Patchwork power: supply: charger-manager: Fix trivial language typos

login
register
mail settings
Submitter Krzysztof Kozlowski
Date Jan. 8, 2019, 12:12 p.m.
Message ID <1546949532-30150-1-git-send-email-krzk@kernel.org>
Download mbox | patch
Permalink /patch/694705/
State New
Headers show

Comments

Krzysztof Kozlowski - Jan. 8, 2019, 12:12 p.m.
Fix few trivial language typos.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/power/supply/charger-manager.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
Sebastian Reichel - Jan. 20, 2019, 9:45 p.m.
Hi,

On Tue, Jan 08, 2019 at 01:12:12PM +0100, Krzysztof Kozlowski wrote:
> Fix few trivial language typos.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Thanks, queued.

-- Sebastian

>  drivers/power/supply/charger-manager.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
> index 38be91f21cc4..2e8db5e6de0b 100644
> --- a/drivers/power/supply/charger-manager.c
> +++ b/drivers/power/supply/charger-manager.c
> @@ -4,7 +4,7 @@
>   *
>   * This driver enables to monitor battery health and control charger
>   * during suspend-to-mem.
> - * Charger manager depends on other devices. register this later than
> + * Charger manager depends on other devices. Register this later than
>   * the depending devices.
>   *
>   * This program is free software; you can redistribute it and/or modify
> @@ -29,7 +29,7 @@
>  #include <linux/thermal.h>
>  
>  /*
> - * Default termperature threshold for charging.
> + * Default temperature threshold for charging.
>   * Every temperature units are in tenth of centigrade.
>   */
>  #define CM_DEFAULT_RECHARGE_TEMP_DIFF	50
> @@ -356,7 +356,7 @@ static bool is_polling_required(struct charger_manager *cm)
>   * Note that Charger Manager keeps the charger enabled regardless whether
>   * the charger is charging or not (because battery is full or no external
>   * power source exists) except when CM needs to disable chargers forcibly
> - * bacause of emergency causes; when the battery is overheated or too cold.
> + * because of emergency causes; when the battery is overheated or too cold.
>   */
>  static int try_charger_enable(struct charger_manager *cm, bool enable)
>  {
> @@ -643,7 +643,7 @@ static int cm_check_thermal_status(struct charger_manager *cm)
>  	if (ret) {
>  		/* FIXME:
>  		 * No information of battery temperature might
> -		 * occur hazadous result. We have to handle it
> +		 * occur hazardous result. We have to handle it
>  		 * depending on battery type.
>  		 */
>  		dev_err(cm->dev, "Failed to get battery temperature\n");
> @@ -693,7 +693,7 @@ static bool _cm_monitor(struct charger_manager *cm)
>  			uevent_notify(cm, default_event_names[temp_alrt]);
>  
>  	/*
> -	 * Check whole charging duration and discharing duration
> +	 * Check whole charging duration and discharging duration
>  	 * after full-batt.
>  	 */
>  	} else if (!cm->emergency_stop && check_charging_duration(cm)) {
> @@ -866,7 +866,7 @@ static void battout_handler(struct charger_manager *cm)
>  }
>  
>  /**
> - * misc_event_handler - Handler for other evnets
> + * misc_event_handler - Handler for other events
>   * @cm: the Charger Manager representing the battery.
>   * @type: the Charger Manager representing the battery.
>   */
> @@ -1218,7 +1218,7 @@ static int charger_extcon_init(struct charger_manager *cm,
>  }
>  
>  /**
> - * charger_manager_register_extcon - Register extcon device to recevie state
> + * charger_manager_register_extcon - Register extcon device to receive state
>   *				     of charger cable.
>   * @cm: the Charger Manager representing the battery.
>   *
> @@ -1538,7 +1538,7 @@ static struct charger_desc *of_cm_parse_desc(struct device *dev)
>  	of_property_read_u32(np, "cm-discharging-max",
>  				&desc->discharging_max_duration_ms);
>  
> -	/* battery charger regualtors */
> +	/* battery charger regulators */
>  	desc->num_charger_regulators = of_get_child_count(np);
>  	if (desc->num_charger_regulators) {
>  		struct charger_regulator *chg_regs;
> @@ -1801,7 +1801,7 @@ static int charger_manager_probe(struct platform_device *pdev)
>  
>  	/*
>  	 * Charger-manager have to check the charging state right after
> -	 * tialization of charger-manager and then update current charging
> +	 * initialization of charger-manager and then update current charging
>  	 * state.
>  	 */
>  	cm_monitor();
> -- 
> 2.7.4
>

Patch

diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index 38be91f21cc4..2e8db5e6de0b 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -4,7 +4,7 @@ 
  *
  * This driver enables to monitor battery health and control charger
  * during suspend-to-mem.
- * Charger manager depends on other devices. register this later than
+ * Charger manager depends on other devices. Register this later than
  * the depending devices.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -29,7 +29,7 @@ 
 #include <linux/thermal.h>
 
 /*
- * Default termperature threshold for charging.
+ * Default temperature threshold for charging.
  * Every temperature units are in tenth of centigrade.
  */
 #define CM_DEFAULT_RECHARGE_TEMP_DIFF	50
@@ -356,7 +356,7 @@  static bool is_polling_required(struct charger_manager *cm)
  * Note that Charger Manager keeps the charger enabled regardless whether
  * the charger is charging or not (because battery is full or no external
  * power source exists) except when CM needs to disable chargers forcibly
- * bacause of emergency causes; when the battery is overheated or too cold.
+ * because of emergency causes; when the battery is overheated or too cold.
  */
 static int try_charger_enable(struct charger_manager *cm, bool enable)
 {
@@ -643,7 +643,7 @@  static int cm_check_thermal_status(struct charger_manager *cm)
 	if (ret) {
 		/* FIXME:
 		 * No information of battery temperature might
-		 * occur hazadous result. We have to handle it
+		 * occur hazardous result. We have to handle it
 		 * depending on battery type.
 		 */
 		dev_err(cm->dev, "Failed to get battery temperature\n");
@@ -693,7 +693,7 @@  static bool _cm_monitor(struct charger_manager *cm)
 			uevent_notify(cm, default_event_names[temp_alrt]);
 
 	/*
-	 * Check whole charging duration and discharing duration
+	 * Check whole charging duration and discharging duration
 	 * after full-batt.
 	 */
 	} else if (!cm->emergency_stop && check_charging_duration(cm)) {
@@ -866,7 +866,7 @@  static void battout_handler(struct charger_manager *cm)
 }
 
 /**
- * misc_event_handler - Handler for other evnets
+ * misc_event_handler - Handler for other events
  * @cm: the Charger Manager representing the battery.
  * @type: the Charger Manager representing the battery.
  */
@@ -1218,7 +1218,7 @@  static int charger_extcon_init(struct charger_manager *cm,
 }
 
 /**
- * charger_manager_register_extcon - Register extcon device to recevie state
+ * charger_manager_register_extcon - Register extcon device to receive state
  *				     of charger cable.
  * @cm: the Charger Manager representing the battery.
  *
@@ -1538,7 +1538,7 @@  static struct charger_desc *of_cm_parse_desc(struct device *dev)
 	of_property_read_u32(np, "cm-discharging-max",
 				&desc->discharging_max_duration_ms);
 
-	/* battery charger regualtors */
+	/* battery charger regulators */
 	desc->num_charger_regulators = of_get_child_count(np);
 	if (desc->num_charger_regulators) {
 		struct charger_regulator *chg_regs;
@@ -1801,7 +1801,7 @@  static int charger_manager_probe(struct platform_device *pdev)
 
 	/*
 	 * Charger-manager have to check the charging state right after
-	 * tialization of charger-manager and then update current charging
+	 * initialization of charger-manager and then update current charging
 	 * state.
 	 */
 	cm_monitor();