Patchwork thermal: stm32: read factory settings inside stm_thermal_prepare

login
register
mail settings
Submitter David HERNANDEZ SANCHEZ
Date Dec. 6, 2018, 1:23 p.m.
Message ID <1544102603-14899-2-git-send-email-david.hernandezsanchez@st.com>
Download mbox | patch
Permalink /patch/674169/
State New
Headers show

Comments

David HERNANDEZ SANCHEZ - Dec. 6, 2018, 1:23 p.m.
Calling stm_thermal_read_factory_settings before clocking
internal peripheral causes bad register values and makes
temperature computation wrong.

Calling stm_thermal_read_factory_settings inside
stm_thermal_prepare fixes this problem as internal
peripheral is well clocked at this stage.

Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>

Fixes: 1d693155 ("thermal: add stm32 thermal driver")

-- 
2.7.4
Daniel Lezcano - Dec. 6, 2018, 1:32 p.m.
On 06/12/2018 14:23, David HERNANDEZ SANCHEZ wrote:
> Calling stm_thermal_read_factory_settings before clocking
> internal peripheral causes bad register values and makes
> temperature computation wrong.
> 
> Calling stm_thermal_read_factory_settings inside
> stm_thermal_prepare fixes this problem as internal
> peripheral is well clocked at this stage.
> 
> Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
> Fixes: 1d693155 ("thermal: add stm32 thermal driver")

Same comment as the first patch.

Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>


> diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
> index 47623da..daa1257 100644
> --- a/drivers/thermal/st/stm_thermal.c
> +++ b/drivers/thermal/st/stm_thermal.c
> @@ -532,6 +532,10 @@ static int stm_thermal_prepare(struct stm_thermal_sensor *sensor)
>  	if (ret)
>  		return ret;
>  
> +	ret = stm_thermal_read_factory_settings(sensor);
> +	if (ret)
> +		goto thermal_unprepare;
> +
>  	ret = stm_thermal_calibration(sensor);
>  	if (ret)
>  		goto thermal_unprepare;
> @@ -636,10 +640,6 @@ static int stm_thermal_probe(struct platform_device *pdev)
>  	/* Populate sensor */
>  	sensor->base = base;
>  
> -	ret = stm_thermal_read_factory_settings(sensor);
> -	if (ret)
> -		return ret;
> -
>  	sensor->clk = devm_clk_get(&pdev->dev, "pclk");
>  	if (IS_ERR(sensor->clk)) {
>  		dev_err(&pdev->dev, "%s: failed to fetch PCLK clock\n",
>
Eduardo Valentin - Dec. 15, 2018, 1:47 a.m.
On Thu, Dec 06, 2018 at 01:23:32PM +0000, David HERNANDEZ SANCHEZ wrote:
> Calling stm_thermal_read_factory_settings before clocking
> internal peripheral causes bad register values and makes
> temperature computation wrong.
> 
> Calling stm_thermal_read_factory_settings inside
> stm_thermal_prepare fixes this problem as internal
> peripheral is well clocked at this stage.
> 
> Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
> Fixes: 1d693155 ("thermal: add stm32 thermal driver")

Please append patch version in the title next time to help tracking it.

> 
> diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
> index 47623da..daa1257 100644
> --- a/drivers/thermal/st/stm_thermal.c
> +++ b/drivers/thermal/st/stm_thermal.c
> @@ -532,6 +532,10 @@ static int stm_thermal_prepare(struct stm_thermal_sensor *sensor)
>  	if (ret)
>  		return ret;
>  
> +	ret = stm_thermal_read_factory_settings(sensor);
> +	if (ret)
> +		goto thermal_unprepare;
> +
>  	ret = stm_thermal_calibration(sensor);
>  	if (ret)
>  		goto thermal_unprepare;
> @@ -636,10 +640,6 @@ static int stm_thermal_probe(struct platform_device *pdev)
>  	/* Populate sensor */
>  	sensor->base = base;
>  
> -	ret = stm_thermal_read_factory_settings(sensor);
> -	if (ret)
> -		return ret;
> -
>  	sensor->clk = devm_clk_get(&pdev->dev, "pclk");
>  	if (IS_ERR(sensor->clk)) {
>  		dev_err(&pdev->dev, "%s: failed to fetch PCLK clock\n",
> -- 
> 2.7.4

Patch

diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c

index 47623da..daa1257 100644

--- a/drivers/thermal/st/stm_thermal.c

+++ b/drivers/thermal/st/stm_thermal.c

@@ -532,6 +532,10 @@  static int stm_thermal_prepare(struct stm_thermal_sensor *sensor)

 	if (ret)
 		return ret;
 
+	ret = stm_thermal_read_factory_settings(sensor);

+	if (ret)

+		goto thermal_unprepare;

+

 	ret = stm_thermal_calibration(sensor);
 	if (ret)
 		goto thermal_unprepare;
@@ -636,10 +640,6 @@  static int stm_thermal_probe(struct platform_device *pdev)

 	/* Populate sensor */
 	sensor->base = base;
 
-	ret = stm_thermal_read_factory_settings(sensor);

-	if (ret)

-		return ret;

-

 	sensor->clk = devm_clk_get(&pdev->dev, "pclk");
 	if (IS_ERR(sensor->clk)) {
 		dev_err(&pdev->dev, "%s: failed to fetch PCLK clock\n",