Patchwork [2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support

login
register
mail settings
Submitter Roger Quadros
Date Dec. 5, 2018, 3:14 p.m.
Message ID <1544022879-5704-3-git-send-email-rogerq@ti.com>
Download mbox | patch
Permalink /patch/673195/
State New
Headers show

Comments

Roger Quadros - Dec. 5, 2018, 3:14 p.m.
The AM654 SoC from TI contains a DWC3 controller. Add
support for it.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Patch

diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
index f96e09f..fa29ff8 100644
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -3,7 +3,7 @@  TI Keystone Soc USB Controller
 DWC3 GLUE
 
 Required properties:
- - compatible: should be "ti,keystone-dwc3".
+ - compatible: should be "ti,keystone-dwc3" or "ti,am654-dwc3".
  - #address-cells, #size-cells : should be '1' if the device has sub-nodes
    with 'reg' property.
  - reg : Address and length of the register set for the USB subsystem on
@@ -21,7 +21,7 @@  SoCs only:
 - clock-names:		Must be "usb".
 
 
-The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+The following are mandatory properties for 66AK2G and AM654:
 
 - power-domains:	Should contain a phandle to a PM domain provider node
 			and an args specifier containing the USB device id