7 @@ 
 #define	MC_CMD_AOE_OUT_JTAG_WRITE_DATA_LEN 4
 #define	MC_CMD_AOE_OUT_JTAG_WRITE_DATA_MINNUM 1
 #define	MC_CMD_AOE_OUT_JTAG_WRITE_DATA_MAXNUM 61
+#define	MC_CMD_AOE_OUT_JTAG_WRITE_DATA_MAXNUM_MCDI2 253
 
 /* MC_CMD_AOE_OUT_FPGA_ACCESS msgresponse */
 #define	MC_CMD_AOE_OUT_FPGA_ACCESS_LEN 0
@@ -2825,6 +2866,7 @@ 
 /* MC_CMD_AOE_OUT_DDR msgresponse */
 #define	MC_CMD_AOE_OUT_DDR_LENMIN 17
 #define	MC_CMD_AOE_OUT_DDR_LENMAX 252
+#define	MC_CMD_AOE_OUT_DDR_LENMAX_MCDI2 1020
 #define	MC_CMD_AOE_OUT_DDR_LEN(num) (16+1*(num))
 /* Information on the module. */
 #define	MC_CMD_AOE_OUT_DDR_FLAGS_OFST 0
@@ -2851,6 +2893,7 @@ 
 #define	MC_CMD_AOE_OUT_DDR_SPD_LEN 1
 #define	MC_CMD_AOE_OUT_DDR_SPD_MINNUM 1
 #define	MC_CMD_AOE_OUT_DDR_SPD_MAXNUM 236
+#define	MC_CMD_AOE_OUT_DDR_SPD_MAXNUM_MCDI2 1004
 
 /* MC_CMD_AOE_OUT_SET_MTU_OFFSET msgresponse */
 #define	MC_CMD_AOE_OUT_SET_MTU_OFFSET_LEN 0
@@ -2910,5 +2953,12 @@ 
 /* MC_CMD_AOE_OUT_FC_BOOT msgresponse */
 #define	MC_CMD_AOE_OUT_FC_BOOT_LEN 0
 
+/* MC_CMD_AOE_OUT_MUM_STARTUP_FUSE msgresponse */
+#define	MC_CMD_AOE_OUT_MUM_STARTUP_FUSE_LEN 4
+/* Current value of startup FUSE byte (fusebyte#4) read back after the update
+ * operation.
+ */
+#define	MC_CMD_AOE_OUT_MUM_STARTUP_FUSE_READBACK_VALUE_OFST 0
+#define	MC_CMD_AOE_OUT_MUM_STARTUP_FUSE_READBACK_VALUE_LEN 4
+
 #endif /* _SIENA_MC_DRIVER_PCOL_AOE_H */
-/*! \cidoxg_end */