Patchwork [v2,10/10] ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs

login
register
mail settings
Submitter Miquel Raynal
Date Jan. 11, 2019, 1:31 p.m.
Message ID <20190111133133.24803-11-miquel.raynal@bootlin.com>
Download mbox | patch
Permalink /patch/697685/
State New
Headers show

Comments

Miquel Raynal - Jan. 11, 2019, 1:31 p.m.
Reference the PHY nodes from the USB controller nodes.

The USB3 host controller is wired to:
  * the first PHY of the COMPHY IP
  * the OTG-capable UTMI PHY

The USB2 host controller is wired to:
  * the host-only UTMI PHY

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index d87db3d4cc3d..f32dd1d048e4 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -347,6 +347,8 @@ 
 				marvell,usb-misc-reg = <&usb32_syscon>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 12>;
+				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
+				phy-names = "usb3-phy", "usb2-utmi-otg-phy";
 				status = "disabled";
 			};
 
@@ -367,6 +369,8 @@ 
 				reg = <0x5e000 0x1000>;
 				marvell,usb-misc-reg = <&usb2_syscon>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_utmi_host_phy>;
+				phy-names = "usb2-utmi-host-phy";
 				status = "disabled";
 			};