Patchwork [09/15] Platform: OLPC: add a regulator for the DCON

login
register
mail settings
Submitter Lubomir Rintel
Date Oct. 10, 2018, 5:22 p.m.
Message ID <20181010172300.317643-10-lkundrak@v3.sk>
Download mbox | patch
Permalink /patch/632579/
State New
Headers show

Comments

Lubomir Rintel - Oct. 10, 2018, 5:22 p.m.
All OLPC ECs are able to turn the power to the DCON on an off. Use the
regulator framework to expose the functionality.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/platform/olpc/Kconfig   |  1 +
 drivers/platform/olpc/olpc-ec.c | 65 +++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+)
Andy Shevchenko - Oct. 19, 2018, 1:39 p.m.
On Wed, Oct 10, 2018 at 8:23 PM Lubomir Rintel <lkundrak@v3.sk> wrote:
>
> All OLPC ECs are able to turn the power to the DCON on an off. Use the
> regulator framework to expose the functionality.

> +static int olpc_ec_set_dcon_power(struct olpc_ec_priv *ec, bool state)
> +{
> +       unsigned char ec_byte = state;
> +       int ret;
> +
> +       if (ec->dcon_enabled == state)
> +               return 0;
> +

> +       ret = olpc_ec_cmd(EC_DCON_POWER_MODE, &ec_byte, 1, NULL, 0);
> +       if (ret == 0)
> +               ec->dcon_enabled = state;
> +
> +       return ret;

I would prefer to see usual pattern, i.e.

if (ret)
 return ret;

...
return 0;

This comment applies to entire series. (Yes, you might address an old
code in a separate patch to be on consistent side)

> +}

> +       return olpc_ec_set_dcon_power(ec, 1);

defined as boolean, supplied an int. Not good.

> +       return olpc_ec_set_dcon_power(ec, 0);

Ditto.

> +static int dcon_regulator_is_enabled(struct regulator_dev *rdev)
> +       return ec->dcon_enabled;

Ditto.

Patch

diff --git a/drivers/platform/olpc/Kconfig b/drivers/platform/olpc/Kconfig
index 7c643d24ad0f..c5a872fb286f 100644
--- a/drivers/platform/olpc/Kconfig
+++ b/drivers/platform/olpc/Kconfig
@@ -6,6 +6,7 @@  config OLPC
 	select OF
 	select OF_PROMTREE if X86
 	select IRQ_DOMAIN
+	select REGULATOR
 	help
 	  Add support for detecting the unique features of the OLPC
 	  XO hardware.
diff --git a/drivers/platform/olpc/olpc-ec.c b/drivers/platform/olpc/olpc-ec.c
index b9d9a9897dd5..8f82922631a9 100644
--- a/drivers/platform/olpc/olpc-ec.c
+++ b/drivers/platform/olpc/olpc-ec.c
@@ -14,6 +14,7 @@ 
 #include <linux/workqueue.h>
 #include <linux/module.h>
 #include <linux/list.h>
+#include <linux/regulator/driver.h>
 #include <linux/olpc-ec.h>
 
 struct ec_cmd_desc {
@@ -34,6 +35,10 @@  struct olpc_ec_priv {
 	struct work_struct worker;
 	struct mutex cmd_lock;
 
+	/* DCON regulator */
+	struct regulator_dev *dcon_rdev;
+	bool dcon_enabled;
+
 	/* Pending EC commands */
 	struct list_head cmd_q;
 	spinlock_t cmd_q_lock;
@@ -347,9 +352,60 @@  static struct dentry *olpc_ec_setup_debugfs(void)
 
 #endif /* CONFIG_DEBUG_FS */
 
+static int olpc_ec_set_dcon_power(struct olpc_ec_priv *ec, bool state)
+{
+	unsigned char ec_byte = state;
+	int ret;
+
+	if (ec->dcon_enabled == state)
+		return 0;
+
+	ret = olpc_ec_cmd(EC_DCON_POWER_MODE, &ec_byte, 1, NULL, 0);
+	if (ret == 0)
+		ec->dcon_enabled = state;
+
+	return ret;
+}
+
+static int dcon_regulator_enable(struct regulator_dev *rdev)
+{
+	struct olpc_ec_priv *ec = rdev_get_drvdata(rdev);
+
+	return olpc_ec_set_dcon_power(ec, 1);
+}
+
+static int dcon_regulator_disable(struct regulator_dev *rdev)
+{
+	struct olpc_ec_priv *ec = rdev_get_drvdata(rdev);
+
+	return olpc_ec_set_dcon_power(ec, 0);
+}
+
+static int dcon_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct olpc_ec_priv *ec = rdev_get_drvdata(rdev);
+
+	return ec->dcon_enabled;
+}
+
+static struct regulator_ops dcon_regulator_ops = {
+	.enable		= dcon_regulator_enable,
+	.disable	= dcon_regulator_disable,
+	.is_enabled	= dcon_regulator_is_enabled,
+};
+
+static const struct regulator_desc dcon_desc = {
+	.name	= "dcon",
+	.id	= 0,
+	.ops	= &dcon_regulator_ops,
+	.type	= REGULATOR_VOLTAGE,
+	.owner	= THIS_MODULE,
+};
+
 static int olpc_ec_probe(struct platform_device *pdev)
 {
 	struct olpc_ec_priv *ec;
+	struct regulator_config config = { };
 	int err;
 
 	if (!ec_driver)
@@ -378,6 +434,15 @@  static int olpc_ec_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	config.dev = pdev->dev.parent;
+	config.driver_data = ec;
+	ec->dcon_enabled = true;
+	ec->dcon_rdev = devm_regulator_register(&pdev->dev, &dcon_desc, &config);
+	if (IS_ERR(ec->dcon_rdev)) {
+		dev_err(&pdev->dev, "failed to register DCON regulator\n");
+		return PTR_ERR(ec->dcon_rdev);
+	}
+
 	ec->dbgfs_dir = olpc_ec_setup_debugfs();
 
 	return err;